Search results for: 'ribbon cable pre crimped'
- Raspberry Pi B - GPIO Ribbon Cable (40-pin, 150mm)This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 36" (90 cm)SKU: POLOLU-4591 Brand: PololuThese 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 60" (150 cm)SKU: POLOLU-4595 Brand: PololuThese 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 36" (90 cm)SKU: POLOLU-4592 Brand: PololuThese 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color F-F 36" (90 cm)SKU: POLOLU-4590 Brand: PololuThese 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 24" (60 cm)SKU: POLOLU-4582 Brand: PololuThese 24" (60 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
- Ribbon Cable with Pre-Crimped Terminals 10-Color F-F 12" (30 cm)SKU: POLOLU-4578 Brand: PololuThese 12" (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 6" (15 cm)SKU: POLOLU-4577 Brand: PololuThese 6" (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 12" (30 cm)SKU: POLOLU-4580 Brand: PololuThese 12" (30 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 3" (7.5 cm)SKU: POLOLU-4573 Brand: PololuThese 3" (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
- Ribbon Cable with Pre-Crimped Terminals 10-Color M-F 60" (150 cm)SKU: POLOLU-4594 Brand: PololuThese 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on one end and male crimp pins on the...
- Ribbon Cable with Pre-Crimped Terminals 10-Color F-F 60" (150 cm)SKU: POLOLU-4593 Brand: PololuThese 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female crimp pins on both ends. Together with our 0.1"...
- Raspberry Pi GPIO 40-Pin Ribbon CableSKU: CE07581 Brand: Core ElectronicsExtend your Raspberry Pi's functionality with this rainbow ribbon cable!
- Ribbon Cable - 120mm (2mm, 2x3-Pin)SKU: CAB-29458 Brand: SparkfunThis 120mm IDC Ribbon Cable features a 2mm pitch and a 2x3-pin configuration, making it a versatile and essential component for various electronic...
- Ribbon Cable - 10 wire (3ft/90cm)SKU: CAB-10649 Brand: SparkfunRibbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
- Ribbon Cable - 10 wire (15ft/4.5m)SKU: CAB-10647 Brand: SparkfunRibbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.$14.20 AUD, inc GSTAs low as $12.92 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- Ribbon Cable - 6 wire (15ft/4.5m)SKU: CAB-10646 Brand: SparkfunRibbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.
- 6-Conductor Ribbon Cable with IDC Connectors 12"SKU: POLOLU-972 Brand: PololuThis 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded box header. It can also be used with 0.100" male header pins.
- GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3/ Pi 4 - (40 pins)SKU: ADA1988 Brand: AdafruitThat new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for...
- GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pinSKU: ADA862 Brand: AdafruitThat new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and...
- DIY HDMI Cable Parts - 100 cm HDMI Ribbon CableSKU: ADA3564 Brand: AdafruitIf you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never...$18.95 AUD, inc GSTAs low as $18.00 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- DIY HDMI Cable Parts - 10 cm HDMI Ribbon CableSKU: ADA3560 Brand: AdafruitIf you're looking to make a custom cable with any two of Adafruit's HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never...
- Ribbon Cable Premium Jumper Wires 10-Color F-F 60" (150 cm)SKU: POLOLU-4587 Brand: PololuThese 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female connectors on both ends that work with 0.1"...
- Ribbon Cable Premium Jumper Wires 10-Color M-F 60" (150 cm)SKU: POLOLU-4588 Brand: PololuThese 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male connectors on one end and female connectors on the...
- Ribbon Cable Premium Jumper Wires 10-Color M-F 36" (90 cm)SKU: POLOLU-4585 Brand: PololuThese 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male connectors on one end and female connectors on the...
How To Make and Crimp Custom Connectors
The wires in our circuits are often forgotten when we are planning our next big project, but the right connectors will a make your project look more professional and a lot easier to work with! In this tutorial, we are going to have a quick ...
Setting up Your Retroflag NESPi Case with a Heatsink and Cooling Fan
By now, you’ve probably seen the fancy new Raspberry Pi cases we’ve got available; the NESPi case by Retroflag. Designed and styled specifically for retro gaming systems such as RetroPie, it offers everything you need to turn yo...
What is a JST Connector?
JST is a standard of electrical connection used widely across a spectrum of electrical applications. It's defined as a Japanese Solderless Terminal and is manufactured by a company of the same name. The JST range includes a variety of fami...
Identify Electrical Connectors
There are a ton of electrical wire connectors, too many to elaborate on in a single guide, however there are a couple of connectors that as a maker you will come across. Often when starting your way into the electronics world all you need ...
How to Use a LCD Screen/Display with Raspberry Pi
What fun would a computer be without a screen to see what you’re doing? Well if you own a Raspberry Pi and are curious about the different ways you can connect an external display or monitor up to it, then look no further. Today we&rs...
Pan-Tilt Hat with Raspberry Pi - Quick Start Guide
Pimironi Picade Pan-Tilt Hat lets you mount and control a pan-tilt module right on top of your Raspberry Pi palm-sized computer. Setting up a Pan and Tilt system has never been easier with absolutely no soldering required! Pe...
Raspberry Pi 4 Model B - Board Revisions
After the release of the Raspberry Pi 4 Model B 1 GB and 2GB and 4GB generations there was a design revision. Now if you have any other Raspberry Pi board in your hand the impact of this design revision will not affect you. If you happen to...
Face Recognition With Raspberry Pi and OpenCV
[Update – This guide is a little outdated and we have a released a newer version of it. Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flash...
Character Displays with Particle
Crunching numbers is fine, but sometimes you really need to visualise what’s going on in the tiny brain of your Photon. There are numerous different ways to visualise data or text on a microcontroller from binary LEDs, to HDMI display...
Raspberry Pi High Quality Camera – First Pictures and Videos
[Note - Terminal Commands talked about here have been superseded with the new 'Bullseye' Raspberry Pi OS. Link here for new 'Bullseye' camera commands. If you want to use the commands found on this page download and flash the old 'Bu...
Say Cheese with Raspberry Pi Camera
Ever thought it would be cool if your Raspberry Pi could see the world like you do? You’re in luck, camera support is an integral part of the Raspberry Pi hardware, it comes with a built in CSI connector for connecting camera ...
MicroPython Board Comparison
Welcome to the benchmarking arena! We are going to put eleven microcontrollers to the test and see how they hold up against a set of fiendish tasks that we devised to push them beyond their limits. We chose most of our candidates based on t...
How to Add an SSD To Your Raspberry Pi 5 with the M.2 HAT
SSDs on the Raspberry Pi are not new. For many years now people have been enjoying NVME speeds on Raspberry Pis through the use of NVMe-to-USB adapters. But long gone are the days of annoying adapters flopping around and occupying a precio...
MOVE Mini Assembly Guide
The :MOVE MINI allows you to turn your micro:bit into a simple robot! In this guide, we will give you some tips and tricks for assembling the :MOVE mini. This is a DIY assembly item and takes 30-60 minutes to fully assemble. There is a grea...
Tiny Screens for Raspberry Pi - Waveshare 3.5 Inch LCD
There is a whole range of Sub-4 Inch Displays that attach directly to the GPIO pins of Raspberry Pi Palm-Sized Computers. Many of them are touch devices and increase the usability of your Raspberry Pi whilst making almost no size sacrifices...
Raspberry Pi AI Camera Quick-Start Guide
In this guide, we will be getting the Raspberry Pi AI camera up and running as quickly as possible, as well as taking a look at how to get started with it in your own projects. The Raspberry Pi AI camera is a unique and interesting piece ...
Which Raspberry Pi Case is Best For You?
What’s even better than the world’s most popular microcomputer sitting on your desk? When it’s sitting there in a case which protects it, makes it easier to use, and gives your desk some style. If you buy a Raspberry Pi i...
C Programming for Makers
Welcome to the C Programming Workshop for Makers! Here you'll be able to follow along with our series of easily digestible videos that cover everything you'll need to know to on your way with C programming and start making awesome projects...
Upgrade your Project for the Raspberry Pi 4
The New Version of the Raspberry Pi 4 has started going out to makers everywhere. If you are wanting to upgrade your old RPi3 project to take advantage of all the cool new features there are a few steps we are going to have to take first to...
Getting Started with Arduino Using the Sparkfun RedBoard
Welcome to the Sparkfun Inventors Kit (SIK) Ver 4.0 tutorial page. In this beginner’s tutorial, we will explore the basics of microcontroller programming and circuit electronics through a series of projects that are provided in the&nb...
Onion Omega - First Time Setup Using the Command Line
In this tutorial, we will learn how to set up the Onion Omega2/Omega2+ for the first time using the command line. While the Omega2/2+ has a graphical setup wizard and a web-based GUI called the "Console," we have found both to ...
Pycom GPy Getting Started
warning: Pycom has updated their libraries and the code listed below may not work. If you discover this and find a fix, please post it on our forum and we'll send you a $25 store credit along with a huge thank you. Go to Forum Thread. ...
How to get started with Circuit Playground
Have you heard about the Circuit Playground? It's the new all-in-one electronics platform from Adafruit. It was created to bring all the fun features of electronics and physical computing to makers, but It's dead-simple to use, solde...
Getting Started with Particle Electron
In another tutorial we looked at the Photon board from Particle, and whilst Wi-Fi is awesome for many applications, it restricts you to a localised connection. Particle have once again come to rescue and provided us with a cellular solution...
Getting Started with the Makera Carvera | Setup & First Cut
Have you just got your hands on a brand new Makera Carvera and want to get it making chips as soon as possible? Well, in this guide we will be taking a look at how to set up your Makera Carvera, as well as the Cyclone Dust Collector if yo...
What is Raspberry Pi?
Hi there! If you’re wondering what all the hype and interest surrounding Raspberry Pi is about, you’ve come to the right place. The original Raspberry Pi debuted in 2012, and is a credit card sized computer that has ports for U...
Programming with USB-Serial Converters
Thanks to huge advancements in technology over the last decade, the maker community that we know and love has thrived. It’s now easier than ever before to get started with programming and tinkering due to the innovation from brands su...
Introducing CircuitPython: Adafruit Circuit Playground Express
CircuitPython is a variant of MicroPython that is designed with ease of use and simplicity in mind, and it works great with the Adafruit Circuit Playground Express. CircuitPython is based on the very popular Python programming language, the...
PiicoDev Distance Sensor VL53L1X - Micro:bit Guide
Introduction This guide will help you read distance data in millimetres from your PiicoDev Distance Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit A PiicoDev Distance Sensor VL53L1X A PiicoDev adapter for Mic...
How to use an ESP8266 in the Arduino IDE
In August of 2014 Shanghai-based chip manufacturer, Espressif, released a ultra-cheap Serial to Wi-Fi chip called the ESP-01. At the heart of the ESP01 was an ESP8266 chip broken out into the 8 pins needed to program it via a microcontrolle...
PiicoDev RGB LED Module - Microbit Guide
Let's get started with the PiicoDev® 3x RGB LED Module. In this guide, we'll connect the LED Module to our Raspberry Pi Pico and get it working with some example code to display colourful patterns. To follow along, it's best to ...
Raspberry Pi 500+ Overview and Teardown
The Raspberry Pi 500+ is hot off the press, an all-in-one computer keyboard which is the latest version of Raspberry Pi's hundred series, and the premium version of the Pi 500. This overview will get into the nitty-gritty of what mak...
Cameras Compared for Raspberry Pi
There are so many types of cameras modules and lenses that are plug-and-play for Raspberry Pi Single Board Computers and that number is steadily increasing. From day to night, you can keep track, photograph, and record your surrou...
PiicoDev RGB LED Module - Raspberry Pi Pico Guide
Let's get started with the PiicoDev® 3x RGB LED Module. In this guide, we'll connect the LED Module to our Raspberry Pi Pico and get it working with some example code to display colourful patterns. To follow along, it's best to ...
Makerverse Essentials Kit Guide | Build Circuits and Code with MicroPython
IntroductionWelcome to the guide for the Makerverse Essentials Kit. This kit provides the fundamental hardware required to construct many of the kits in the Makerverse Kits range along with providing hardware which will continue to be usef...
How to Flash/Write Raspbian OS onto Raspberry Pi Compute Module 4 (CM4)
While the Raspberry Pi Compute Module 4s (CM4s) share a lot with the regular Pi 4 Model B, getting started with the flashing process can be quite different depending on which model you pick! This article aims to demystify that, so without f...
Internet of Things with Pycom and Adafruit IO - From Zero to Hero
Introduction We’re going from zero to hero. Starting from nothing we’ll get a WiPy communicating with Adafruit IO, an IoT service out on the Internet. We’ll be able to send data from the device to the cloud and control th...
Real Time Scanning and Storing QR Codes With Raspberry Pi and OpenCV
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flashing and using the previous Raspberry Pi ‘Buster’ OS ...
Pycom Pysense Getting Started Guide
The Pysense expansion board from Pycom has many sensors. In Pycom Pytrack Getting Started, I showed how with some Processing code we can see the real-time position of the board in 3D. That project works with the Pysense too. How about we sh...
USB MIDI With Teensy
If you’re a musician or have had anything to do with the entertainment industry, you may have heard of the term MIDI before. MIDI stands for Musical Instrument Digital Interface and was created in the mid-80’s as a way to standa...
How to Set Up a Raspberry Pi Kiosk - Launch a Fullscreen Webpage on Boot!
In this guide, we will be transforming your Raspberry Pi into a bespoke device to interface humans with the web. This guide will walk you through setting up a Pi as a dedicated kiosk device, meaning it will seamlessly and automatically lau...
Building a LoRaWAN Nano Gateway to The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. warning: this is a "nano" gateway...
MicroPython for Micro:bit Workshop
Welcome to the MicroPython for micro:bit workshop! This workshop is aimed at makers who want to start programming with MicroPython, we will be using the micro:bit as it is very easy to use so we can cover the important concepts that will ap...
Getting Started with the Grove Vision AI V2 | Power Efficient Object Detection
In this guide, we will be exploring the Grove Vision AI V2 – a microcontroller-based board capable of running YOLO and other computer vision models in real time, all while consuming a relatively tiny amount of power. We’re goin...
Object and Animal Recognition With Raspberry Pi and OpenCV
[Update – We have released a new and updated version of this guide that works on newer Raspberry Pis, runs faster, and uses a more powerful model.We are leaving this old guide up for legacy reasons and if you do choose to follow this...
Pose Estimation and Face Landmark Tracking with Raspberry Pi and OpenCV
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flashing and using the previous Raspberry Pi ‘Buster’ OS onto yo...
Addressable RGB LED Controllers
Addressable RGB LED strips are one maker favourite that can really spruce up any project or even be the star attraction of one. These strips allow you to select the colour, brightness and state of any LED in a long strip and can make for ...
Data Logging with the Micro:bit and OpenLog
The Micro:bit by BBC is a great data collection tool, it just needs a little help remembering what it has measured! This tutorial is made for those Micro:bit projects where transmitting your sensor data over radio or Bluetooth to a computer...
All Pycom Boards and Expansion Boards Compared
Pycom is a constantly groundbreaking company which produces a lot of really cool development boards and expansion shields. They have a large focus on multiple network connectivity, particularly in regards to low power, long-distance informa...
Detect Speed with a Raspberry Pi, Camera and OpenCV
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flashing and using the previous Raspberry Pi ‘Buster’ OS onto your Mi...
Hand Recognition and Finger Identification with Raspberry Pi and OpenCV
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flashing and using the previous Raspberry Pi ‘Buster’ OS onto y...
Best Glue for 3D Printed PLA Parts and a 3D Printed Ukulele
Whenever you want to print larger than your 3D printer build space you are going to find yourself wanting to combine 3D printed parts together. Furthermore, as you wrap your head around 3D printing, you learn to save on filament by printing...
Fritzing up an Arduino SHIELD
We want to show you how great Fritzing is when it comes to going from your breadboarded prototype to a polished, Etchable PCB design. We are going to utilize a completed circuit we used for our SPI Arduino tutorial that uses a shift registe...
Makerverse Audio Kit Guide | Play Music and Generate Tones
IntroductionWelcome to the guide for the Makerverse Audio Kit. This kit will allow you to build a music player, a musical keyboard, and a sound effect soundboard! To follow along you will need: The Makerverse Audio Kit The Makerverse ...
Welcome to Particle.io
What a time to be alive! It’s never been easier to get into electronics and programming with platforms like Arduino, Raspberry Pi, Chibitronics and many more. These platforms are great, but with the Internet of Things (IoT) becoming m...
Plant_io Basic Setup Guide | Automatically Water a Seedling Based on Soil Moisture
What We'll AchieveThis guide will help you set up a Plant_io controller to automatically irrigate a plant of your choice. This example focuses on germinating seeds, but this is only one option. Along the way we'll: Assemble a hardware pl...
Getting Hands-on with Sensors
What good is a robot if it can’t interact with the environment around it? Sensors are the backbone of almost every electronics project as they allow your program to make decisions based on external stimuli. We’ve got sensors for...
Writing Code Onto MicroPython Boards
You have your shiny new MicroPython or Circuit Python board and you have Installed the Firmware and connected to REPL, but now you want to put your code onto the board. To do this we need to send the files over serial. Luckily Adafruit has ...
How to Install and Setup Python on Onion Omega 2
In this installment of our Onion Omega2 tutorial series, we will cover the basic steps necessary to install and run python on the Omega2 or Omega2+. We'll cover how to install python or python3, how to install python modules and finally, w...
Using USB and Bluetooth Controllers with Python
The Raspberry Pi is an amazing piece of technology, and it’s the platform of choice for all kinds of projects. Something that makes it great is the integration of complex hardware that is taken care of for you. For example, if you wan...
ONESIE Family - 3D Printable Cases for Raspberry Pi 4 Model B
The ONESIE family of cases come in three distinct models; Stealth, Maker and Hats. This will be a guide introducing the ONESIE family, the 3D printable monocoque stealth cases for Raspberry Pi 4 Model B, talk about what makes them di...
How to Run a Python Script Automatically on Bootup / Startup with Onion Omega 2
A common issue many makers face when they move from microcontrollers to Single-Board-Computers is how to get them to run a program automatically when they are powered on. People who have cut their teeth on Arduino, Micro:bit, and other micr...
Encoding and Decoding Payloads on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Sending data to the cloud is grea...
Workaround for the RetroPie Bluetooth Security Bug
The Problem: You may find that while setting up RetroPie on your Raspberry Pi that pairing new Bluetooth controllers results in something like: During the "Please choose the security mode - Try the first one, then second if that fails",...
How to Rotate Raspberry Pi Video Display / Screen
Like many things in the Raspberry Pi ecosystem, functions such as rotating the display output can be a little unintuitive at first. Or perhaps you’re not sure how to get rid of that annoying black outline on your screen. So, we’...
How to Setup ATOM (Code / Text Editor) on Onion Omega2
In this tutorial, we will learn how to code for the Onion Omega2 on our PC, and then wirelessly upload our code using the ATOM text editor. The ATOM text editor is a powerful and easy to use text editor developed by the team at Github...
Linux In Windows
The Windows Subsystem for Linux (WSL) is a powerful new feature that lets you run a Linux terminal from within windows. You may wonder why you would want this, but it actually is great for developers. A lot of Web and open source toolchains...
Getting Started with Home Automation Using MQTT
What is MQTT? MQTT (Message Queue Telemetry Transport) is a simple and ‘lightweight’ way for internet-connected devices to send each other messages. This is important for home-automation because devices need to send messag...
Infrared (IR) Controlled Lights with CircuitPython: Adafruit Circuit Playground Express
The latest Circuit Playground board, the Adafruit Circuit Playground Express comes equipped with an onboard IR transmitter and receiver! This can be used to communicate with TVs and other household devices. You can also use infrared remote ...
Pycom Pytrack Getting Started
In this getting started guide we’ll use the Pytrack from Pycom to detect our location on Earth using the onboard GPS module and use the accelerometer to control a 3D model on the PC. I put a WiPy onto my Pytrack, connected it to ...
Wi-Fly with Feather Boards
I’ll level with you; the idea of microcontrollers and wireless networks was a little daunting to me initially. How on earth was I going to connect and control it with Wi-Fi?! But when I eventually I waded into the world of networking ...
Visual Thermometer with CircuitPython: Adafruit Circuit Playground Express
The Adafruit Circuit Playground Express comes packed with sensors, and for this tutorial, we are going to learn to use the onboard thermometer (technically a thermistor)! We will take temperature readings with the thermometer and print out ...
Hello World with the OLED FeatherWing
The OLED Featherwing by Adafruit is a particularly interesting Wing; it gives you a 128x32 monochrome OLED display right on top of your feather board. There's also three buttons to use that are internally connected to your MCU and accessibl...
Your First LoRaWAN Node on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. In the lasts article we looked at...
Using NeoPixels with Particle
Life’s better in colour right? Then why are you still using boring old regular LEDs in your project, when you could be using addressable RGB LEDs. Now LEDS that have Red, Green, and Blue integrated in a single package are nothing new,...
Fix Raspberry Pi 4 HDMI Not Working With Specific Displays
If you've had issues getting your Raspberry Pi 4 to work with specific HDMI displays (monitors, TV's etc.) this tutorial has got you covered! It's a quick fix that just requires a bit of tinkering in the config.txt file that's present on al...
Color Matching with the Light Sensor and CircuitPython: Adafruit Circuit Playground Express
The Adafruit Circuit Playground Express comes equipped with an analog light sensor, but it can be used for much more than just sensing light or darkness! The light sensor has a similar spectral response to the human eye. Its connected to an...
Ultrasonic Sensing with Pycom
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. One of the most common sensors in...
Send a Downlink from Adafruit.io via The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Any good LoRaWAN device can send ...
Stress Testing Your Raspberry Pi (for Cooling and Overclocking)
We have a more recent guide to Stress testing your Raspberry Pi, this guide has been kept here for reference. Part of the joy that is Raspberry Pi is getting stuck into it at a slightly lower level and finding out exactly what yo...
Create an installer script for Raspberry Pi
After lovingly crafting your project on a Raspberry Pi, you might want to share it with the world. The easiest way is of course just to publish a list of the commands that you executed to get everything up and running. For complex proj...
Temperature Sensing With Raspberry Pi
Is it hot in here, or is it just my Raspberry Pi? A Raspberry Pi sitting on a desk doing nothing is kind of boring. However, a Raspberry Pi that can measure the temperature and make decisions based off that information is awesome! The Rasp...
Remote Sensing with Particle Electron
Hey guys, how much fun are microcontrollers? They’re your own miniature slave to do your bidding in whatever way you choose, however as fun and all as using them to do math and crunching numbers, the real joy is seeing them interact w...
Automating Test-Equipment with Python
The full example-code is reproduced at the bottom of this article. Performing manual measurements (in bulk) is for suckers and undergraduate students. Thankfully, most lab gear comes with a digital interface like USB or Serial and you can ...
How to Make a Safe Shutdown Button for Raspberry Pi
Pulling the power to your Raspberry Pi can cause image corruptions & other issues that can damage your Pi! In this article, we will create a small push button that will work as a ‘Safe-Shutdown’ option. We’ll connect i...
How to Build an Arduino Library
Have you ever wanted to simplify or automate a task using an Arduino? Yes? Well, have you ever wanted to simplify the code required for that task into a neat collection of easy-to-use functions? Also yes? Then this tutorial is for you! In t...
Controlling Stepper Motors with the Arduino
Stepper Motors are a bit of a halfway mark between DC Motors and Servo motors, but they find a sweet spot that allows them to be perfect for certain applications. There are still a few main differences to be aware of when it comes to workin...
Pycom Expansion Board - Getting Started
Where do I start? If you’re new to programming Python is a great place to start! I’ve seen Python taught to primary school age children and I have used Python in a Machine Intelligence course at university. It’s no wonder...
Using the Accelerometer with CircuitPython: Adafruit Circuit Playground Express
At the heart of every Adafruit Circuit Playground Express lies a three-axis accelerometer. This allows us to write programs that take the orientation of the board into account. We can detect orientation and acceleration on any axis. With Ci...
Webhooks with Particle.io
Have you ever heard people talk about how amazing the Internet of Things is and how you can leverage the power of the internet by creating IoT devices, but not really known how to get started? This tutorial is for you! We’re going to ...
Circuit Playground Express TV Remote
Have you ever lost or broken a TV remote before it's time? Have you ever wanted to spice up the way you change channels or inputs on your TV? Have you got a greedy housemate who always steals the remote off you? If any of these are the case...
Light Sensing with an LDR and Pycom
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. One of the simplest sensors in an...
Moving From Arduino to Particle
In case you haven’t noticed, Internet of Things is the phrase on everyone’s lips right now; why make a device, when you can make an IoT device? And the good folks at Particle.io have made it easier than ever to create your own...
Basics: Getting Started with the Terminal on Raspberry Pi
In this tutorial we’ll be getting familiar with basic use of the Raspberry Pi terminal. We’ll cover navigating the file-system, making directories, writing and editing text files, and just touch on the use of wildcards. To get ...
Makerverse Real Time Clock with Supercapacitor Backup - Raspberry Pi Pico Guide
Introduction This guide covers the basic use of the Makerverse Supercap Real Time clock on the Raspberry Pi Pico using our RV3028 MicroPython module. The MicroPython module implements some commonly used features of the RV3028 RTC but is no...
IoT with LoRaWAN, Pycom, The Things Network & Node-RED
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. In our two previous Pycom article...
Exciting Features - Ultimaker Cura
Ultimaker Cura is an excellent slicing software to get the best out of your 3D printers and make the greatest models it possibly can, but it can do so much more! Cura is a brilliant means to inspire and expand your own creativity particular...
How to Save Games on RetroPie
So you've got your brand new RetroPie gaming kit setup, but you've got no idea how to save your games. No one wants to be starting afresh each and every time they jump onto their Pi for some light gaming. I've put together this handy guide ...
PiicoDev RGB LED Module - Raspberry Pi Guide
Let's get started with the PiicoDev® 3x RGB LED Module. In this guide, we'll connect the LED Module to our Raspberry Pi Pico and get it working with some example code to display colourful patterns. To follow along, it's best to ...
WS2812 / NeoPixel Addressable LEDs: Pycom Quickstart Guide
Sometimes all a good Pycom project needs is some colourful lights! This tutorial demonstrates how to control WS2812 LEDs with the Pycom Wipy and Lopy4. WS2812 or WS2812B LEDs (otherwise known as NeoPixels) are the most commonly used RG...
Using the APT (advance packaging tool) to ensure your Pi 4 is completely updated.
To update software in Raspbian, you can use the apt tool in a terminal. Open a terminal window from the taskbar or application menu: First, update your system's package list by entering the following command: Nex...
How to Program a MicroBit using Thonny
Let's get set up with scripting in Thonny for the Micro:bit. We'll install Thonny, configure for Micro:bit, and write our first script. All you'll need to follow along is a Micro:bit v2 GO kit Contents Install Thonny Set u...
Makera Carvera Overview | The Most Approachable Industrial Desktop CNC Mill?
The Makera Carvera touts itself as a beginner-friendly CNC milling machine capable of carving through wood, plastic, brass, and aluminium, all while keeping a compact desktop footprint that still offers a highly capable 360 by 240 millimet...
Pimoroni Blinkt: Setup and first script
Not quite sure how to get started with your Pimoroni Blinkt module? Let's set one up and have a play around! We'll guide you through the installation, open up some examples and try our hand at writing a simple program. You'll need: A Ra...
Capacitive Touch Keyboard with CircuitPython: Adafruit Circuit Playground Express
On the lower left-hand portion of every Adafruit Circuit Playground Express, there is a small onboard speaker and class D amplifier. This allows you to make some pretty loud sounds! The amplifier is also connected to the true analog output ...
Overclocking Your Raspberry Pi
Part of the joy that is Raspberry Pi is getting stuck into it at a slightly lower level and finding out exactly what you can do with it if you take a look under the hood. One of the most popular experiments to do with your Raspber...
Getting Started on The Things Network
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keeping it here for posterity. Let us know on our forums if you need help getting started with the new method. Since you’ve got your new P...
DIY 10W Bluetooth Speaker - No Code Needed – How to use a Bluetooth 4.2 Audio Receiver Board with Onboard Amplifier (MH-M38)
Let's turn it up to 11! Today we are getting right into Bluetooth Audio Receivers in particular the MH-M38. The MH-M38 is a stereo audio receiver with loudspeaker outputs (and an inbuilt amplifier) that can play music from a smartphone/com...
How to Use Rotary Encoders
Hello and welcome to our tutorial on using rotary encoders. Today we’re going to be taking a look at what is a rotary encoder, how does it work, why we would use it over other sensory inputs and creating code to use them. Rotary encod...
Run Raspberry Pi x86 on your Windows Desktop Computer (Virtual Machine)
Running a virtual Raspberry Pi on your computer can be a neat way to experiment in a Raspbian-like environment without being tethered to a physical Pi. In this video, I'll walk you through the process of installing Raspberry Pi Desktop on a...
Temperature Sensing with Particle
If you’re looking for a platform to create your ideal data-logger, then look no further than Particle. Whether it be that you want to build a weather station, or a movement detection system, thanks to Particle’s 3G and Wi-Fi boa...
Optimising RetroPie
Hello and welcome to another tutorial on the joys of RetroPie. Today we’re going to look at making RetroPie even better. If you’ve had the chance to play around with the RetroPie system, you’ll have noticed that whilst it ...
Controlling a Solenoid with an Arduino
In this tutorial, we will look at the basics of Solenoids and how they work. Then we will design a small circuit that can drive a Solenoid from the input/output pins on your Arduino board. We covered a whole bunch of rotational motion co...
Relay Operation and the Arduino Uno
If you could operate your switch without physically toggling it on and off, you would open yourself up to an entire section of electronics. Relays are one of the best ways of doing this. A relay is essentially just a switch, controlled by a...
Potentiometers and the Arduino Uno
Variable resistors come in all shapes and sizes, and they all do the same basic job. They allow you precisely control voltage/current flow within a circuit. The most common type of variable resistor we see in DIY electronics is the Potentio...
How to network XBee and the Arduino
Want to setup a wireless XBee network between some Arduinos and your PC? We're going to show you how. We will be using Series 1 XBee modules alongside some XBee Explorer USB modules from Sparkfun to set up our own Personal Area Network (PAN...
How to Use Ultrasonic Sensors
ECHO…echo…echo…echo… We’ve all had fun shouting into a cave or large space and hearing our voice coming back to us at some point during our childhood. And if you’re like me, a fully grown adult who...
How To Choose The Right Resistor.
Resistors are the hardworking underdogs of the electrical circuit world. You have probably added a 4.7k or 330-ohm resistor into your circuit without thinking about why we use those values, let alone what the resistor is doing. We are going...
Put the Internet to Work with IFTTT & Particle
We’re in a golden age of connectivity, the internet we know today has given us the tools to connect anything to anything, and now with the platform brought to us by Particle, DIYers everywhere can connect the creations up to this va...
Infrared Sensing, Hardware Interrupts, and the Arduino
Infrared (IR) is a great way of using non-visible light to control electronics, and there are a bunch of modules that we can use with our Arduino. However, what do we mean when we are talking about infrared and electronics? Well, IR remotes...
How to use GPS with Arduino - Parse and Log NMEA Sentences
Now that we've investigated and explained how How GPS Receivers work we can apply that understanding to some real-world applications of of the ideas. To start, we can use any GPS receiver, an Arduino Uno and some male-to-female Jumper ...
Sound Reactive Lights with CircuitPython: Adafruit Circuit Playground Express
The Adafruit Circuit Playground Express comes equipped with an onboard microphone that is capable of sensing both amplitude and frequency. This tutorial will walk through a quick sketch using CircuitPython to turn the lights on the board in...
Working with the Particle IDE
In case you haven’t heard, the Internet of Things (IoT) is upon us. More and more devices everyday are being connected to the internet to communicate to people and other devices. Particle have seen the DIY/maker community’s desi...
DC Motor Control with an Arduino
Electronics is fun, so far we have covered off on communicating between devices, making LEDs flash and LCD screen operation. However using electricity to control some form of movement in your project is a fun and interesting aspect to inves...
USB Keyboard-Mouse with Teensy
Hey all! By now you should have heard about all the wonderful Teensy Boards produced by Paul Stoffregen and the PJRC team but, in case you haven't, they're a collection of high-speed, ARM-based microcontrollers that...
Basics: Writing Your First Script with Raspberry Pi
In this tutorial we'll be writing our first bash script for Raspberry Pi. We'll create a directory to keep this and future scripts, write the actual script, and set it up as something that can be executed from the shell. Scripts are an inc...
How To Control A Motor with the Raspberry Pi
In this tutorial, we are going to connect a Motor to the Raspberry Pi and create a hypnotic self-spinner. We are first going to look at how to wire the Raspberry Pi to the motor controller and the motor. We will then look at using the raspb...
What Are NeoPixel LEDs?
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that uses RGB LEDs and you want to avoid the rat's nest that ensures when using multiple RGB LEDs, each colour requiring its own connectio...
Graphic OLED Displays with Particle
Note that the digital artifacts on the screenare from the camera used to capture and not the screen itself How many great artworks or photos have you seen that consist of just lines of characters; words and numbers? Very few. It’s ...
Switches, Debouncing and the Arduino
When we boil it down, everyday interactions with electronics are usually limited to controlling stuff with switches. Whether it be turning on the lights, switching on your laptop or turning on the kettle, all examples of how a physical sw...
What Are DotStar LEDs (APA102/SK98225)?
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that uses RGB LEDs and you want to avoid the rat's nest that ensures when using multiple RGB LEDs, each colour requiring its own connection. Digital...
7 Colour E-Ink Display For Raspberry Pi | Inky Impression 5.7" (7 Colour ePaper/eInk HAT)
It has finally happened, they figured it out! The new frontier of Colour Electronic Paper is here and I'm very impressed. People have been demanding this ever since the first E-Paper readers hit the market in the noughties. That black and ...
PiicoDev Colour Sensor VEML6040 - Raspberry Pi Guide
Introduction Let's read colour data from a PiicoDev® Colour Sensor with a Raspberry Pi and create a colour sorting machine. This guide will cover connecting the hardware, downloading some example code and remixing it. To follow along,...
PiicoDev Ultrasonic Rangefinder | Getting Started Guide
Similar to how bats echo-locate and how submarines use sonar, the PiicoDev® Ultrasonic Rangefinder uses sound waves to measure the distance to an object. It sends out a high-pitched sound wave, which bounces off of the object and comes...
Never Have Filament Grinding Again - Ultimaker
Filament grinding is very unlikely to occur if your running an Ultimaker S5 3D Printer with Ultimaker materials or 3rd party supported materials. Filament grinding occurs when the knurled feeder gear slips against the filament instead of sm...
PiicoDev Servo Driver PCA9685 | Getting Started Guide
This guide will help you get started with a PiicoDev® Servo Driver module. We'll take a tour of the module and walk through some examples to drive common servos. Servo motors are integrated motors that contain their own power circuitr...
WS2812 / NeoPixel Addressable LEDs: Particle Quickstart Guide
This tutorial is aimed at getting some instant gratification from your WS2812 LEDs (trade name: NeoPixels). I'll briefly cover a bare-bones setup for the Particle Photon. If you've never used any Particle hardware before, learn how to get ...
4G and GPS HAT For Raspberry Pi - Waveshare SIM7600X
Love your Raspberry Pi but wish it had even more connectivity akin to your mobile phone. Then the Waveshare 4G HAT is the solution for you! HAT simply means Hardware attached On Top. With this installed on your Raspberry Pi Single Board Co...
How to Mill 3D Models on the Carvera | MakeraCAM Tutorial
In this guide, we will be taking our Makera Carvera skills one step further by carving out a 3D topographical map - a highly detailed physical model of any location you like. We will be taking a look at the theory behind different milling ...
How to Debug MicroPython Code
When you are working on microcontrollers it can be very difficult to know what your code is doing, with MicroPython we can use REPL (Read Evaluate Print Loop) to see the debug output and run python commands in real time. This tutorial ...
Getting Started with the Carvera | MakeraCAM Tutorial
In this guide, we will be learning how to use the Makera Carvera to mill an ice stamp tray - a heavy piece of metal that imprints decorative patterns into a block of ice. We will be taking a look at what stock materials to choose, how to s...
PiicoDev Connection Guide
In this article we'll show you how to connect your PiicoDev® modules to your favourite development platforms. Connection Guides Other Connection Methods Pinouts Connecting Many Modules PiicoDev Smart Modules Custom I2C Addres...
Getting started with your Onion Omega2/2+
In this tutorial we will learn how to set up the Onion Omega2/Omega2+ for the first time. You will require the following: Onion Omega2 or Omega2+ An Onion Omega2 Dock, such as: An Onion Omega2 dock, eg. Power Dock or Bre...
PiicoDev Ecosystem Compatibility
PiicoDev is the open-source and best-documented platform specifically designed with rapid prototyping and maker education in mind. As fellow community educators, we have infused PiicoDev with ideas to ensure that every home project, school...
Fix the Built-in Camera - Ultimaker
The built-in remote monitoring camera and the live feed it provides makes for a fantastic tool of the Ultimaker S5 and Ultimaker S3 3D printers. You can now keep tabs on your prints remotely, easing the pain of a long-distance relation...
Remote 3D Printing with OctoPi
Remote control of your 3D printer is a particularly appealing concept, especially if you've been forced into printing via USB in the past. Using your new 3D printer should be as simple as plugging it in, uploading some G-Code and pressing '...
Choosing a Soldering Iron
Hello, and welcome to our tutorial where we’ll be looking at two different types of soldering irons and which one is going to be best for your workshop. We’ll be specifically looking at soldering irons, not how to solder, so for...
Flash MicroPython Onto An ESP32
The ESP32 family of microcontrollers are incredibly powerful (2 Cores on a Microcontroller!) and when combined with the awesome writability of MicroPython can be used for all kinds of projects. The ESP32 generally does not come with MicroP...
"Hello World" with Raspberry Pi 3
Today we’re going to take a look at how to get started and setup that fancy Raspberry Pi you’ve just bought. If you’re still not sure exactly how the Raspberry Pi works, or what it can do, check out ‘What is a Ra...
Program a Micro:Bit in your Web Browser
In this article, we'll program a Micro:bit v2 using a web browser. We'll connect a Micro:bit to our computer, open python.microbit.org and begin coding our first script. Contents What You'll Need Connect your Micro:bit Open the Progr...
Ultimaker 2+ 3D Printer and Ultimaker 2 Extended+ 3D Printer - Overview, Setup and First Print
This will be an overview, initial setup and first print guide for the Ultimaker 2 and Ultimaker 2 Extended . Quick links for the contents of this guide is seen below. Printer Overview Printer Characteristics ...
More Exciting Features - Ultimaker Cura
Cura is constantly being improved upon and half the fun is keeping on top of all the new changes and new offerings it gives. For completely free software, they are doing an amazing job. Nailing the recipe for a 3D prints will let you get th...
How to Pair and Map 8Bitdo SF30 Pro Controller with RetroPie
8Bitdo have brought joy to many retro-gaming enthusiasts with their SF30 Pro Bluetooth controller. It’s a fantastic piece of gear, and one of our favourite controllers to use with a RetroPie setup. We’ve covered off on our thoug...
DFRobot 8.9 Inch 1920x1200 IPS Touch Display For Raspberry Pi - Set Up Guide
It is time for a high-quality, complete package, 1920x1200 (HD) display set up with a Raspberry Pi Single-Board Computer. In regards to touch screens with Raspberry Pi have looked at Tiny GPIO HAT LCD displays, medium-sized AMOLED maker di...
PiicoDev Magnetometer- Getting Started Guide
This guide will help you get started with a PiicoDev® Magnetometer - get it working as a compass, and read the magnetic field strength of a nearby magnet. This guide is for the current revision of the PiicoDev Magnetometer, feat...
Our littleBits Rule Your Room Kit Review
"Yes, I would recommend this a friend." That's the verdict of 90% of people who pick up the Rule your Room Kit from littleBits. We love it so much, we're most definitely recommending it to you and your family. But you don't need to take ...
Makerverse Real Time Clock with Supercapacitor Backup - Raspberry Pi Guide
Introduction This guide covers the configuration steps required to use the Makerverse Supercap Real Time Clock module as a backup RTC on a Raspberry Pi. This is required for remote applications when Internet access is impractical and accur...
How to set up YOLO Computer Vision on a Raspberry Pi | Conda & Ultralytics
In this guide, we will be learning how to install the Ultralytics YOLO Vision Package on a Raspberry Pi with Conda. This package is going to allow you to run nearly any YOLO model supported by Ultralytics, and we will also give you some de...
How to use a RTC With an Arduino UNO R3 to Create an Accurate Clock (LCD Screen and Nixie Tubes)
Today we're pulling out the breadboard, getting up and running with an RTC module then finishing up by making ourselves a clock that will keep the correct time even when we pull the plug. To achieve this we will be combining three main com...
How to Build Internet-Connected Electronics Projects
What do we mean when we talk about the "Internet of Things"? Mostly we're talking about tiny computers that have access to the internet and do some useful work. Unlike the computers we're used to holding in our hands, they don't have a touc...
PiicoDev Transceiver | Getting Started Guide
A radio transceiver is a device that can both transmit and receive radio signals, making it the perfect tool for communication on the go and remote projects! The PiicoDev Transceiver™ is a 915MHz radio that can send short messages up...
Makey Makey at Home
Have you heard of Makey Makey? If not, you’re about to have your mind blown! Makey Makey is an incredible way to bring imagination, creativity, and technology together. If you’re not sure what Makey Makey is, check out our Let's...
Getting Started With Relays | Examples with Raspberry Pi Pico
In this guide, we'll learn what a Relay is, why we might use one, how to choose a Relay, and finally how to use one with a Raspberry Pi Pico. To follow along you'll need: A 5V SPDT Relay - I'll be using a 5V Single Channel Relay M...
Getting Started with YOLO Pose Estimation Recognition on the Raspberry Pi
Have you ever wanted to dive into computer vision? How about on a low-power and portable piece of hardware like a Raspberry Pi? Well, in this guide we will be setting up some with OpenCV and the YOLO pose estimation model family on the Ra...
Updating 8Bitdo Controller Firmware
One of the great things about the 8Bitdo controllers is the fact that you can upgrade the firmware as new builds are released by 8Bitdo, allowing for future compatibility with various platforms. The process for updating the 8Bitdo controlle...
YOLO Object Detection on the Raspberry Pi AI Hat+ | How to Write Custom Python Code
In this guide, we will be exploring how to set up YOLO object detection with the Raspberry Pi AI HAT, and more importantly, learning how to apply this in your Python projects. We will be taking a look at how to install the required hardwar...
PiicoDev Distance Sensor VL53L1X - Raspberry Pi Pico Guide
Introduction This guide will help you read distance data in millimeters from your PiicoDev® Distance Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins soldered (pointing down) A Piico...
PiicoDev Ambient Light Sensor VEML6030 - Micro:bit Guide
Introduction This guide will help you read light intensity data from your PiicoDev Ambient Light Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit A PiicoDev Ambient Light Sensor VEML6030 A PiicoDev adapter for ...
Pycom WiPy Overview
The Internet of Things(IoT) and its devices have been utilised by ‘DIYers’ and ‘Makers’ to connect projects to the internet and take advantage of the worldwide network we have created. Some might say a sentence with ...
Raspberry Pi 4 vs Raspberry Pi 3 Plus (Model B)
The Raspberry Pi 4 Model B is finally here! This is a huge leap forward for single-board computing and what better way to explore it than power one up, run some tests and stress it out! Here are the test results for those peopl...
PiicoDev Magnetometer QMC6310 - Guide for Raspberry Pi Pico
This guide is for the previous revision of the PiicoDev Magnetometer QMC6310 - if you have the latest revision featuring the MMC5603 - head to the guide for updated links and instructions.Let's get started with the PiicoDev® Magnetome...
Face Recognition With Raspberry Pi and OpenCV
In this guide, we are going to be teaching you how to set up your Rasberry Pi to detect and recognise faces using OpenCV and the Facial-Recognition library, two fantastic open-source projects. In this set up all of the data and processing ...
PiicoDev Ambient Light Sensor VEML6030 - Raspberry Pi Pico Guide
Introduction This guide will help you read light intensity data from your PiicoDev® Ambient Light Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins soldered (pointing down) A PiicoDev...
PiicoDev Pressure Sensor MS5637 - Raspberry Pi Pico Guide
Introduction This guide will help you read barometric pressure from your PiicoDev® Pressure Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins soldered (pointing down) A PiicoDev Press...
PiicoDev Pressure Sensor MS5637 - Micro:bit Guide
Introduction This guide will help you read barometric pressure from your PiicoDev® Pressure Sensor and a Micro:bit To follow along, it's best to have: A Micro:bit V2 A PiicoDev Pressure Sensor MS5637 A PiicoDev Adapter for M...
Getting Started with the Raspberry Pi 3A+
There is a new board in the Raspberry Pi family! In this Tutorial, we will walk you through the steps to set up your new Raspberry Pi 3 Model A+.To setup your Raspberry Pi 3A+ you will need: A Raspberry Pi 3A+ A Preloaded NOOBS SD Card...
Setting up your OctoPi Kit
So you have just received your OctoPi kit and you are looking to get it up and running. All you need to do is grab out all the parts you received and around 20 minutes of time. To connect your OctoPi to the network you need to decide what ...
Fritzing for Schematic and PCB Design
Fritzing is a completely free Circuit Design program available across all popular operating systems. The program was designed to support hobbyists, hackers, artists and makers (and all creative minds) in taking the step from concept to prot...
Getting Started with Particle Internet Button
Slowly but surely the electronics industry is moving away from discrete microcontrollers and towards boards that have sensors and extra functionality built in. This means that rather than buying a microcontroller and then needing to connect...
Power Supplies for your Project
Ever had the issue where you have dozens of old phone chargers and appliance plug packs piled up in a rats nest of AC-to-DC mayhem? We tend to breeze right past these square, black power supplies, not knowing what's happening under the hood...
Getting Started with Particle Photon
When you first look at the Photon, it’s staggering that such a small device could possess the incredible functionality that it does, but not only does it bring an impress spec sheet to the table, but the true power is unlocked in the ...
YOLO Pose Estimation on the Raspberry Pi AI Hat+ | Writing Custom Python Code
In this guide, we will be setting up and using YOLO pose estimation with the Raspberry Pi AI HAT, as well as exploring how to use it alongside your own Python code so you can use pose estimation in your projects. We will be taking a look a...
How to Build a RetroPie Console
Perhaps you’ve read our Gaming Kit for RetroPie tutorial on how to setup a RetroPie console and wondered what’s required to actually build one, or heard about it and not been sure what you need. Well, today is your lucky day bec...
Raspberry Pi 3 Model B+ Performance vs Raspberry Pi 3 Model B
The Raspberry Pi 3 Model B+ (I’ll be calling it the Pi 3+ for short) is an update to the existing Raspberry Pi 3 Model B and was released on Wednesday 14th March 2018. It has some very interesting changes: The Broadcom BCM2837 has ...
Using Teensy with Arduino IDE
If you’ve come looking for how to get your Teensy board up and running using the Arduino IDE, then you’ve come to the right place. Whilst you can use the standard Teensy loader application to flash compiled code directly to yo...
Tips for Installing your Lulzbot TAZ 6 Enclosure
With winter currently in full swing, there's a particularly annoying 3D printing problem that is rearing its ugly head, Warping. For those who don't know, warping is what happens when parts of a printed model shrink due to cold drafts acros...
PiicoDev Motion Sensor MPU-6050 - Raspberry Pi Pico Guide
Introduction This guide will help you read motion data from your PiicoDev® Motion Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins soldered (pointing down) A PiicoDev Motion Sensor M...
PiicoDev Motion Sensor MPU-6050 - Micro:bit Guide
Introduction This guide will help you read motion data from your PiicoDev® Motion Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit v2 A PiicoDev Motion Sensor MPU-6050 A PiicoDev adapter for Micro:bit ...
PiicoDev Buzzer Module - Guide for Raspberry Pi Pico
Introduction Let's play tones and melodies on a PiicoDev® Buzzer Module with a Raspberry Pi Pico. This guide will cover connecting the hardware, running an example to make sure everything works, and playing simple melodies. To follow ...
PiicoDev Buzzer Module - Guide for Micro:bit
Introduction Let's play tones and melodies on a PiicoDev® Buzzer Module with a Micro:bit. This guide will cover connecting the hardware, running an example to make sure everything works and playing simple melodies. Of course, the Micr...
Micro:bit Temperature and Humidity Sensing
The Micro:bit has the ability to measure temperature by sensing the temperature of the silicon die inside the main CPU. This works because the Micro:bit runs cold, and the temperature of the CPU is usually a good approximation of ...
PiicoDev Precision Temperature Sensor TMP117 - Micro:bit Guide
Introduction This guide will help you read temperature data from your PiicoDev Precision Temperature Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit A PiicoDev Precision Temperature Sensor TMP117 A PiicoDev a...
3D Printed Case For Raspberry Pi Pico and PiicoDev Boards
Let me introduce a new 3D printable case for the Raspberry Pi Pico and the PiicoDev ecosystem. There are variants of the case, one which allows you to wall-mount the system and another variation that makes it possible to charge the dev...
PiicoDev Precision Temperature Sensor TMP117 - Raspberry Pi Pico Guide
Introduction This guide will help you read temperature data from your PiicoDev® Precision Temperature Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins sol...
PiicoDev Atmospheric Sensor BME280 - Micro:bit Guide
Introduction This guide will help you read weather data (Temperature, Air Pressure and Humidity) from your PiicoDev Atmospheric Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit v2 (v1 does not...
Custom Object Detection Models Without Training | YOLOE & Raspberry Pi
In this guide, we will be exploring YOLOE, a computer vision model that allows you to create custom object detection models through prompts - no training processes required! We are going to be learning how this vision model works and how t...
8Bitdo Zero Controller Review
It’s always a fun day when you get hands-on with a device as cool as the 8Bitdo Zero Bluetooth gamepad. 8Bitdo are known are for their re-creations of classic gaming controllers such as the SFC30 and NES30 which bring the magic of NES...
Our Lulzbot Taz 6 Review
Lulzbot is constantly building upon their printer's design, incorporating the best modifications and add-ons from the community into their newer models. In May 2016, their newest addition to the TAZ line of printers, the TAZ 6 wa...
How to set up a PiHole on a Raspberry Pi - Block All Ads and More!
Time to create a Little Red Advertisement Devouring Monster. This will be a self-hosted, network-wide, ad-blocking system running on a Raspberry Pi Single Board Computer. It will also stop access to malware sites and phishing websites. Fur...
PiicoDev Atmospheric Sensor BME280 - Raspberry Pi Pico Guide
Introduction This guide will help you read atmospheric data from your PiicoDev® Atmospheric Sensor and a Raspberry Pi Pico To follow along, it's best to have: A Raspberry Pi Pico with pins soldered (pointing do...
Your First Print with a Lulzbot 3D Printer
Once you receive and unbox your Lulzbot machine you might be so eager to print things, you skip a few steps in the setup process and all of a sudden you are having all sorts of difficulties that you can’t understand. It happens, what ...
Getting Started with YOLO Object and Animal Recognition on the Raspberry Pi
Have you ever wanted to dive into computer vision? How about on a low-power and portable piece of hardware like a Raspberry Pi? Well, in this guide we will be setting up some with the YOLO vision model family, OpenCV and the COCO object l...
How to Use DC Regulators/Converters
So, you might have the best project in the world, an amazing idea and design, but no matter how clever your circuitry or how advanced your prototype is, unless you can power your project correctly, it all counts for nothing. Often you will ...
What is a Kano Computer?
How many young people are able to assemble a computer, from scratch? Sure, adults can do it. There are even IT professionals and avid PC enthusiasts that take it to the next level; customizing everything down to the color of the Power LED a...
Cura 2 LulzBot Edition: Installing or Upgrading
In November of 2017, our friends over at LulzBot released a major software update to their Slicing software, Cura. In this tutorial, we will look at what Cura is and does, the process of installing Cura 2 onto a PC already running Cura 21.x...
Our Raspberry Pi Compute Module 3 Review
A new day is upon us, and it is glorious. After all, it’s not often that a new Raspberry Pi board is released. As you’re probably aware, the current iteration of the popular Raspberry Pi microcomputer is the Raspberry Pi 3. It h...
3D Printable Charging Docks For 8BitDo Controllers
No gamer cave is complete without a retro gaming console and 8Bitdo Controllers are the best retro-gaming controllers you can buy. These controllers are simply that good. But there is nothing worse than rushing downstairs eager to play...
Arduino Projects with Robotics Using the Sparkfun RedBoard
Welcome to the final Project Set of the Sparkfun Inventors Kit! This Project Set focuses on Robotics with the final Circuit being an Autonomously Driving Vehicle! New components introduced in this tutorial are: DC Motor/Gearbox Mo...
Getting Started with Raspberry Pi Pico
This guide is a little outdated: Follow our updated guide for a much simpler way to get started! Contents Part 1 - Interacting Coding with the REPL Part 2 - Moving Beyond the REPL (with rshell) Part 1 - Interactive Coding with the...
PiicoDev Magnetometer QMC6310 - Guide for MicroBit
This guide is for the previous revision of the PiicoDev Magnetometer QMC6310 - if you have the latest revision featuring the MMC5603 - head to the guide for updated links and instructions.Let's get started with the PiicoDev® Magnetomet...
Getting Started with Saleae: Tips and Tricks
Well hello there, if you’ve been looking at the amazing line-up of Saleae gear and wondered how to get started with it all, then you’ve come to the right place. Today we’re going to take a look at getting your Saleae setup...
PiicoDev Capacitive Touch Sensor CAP1203 - Micro:bit Guide
Let's get started with the PiicoDev® Capacitive Touch Sensor. In this guide, we'll connect the PiicoDev Capacitive Touch Sensor to our Micro:bit V2 and get it working with some example code to detect touch events. We'll also remix the c...
GlowBit Orb Snowflake & Bauble Kit - Pico Getting Started Guide
In this guide, we will be looking at how to set up the Glowbit Orb Snowflake and Bauble Kits. We will be looking at how to get going with the default code they ship with, breaking down how the code works, and learning how to modify it to m...
Sphero SPRK+ Review
If you’re in the education sector or keep up to date with the latest STEM learning tools, then you’ve most likely heard of Sphero. It’s one of the most popular educational products which fuses robotics with imagination and...
Pycom Pysense & Pytrack: How to Update Firmware
UPDATE: This documentation now also applies to Pyscan and Expansion Board 3.0 Pysense and Pytrack boards have a “firmware update mode”. Unlike the Pycom microcontrollers you don’t add a jumper to the board to acces...
PiicoDev Colour Sensor VEML6040 - Raspberry Pi Pico Guide
Introduction Let's read colour data from a PiicoDev® Colour Sensor with a Raspberry Pi Pico, and create a colour sorting machine. This guide will cover connecting the hardware, downloading some example code and remixing it. ...
PiicoDev Colour Sensor VEML6040 - Micro:bit Guide
Introduction Let's read colour data from a PiicoDev® Colour Sensor with a Micro:bit V2, and create a colour sorting machine. This guide will cover connecting the hardware, downloading some example code and remixing it. To f...
PiicoDev RFID Module - Guide for micro:bit
Radio Frequency IDentification (RFID) uses electromagnetic fields to identify and communicate with tags. Each RFID module emits radio waves that energise the passive tag, which then responds with its own identifying number or data, as reque...
GlowBit Matrix 8x8 - Python and MicroPython Guide
Introduction This guide will cover the basic functionality of the GlowBit Python library when driving a GlowBit Matrix 8x8 module. To follow along, it's best to have: A GlowBit Matrix 8x8 A Raspberry Pi Pico ...
Our Review of the MOARstruder by Lulzbot
Toolheads for your 3D printer come in all shapes and sizes. The different models available from Lulzbot are all designed with a specific purpose in mind, usually to add a filament type to your 3D printing repertoire. Dual extruders enable y...
How to Build Your Ultimate RetroPie Gaming Console
Amid all the new controllers that 8Bitdo have brought out and the mountain of Raspberry Pi cases and accessories that are available, we’ve bundled everything together to create the ultimate RetroPie gaming console. If you’ve bee...
Pycom GPy & FiPy Cellular LTE Firmware Update
There are three levels of firmware upgrades that are required on Pycom gear. First, performing an upgrade on the firmware of any of the Pycom microcontrollers is a simple affair. Download the Pycom Firmware Update application as linked in t...
PiicoDev Capacitive Touch Sensor CAP1203 - Raspberry Pi Pico Guide
Let's get started with the PiicoDev ® Capacitive Touch Sensor. In this guide, we'll connect the PiicoDev Capacitive Touch Sensor to our Raspberry Pi Pico and get it working with some example code to detect touch events. We'll also rem...
All About LEDs
Hello and welcome to our tutorial where we a look at all things LED. Now first of all, what is an LED? LED stands for Light Emitting Diode and is an electronic component used to convert electrical energy to light energy. This process is cal...
Micro:bit Light and UV Sensing
Every Micro:bit has the ability to measure visible light, but what about UV light? Imagine that you are growing a plant on the window sill in a well-lit room. Does your plant have enough light? Plants need UV light to photosynthesize e...
Setting Up Hyperbian – Ambient Lighting with your Screen
Break your television and monitors free from the confines of their edges with Hyperbian! This is an open-source ambient light software that will improve the way you enjoy your favourite media. Hyperion for the Raspberry Pi ∴ Hy...
5 Things You Can Do With The Raspberry Pi 500+
The Pi 500+ is here, and we see a lot of people wondering what the Pi hundred series is, what its uses are, and what role it can fill. That’s why today we are looking at 5 things you can do with a Raspberry Pi 500+. This guide will ...
PiicoDev Magnetometer QMC6310 - Guide for Raspberry Pi
This guide is for the previous revision of the PiicoDev Magnetometer QMC6310 - if you have the latest revision featuring the MMC5603 - head to the guide for updated links and instructions.Let's get started with the PiicoDev® Magnetomet...
How to make a Raspberry Pi NAS - A NAS-Berry that Runs Open Media Vault
Welcome to the best article on setting up an OpenMediaVault-based NAS on a Raspberry Pi Single Board Computer! This guide is the fastest and best way to go about it. Raspberry Pi single-board computers are purpose-built to run 24/7, with a...
How to add mmWave Radar to a Pico | Detect and Track Humans
In this guide, we will be learning how to use the RD-03D radar sensor with a Raspberry Pi Pico so you can detect and track humans in your next project. We will be looking at how it operates and what you will get out of it, how to con...
Micro:bit Soil Moisture Sensor
The Micro:bit is great for small portable projects like a soil moisture sensor. In this tutorial, we will walk through how to program a Micro:bit to make a reliable and consistent soil moisture sensor that will give consistent readings. The...
Arduino Boards, Compared
We're going to compare each of the Arduino Boards available to Maker's and Electronics Enthusiats. We'll discuss the features of each board, provide an informative pinout diagram with tonnes of detail, and toward the end of the article, pro...
PiicoDev OLED Module SSD1306 - Micro:bit Guide
Let's get started with the PiicoDev® OLED Module SSD1306. In this guide, we'll connect the PiicoDev OLED to our Raspberry Pi Pico and get it working with some example code to display text, shapes, and animations. To f...
Setting Up Your xTool P3 | From Unboxing to First Cut
In this guide, we will be setting up the xTool P3, a powerful CO2 laser cutter that tries to bring industrial level features to a desktop format and price tag, and we are going to walk through the entire assembly process, from putting toge...
How to add GPS to Your Arduino | Add Real-Time Location to Your Project!
In this guide, we will be learning how to use a GPS module with an Arduino and C++. We will be looking at; how GPS works, how to wire up and code an Arduino to use the GPS module, and as a final step we will be putting it all together in a...
Getting Started with Moondream on the Pi 5 | Human-Like Computer Vision
In this guide, we will be exploring Moondream, a computer vision model that analyses images and applies human reasoning to them, allowing you to ask questions about the image in natural human language. We are going to be learning what Moon...
Lightning Sensor with a Raspberry Pi Single Board Computer - 40 KM RADIUS RANGE!
What if I told you that you could have the power to detect a lightning strike from 40km away? You'd probably think I've gone mad watching too many Marvel movies. But it is true! All thanks to the DFRobot Gravity: Lightning Sensor. Accessib...
GlowBit™ rainbow Quickstart Guide for micro:bit
Let's do some creative projects to get familiar with the GlowBit™ rainbow and micro:bit. The animation runs for 10 seconds, and can be started by pressing either of the micro:bit's buttons In this guide we will: Wi...
PiicoDev OLED Module SSD1306 - Raspberry Pi Pico Guide
Let's get started with the PiicoDev® OLED Module SSD1306. In this guide, we'll connect the PiicoDev OLED to our Raspberry Pi Pico and get it working with some example code to display text, shapes, and animations. To ...
PiicoDev RFID Module - Guide for Raspberry Pi Pico
Radio Frequency IDentification (RFID) uses electromagnetic fields to identify and communicate with tags. Each RFID module emits radio waves that energise the passive tag, which then responds with its own identifying number or data, as reque...
Getting Started With Ultra-Wideband & Measuring Distances| Arduino & Pico Guide
In this guide, we will be exploring ultra-wideband modules and how you can use them to add robust distance measurements to your next maker project. We'll be learning how these incredible little boards work, what you can expect from them, a...
Use a ESP32-CAM Module to Stream HD Video Over Local Network
Cameras in combination with artificial intelligence create arguably the most powerful sensor you can ever put on a microcontroller. So that’s exactly what we will do here with an ESP32-CAM Development Board that sports an inbuilt 2MB...
Fingerprint Scanner with Raspberry Pi Single Board Computer - Unlock with Biometrics!
Let's unlock Biometric Control on our Raspberry Pi Single Board Computers! Biometric Technology uses unique physical or behavioral attributes that are individual to each person and not (easily) replicable. Extraordinarily everyone on Earth...
WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266
Today will be all about controlling Fully Addressable LED Lights using any Espressif ESP32 Development Board and your mobile Phone all through WIFI! All possible by WLED. There are many ways to use your mobile phone to remotely...
Using mmWave Radar to Detect and Track Humans | Raspberry Pi Guide
In this guide, we will be learning how to add the RD-03D radar sensor to your Raspberry Pi single-board computer so you can detect and track humans in real time. We will be looking at how the sensor works and what you can expect from it, h...
Detect and Track Humans with mmWave Radar on an Arduino
In this guide, we are going to be learning how to use the Rd-03D radar sensor to detect and track humans in your next Arduino project. We will be looking at how it works and what you can expect from it, how to wire up and code your Arduino...
Getting Started With EMG Muscle Sensors | Measure Muscle Flexing!
In this guide, we’re going to be exploring muscle sensors, also known as Electromyography (EMG) sensors, and learning how to use them to measure muscle movement in maker projects. These clever little modules can pick up the tiny volt...
Getting Started with Servos | Examples with Raspberry Pi Pico
In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and finally how to use one with a Raspberry Pi Pico. To follow along you'll need: A Positional Servo, such as the Feetech FS90 Micro Servo A Con...
Raspberry Pi Pico Workshop for Beginners
Welcome to the Raspberry Pi Pico Workshop, where you will learn everything you need to know to hit the ground running and start making your own projects with the Raspberry Pi Pico and MicroPython. This workshop is designed for complete beg...
Meshtastic for Makers Workshop
Welcome to the Meshtastic for Makers Workshop, a short course that teaches you everything you need to know about Meshtastic so you can go out and start wirelessly sending information in your projects with the Meshtastic network. This works...
Simple e-ink dashboard
The aim of my project was to make a small display to show information such as the clock, weather, calendar, etc. I liked the idea of making a magic mirror, but wanted to try something more unique, less expensive, and easier to assemble (no ...
Sound Effects Button
The idea for this project came when a friend of mine flew over from Western Australia to visit, and during his stopover in Adelaide, he did what any adult would do; visit the airport novelty store and buy some random stuff. It was pretty mu...
Ping Pong Launcher
I like to take on projects that give me an opportunity to learn new things. For this project, my two goals were to learn more about face detection algorithms and PID controllers but of course, there were so many more skills learned along th...
Raspberry Pi Microscope
The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mount components. Its main function is to verify the quality of solder joints and ensure there aren’t any short circuits. With the addition of...
Smart Home Makeover with HomeAssistant
IntroductionI wanted to bring ageing, and failing, Home Automation infrastructure into the modern age whilst retaining hardware investments already made. Our house had Universal Power Bus (UPB) dimmers and switches installed at build time...
IoT House
These days we can do just about anything on our phone, we can control so many aspects of our lives using the technology in our pocket, but the most mundane aspects of our lives; opening the garage door, blindly reaching for the light switch...
Wefted Waveforms
This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro-sculpture.
The freestanding structure is formed from wire mesh and papier mache. It is then painted and wired ...
This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro-sculpture.
The freestanding structure is formed from wire mesh and papier mache. It is then painted and wired ...
mintyPi
This is an awesome project that takes about 6 hours to complete. Hours upon hours of endless fun thereafter! Ideally, some prior soldering experience is advantageous but if you take your time and practice before you start it's beginner fri...
Time lapsing in OctoPrint (Properly!)
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosure, I'm just about ready to turn on some serious 3D printing work. But before I dive into that endless pool of fun, it's a good time to take ...
Smart Mirror with Raspberry Pi
I had first seen smart mirrors online several years ago and have been meaning to create one ever since, my requirements were to be able to see the time, weather, calendar and news. The great thing about it is the unlimited possibility for c...
A Back to the Future Clock
This project started life as an alarm clock for my son made to look like the time circuit from the Back to the Future movies. The display can show the time in various formats, including the one from the movies of course. It's configurable v...
Raspberry Pi Cyberdeck (SDR Edition)
I’ve always wanted a compact, rugged, and portable computer that can withstand any environment thrown at it. I’m a huge fan of Raspberry Pi computers and stumbled across Jay Doscher’s awesome designs for fitting Raspberry Pis in Pelican ca...
IoT Chicken Shed (Arduino, Wifi)
If you have chickens and find you're not always available to close the gate at night or check the water levels each day, then why not use an ESP8266 to automate your chicken door and receive alerts door status and low water level, as well a...
Hydra Bluetooth Speaker
Wow - this is one monstrous sounding and great looking speaker - even if I do say so myself! This is basically a 2.1 (stereo + subwoofer) system made with 3D plastic parts. Both the full range and subwoofer speakers are based on closed (se...
Electronica Botanica
This piece combines recycled electronics extracted from decommissioned computers and new electronic components. I had an idea I wanted to incorporate a lighting element into a contemporary sculpture so it was just a matter of coming up with...
Portable Arcade Emulator
Introduction
I am a Mechanical Engineer, and after 30 years in industry I now teach Engineering at High School. I create various projects in my spare time and bring them to school to inspir...
Math Scroller
I was looking for something educational to 3D-Print for my child in Thingiverse and came across the concept of the Math Spinner. I found the models lacked a method of checking the answer so I wanted to automate it. The core design is inspir...
DIY Pi Buggy
The motivation behind this project came from a robotics and engineering club that I've been going to. I've been saving my money and building up an understanding of raspberry pi and electronics. The reason I chose this project was to get use...
Tweeting Pi-Zero-W GIF Camera
I made a Raspberry Pi camera that captures GIF files and optionally tweets them over WiFi! It's built around a Raspberry Pi Zero W and a Pi Camera module. The camera connects to a pre-programmed WiFi network to tweet the gifs, but...
Autozem
Introduction So now everything is available in this day and age, and all those childhood dreams can now come true as parts, technology and software has come a long way. I had recently taken up the hobby, RC planes. Eventually I learnt ho...
ESP32 IR-Triggered Camera with Home Assistant Integration
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
Stream Airplay to Your Pi Zero
The Raspberry Pi Zero W is a tiny, yet powerful little device. Coupled with a Pimoroni Speaker pHat, it can be easily turned into a portable Airplay speaker which allows you to stream your music anywhere you want.Parts you'll need: Raspb...
DIY Gameboy based on Raspberry Pi Zero W (PiGRRL)
We made a Pi Zero W retro-games console! The nostalgia is making me dizzy! If you'd like to build your own, we've put together a couple of wishlists to make things easier: For the Pi Zero W build, like in this project, check out the PiG...
Kid’s Music Box
I want to make a portable music box that my 2 year old kid can operate intuitively on her own. So, Spotify or any other on-demand music platform with tablets and Bluetooth speakers are out of the question. Remember the good old days of putt...
Pi Zero Motion Sensing Camera
The Pi Zero Motion Sensing Camera is a portable security camera using a Pi Zero 2W, Pi Zero camera, Battery Pack, and Case. I started this to have a taskable security camera with motion capture & notifications. I had some spare P...
IoT Pet Feeder
The objective of this project was to create an Internet of Things (IoT) device that could give pet access to a food bowl when a text message command was sent from a remote location. I had never done an IoT project before, so I wanted to ke...
YAM: Monitoring Animal Enclosures
YAM (or YetAnotherMonitor) I keep more than 20 enclosures of Australian native lizards and turtles and I want to make sure they are all in an appropriate environment. To that end, I built a microcontroller-based system to monitor the tempe...
BuzzBox
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the PiicoDev Buzzer modules let you stack up multiple tones into a song. Find your MIDI, export it through a script, upload it and get grovin'! ...
The Skeg Flexer - A Surfboard Fin Test Jig
This project started because I was laid up, unable to surf. It was something I’d been wanting to do for a long time - I wanted to see if I could get a deeper understanding of my surfboard fin collection and why some ‘feel’ better than othe...
Raspberry Pi 3 B+ Media Center
How-to guides are very useful, but while “do this, then do that” is great to reproduce exactly what is in the guide, it’s less helpful if you want or need to modify the project. This is especially true with technology proj...
Creating our own Raspberry Pi 3 Case
We've got a whole bunch of Raspberry Pi 3 Cases here at Core Electronics. From the Official Enclosure that's perfect for most uses, right through to the gilded PiBow Coupe from Pimoroni. All of the cases we see have one or two impressive fe...
Infinity-Mirror Table
An infinity mirror creates a striking optical illusion - a tunnel of light that seems to tear through space. I built this infinity-mirror table using some addressable LEDs, a Particle Photon and easily obtainable timber supplies. Check out...
WhyzaGC - Feather ESP32 addon to the MightyOhm Gieger Counter
This project is about adding a wireless Adafruit Feather HUZZAH ESP8266 or ESP32 v2 with Adafruit Featherwing 128x64 OLED to interface with the self-assembled MightyOhm Geiger Kit.
Introduction
I am always on ...Introduction
I am always on ...
Raspberry Pi Game Show
Introduction
I made this project because I had been given a Raspberry Pi 4 for Christmas and was hoping to make a fun project with it. I wanted to make something which wasn’t just copying a tutorial and was a...Introduction
I made this project because I had been given a Raspberry Pi 4 for Christmas and was hoping to make a fun project with it. I wanted to make something which wasn’t just copying a tutorial and was a...
Nintendo Wii Portable | Project G-Wii
Do you love your Wii and its ability to play all GameCube games perfectly but wish you could take it on the go like a Gameboy?
Well, I definitely did and if you're like me so do you. And here is the right place...
Do you love your Wii and its ability to play all GameCube games perfectly but wish you could take it on the go like a Gameboy?
Well, I definitely did and if you're like me so do you. And here is the right place...
IOT Shed Part 2
If you haven't already seen it, check out part 1 of this project. it has all the background info in it. And if you haven't got one yet, get yourself a particle photon, they are great. This part of the project was hooking the particle photon...
Desktop Infinity Mirror (Lasercut!)
A smaller version of our amazing Infinity-Mirror Table - the Desktop Infinity Mirror compresses all the colourful goodness into a picture frame-sized display. The entire design is made from laser-cut acrylic that we cut in-house. Check out ...
Raspberry pi Photo Booth
This project is a raspberry pi powered photo both. It uses a raspberry pi zero and the raspberry pi camera. All the code has been uploaded to GitHub for you. It has a ten-second timer, from when you press the button, and then it takes ...
Mass SD card Image Writer
We've built a mass SD card writer using a Raspberry Pi 3 Model B, some USB hubs and SD card readers. This beast has enough ports to write 49 SD cards at once! At Core Electronics, sometimes logistics hang-ups mean that suppliers cannot mee...
Arduino Tide Gauge
I used an Arduino and a US-100 ultrasonic sensor to make an extremely low-cost tide gauge. This project measures the tide by sensing the distance to water using a US-100 ultrasonic sensor. The device has a 3D printed base&nb...
Basic Weather Station
The aim of this project was to provide a cost effective and basic weather station for my backyard that can upload readings to Weather Underground. Part 2 of the project will be using this local data to trigger activities in and around my ho...
GlowBit Desktop Audio-Visualiser
Introduction
I’ve had this little 8x8 Glowbit matrix for a few weeks now, and for whatever reason, the first thing I thought after running the example programs was “This needs to be synchro...
Bill of Materials
AWS Lambda with Temperature data and the ESP32
In this project, I'm using an esp32 board combined with a thermistor, plus an Amazon Web Services Lambda API plus some web charting code for temperature sensing. Source code can be found in the GitHub repository: https://github.com/Acr...
GraviTrack Enhancements - Lights and Sound
Introduction Searching for solar panels and related items on the Core Electronics website; I came across the Solarbotics GraviTrack Marble Machine Kit. I thought the kit would be a good educational tool for the grandkids. The kit was a hit...
Rooberry Pi
In the area I live, there are often kangaroos that jump in front of traffic, often from blind spots, and can get themselves into harm's way. I wanted to build a low-cost solution that can alert drivers to kangaroos in these blind spots to r...
Circadian Lighting
After experimenting with automatic blue light filters on my electronic devices I wanted to replicate the idea with the lighting around the house so that it would gradually transition...
After experimenting with automatic blue light filters on my electronic devices I wanted to replicate the idea with the lighting around the house so that it would gradually transition...
Particle Photon Weather Sensor
Recently I finished my first Particle Photon project. It’s basically a temperature, humidity, and barometric pressure monitor all in one! I’m not a programmer, but I know enough to tweak code when necessary. I have, on...
Robot Arm Upgrade Project
This project has been a long and tricky one for me, I purchased my robot arm kit from Jaycar many years ago with the intention of controlling it from the start. I used to work with industrial robots, so when I saw this robot kit for sale I...
IoT Mailbox
Getting letters and parcels is awesome, what’s not so awesome though is when you miss the postman and you don’t know if that important bit of mail arrived or not. Such a frustrating, yet mundane problem can be solved by creating...
Hyperweb: Interactive Art for Vivid Sydney
Hyperweb is a collaborative interactive sculpture installation at Vivid in Sydney. I designed and built a crowd sensing weather station that is used to control an audio "soundscape" within the piece. It also triggers light show events that ...
555 Timer Step Sequencer Synthesiser
If you, like me, have been inhaling so much flux that the bronchioles of your lungs have mutated to convert the zinc chloride into electrolytes supplementing your chronic dehydration, then you will feel a persistent craving for analogue lo...
Rain Gauge Data Logger
Summary A Raspberry Pi 3B is used to collect digital counts from an electronic rain gauge (1mm of rain per reed switch closure by magnetic see-saw). It has been running without issues for over 12 months. A UPS powers the Pi so it is immune...
Wifi Sniffer
This project started because I wanted to know the signal strength of the Wifi in various places around my house. I had set up a Pi Zero as a simple watering system controller. It would switch a solenoid on and off based on a 7 day schedule;...
Micro:bit based GlowBit Car
I made this car because at school there was a Lego We-Do tug-of-war competition but the cars only drove backward and I wanted to make a car that can turn and drive forwards. If you make this car don't throw away the chassis box because I ...
Concrete Lamp
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1st and 2nd halves are cast in 2 steps using the same mould twice. I had a few failed attempts at making the mould entirely from sta...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1st and 2nd halves are cast in 2 steps using the same mould twice. I had a few failed attempts at making the mould entirely from sta...
Playing Synthesizers with a Teensy Controlled Game on a LaunchPad
I am an amateur musician, coder, and electronics maker. When I found out that the Novation Launchpad (mine is a mini MK3) can be programmed, I was excited about creating unique music. The idea is to use the Launchpad to play a game and use ...
grinder_timer
Making a dumb coffee grinder slightly less dumb. This is a programmable timer tethered to a Rancilio Rocky coffee grinder. The Rocky is a "dumb" grinder and electrically very simple. Basically it's an ac motor with an on/off switch and a m...
Solar Charging Station
The aim of this project was to use the sun to charge some batteries with 1W and 2W Seeed solar panels. The DFRobot Solar LiPo Charger and a Sunflower Solar Power Manager were purchased. Initially, this was unsuccessful because I did no...
Environment Monitor - V2
This project started due to the smoke haze that enveloped our area during the 2019 and 2020 bushfires. I wanted something to check the air quality of my home and maybe find areas where it needed better sealing. In addition, the BMP280 senso...
Mini Desk Vacuum
Chances are if you are anything like me, being a maker is often an excuse to create as big of a mess as possible during the duration of a project. And after the project is finished? You are left with an enormous mess to clean up, taking awa...
Possumpi
My partner wanted to assist with additional space for possums to live in as trees are being lost in the neighbourhood causing possums to move into unwanted areas. She asked me if there was any way to see if the possums were using the box we...
Raspberry Pi OSMC - Custom Media Center
I wanted to upgrade my media center (RPi B+ with Xbian) to something a bit nicer, more stable and more accessible than just the RPi in a basic plastic case.
I built an enclosure out of wood with aluminum front and rear panels.
I built an enclosure out of wood with aluminum front and rear panels.
FM Radio with Arduino, LCD and Si4703
A couple of years ago, I found a modern jukebox (with iPod connectivity, AM/FM radio, CD player and LEDs) dumped in my street. The body was in decent condition but all of the electronics were ruined apart from the LEDs. I decided to take it...
RGB Light-Up Remote-Control Car
SummaryI made this car and the previous one because at school there was a Lego We-Do tug-of-war competition a few years ago, but the cars only drove backwards and I wanted to make a car that can turn and drive forwards. The new version can...
RPi Cluster - SETI@Home
I was interested in creating a RPi Cluster to learn about how they work. After getting the clusterhat and Pi Zero Ws I set about creating the images for 5 sd cards. This seemed a waste so I scrapped that idea and setup the image for one sd ...
DIY Weather Station with Raspberry Pi
I wanted to build a weather station. After some googling I found a great ‘how to’ guide using a raspberry pi.
I was also interested in learning Python, so I decided to dive right in...
I wanted to build a weather station. After some googling I found a great ‘how to’ guide using a raspberry pi.
I was also interested in learning Python, so I decided to dive right in...
Modify Dell multimedia keyboard from USB bus power
This project is to modify a Dell multimedia keyboard into a Raspberry Pi Zero dedicated keyboard with external powered USB hub. You can find this article in my blog http://sizeofinfinity.blogspot.com.au/2017/06/modify-dell-multimedia-keyboa...
Fruit and Veggie Gaming Controller
In preparation for some Maker Faire's we were heading to last year, I wanted to combine the awesomeness of the Makey Makey platform, with the fun that is RetroPie. For those who don't know the Makey Makey, it's a fantastic platform that all...
ThingSpeak temperature & pressure logger
This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiFi module.
For this project, I designed my circuit and ordered a PCB using easyEDA. The project gets power from a USB port and uses a...
For this project, I designed my circuit and ordered a PCB using easyEDA. The project gets power from a USB port and uses a...
MakeCode STEM Arcade Machine
This project came about for a number of reasons. Firstly, we wanted a real showpiece for the school's Resource Centre. It's a real talking point and when people find out that it was made almost enti...
This project came about for a number of reasons. Firstly, we wanted a real showpiece for the school's Resource Centre. It's a real talking point and when people find out that it was made almost enti...
Super cheap Xbox 360 wireless adapter
This project is to build a super cheap wireless adapter based on Raspberry Pi Zero and ENC28J60 ethernet module for Xbox 360I have two Xbox 360 consoles and today I want to connect them together but I only have one OEM wireless adapter. It ...
Aircraft Lighting Model
The aim of this project was to create a working model of the aircraft exterior lighting systems. Initially, this started as a simple project for Uni, but I wasn’t having that. I wanted to learn something. So of course, I went over the...
RetroPie in a Cartridge
For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with any modern TV or monitor. Instead of using bulky and space taking cartridges and discs it's all on the console. For this build, we're going ...
Mailbox Delivery Notification System
Introduction
During the Covid lockdown, I needed something to do. The Postman or woman does not deliver mail every day as most bills come online. So I built this to notify me when the Pos...
The Amazon Alexa-Enabled Smart Pool System
This project is to allow remote control of my pool and associated lights with a dedicated display inthe house, a phone application and Amazon Alexa. Any and/or all of these input devices may be usedto control the pool. The pool temperature ...
IoT Plant Monitor
So, my wife wanted to have some small plants in the house. I didn’t, so we compromised, and got some plants. The only thing is that neither of us remembers to water them, so I wanted to build a sensor array to monitor the moisture con...
Retro Gaming Station
Hey, My son is turning 1 and I wanted to setup a retro gaming station for him to learn to game through the ages. I went with RetroPie as it is well documented and supports a range of emulators - and it's easy to setup.My RetroPie Gaming Ki...
PiicoDev Ecosystem In Fritzing
This project began with a desire to make circuit building readily approachable for students new to electronics by bridging the gap between schematic diagrams and working circuits. The PiicoDev ecosystem provides a very accessible introduct...
Garage Door Sensor
This project uses a US100 ultrasonic distance sensor to detect instances of a garage tilt door being left open and sends an alert via the IFTTT mobile app. Additionally, the device logs temperature and pressure to a Thingspeak channel using...
Lightbox
The idea was to leverage the light transmitting properties of clear acrylic sheeting and pass LED light through it; interfering the transmission using laser cut edges which would cause the light to highlight the lines thereby creat...
The idea was to leverage the light transmitting properties of clear acrylic sheeting and pass LED light through it; interfering the transmission using laser cut edges which would cause the light to highlight the lines thereby creat...
The Euclidean
I'm an amateur musician but a pretty serious classical & jazz pianist, and this project arose out of my interest in exploring the difference between writing music for synthesisers and music for piano. I work as a...
I'm an amateur musician but a pretty serious classical & jazz pianist, and this project arose out of my interest in exploring the difference between writing music for synthesisers and music for piano. I work as a...
Makey Makey Pencil Piano
After seeing how much fun people had using the Makey Makey as a gaming controller for our RetroPie setup, I decided that more fun, simple projects that can be made using household materials were in order. So today I present to you the piano...
3D-Printed GPS Speedometer
Introduction
I wanted a GPS speedometer that is portable, robust, and looks okay. I had been messing around with 3D printing and exploring GPS modules for a few years and wanted...
Raspberry Pi Desk Clock with Data Display
This project uses a Raspberry Pi and TFT display panel to provide a desk clock that also monitors our Home Solar and Battery system, and the weather, in one neat unit.
We recently installed a Solar Panel system and a Tesla Powerwall...
We recently installed a Solar Panel system and a Tesla Powerwall...
12V Portable Battery Box
This project creates a functional 12-volt portable battery case for camping or other outdoor activities.The battery box provides a 12V cigarette lighter socket for running lights with an on/off switch for ease of use. There is also an Ander...
3D Printed Pico Weather Display
I frequently check the weather on my phone, often finding it hasn’t changed. As there are already many screens around the house and even in our pockets or on our wrists that can display the weather forecast, I decided to create a display t...
WLED Hourglass Theatre Prop - DMX Over Wi-Fi!
I’ve been working in theatres for about 5 years. I’m a lighting technician for a few different venues and production companies, but I specialize in the engineering solutions behind our shows; I’m a Mechatronics Engineering student at UoN, ...
ATX Benchtop Power Supply
Despite having two high-quality variable (but analog) benchtop power supplies, I decided you can never have too many. I also specifically wanted a fixed, multi-output supply for standard project voltages such as 3.3V, 5V, 9V, 12V, ...
Despite having two high-quality variable (but analog) benchtop power supplies, I decided you can never have too many. I also specifically wanted a fixed, multi-output supply for standard project voltages such as 3.3V, 5V, 9V, 12V, ...
LoRaWAN Tank Level Sensor Node
My brother-in-law has a dairy farm in Victoria and many hours per week are wasted traversing the farm to check water tank levels, opening/closing valves, and other small tasks that could easily be remotely monitored and controlled. It was ...
The Great Doorbell Hack
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
UNITRAC
The UNITRAC (UNIversal TRACtion system) is a simple 3D printable conversion for the Black Gladiator-Tracked chassis, It’s designed to transform the large wheelbase platform into a self-contained propulsion system that has all the torq...
Raspberry Pi IoT Doorbell
This Raspberry Pi, IoT Doorbell is basically a simple smart Door Bell, which takes a photo of whoever rings it, and emails it to the specified email address, and keeps all the photos in a folder. (along with going Ding-Dong). Any Problems,...
Arduino E-Paper Clock
This project started with a desire to have a modern digital clock that would use the natural light of the room for illumination. This means the screen is always the right brightness, looking like paper rather than a traditional screen. By ...
433mHz Radio connected pool thermometer
I was wanting to know what the water temperature was without having to physically go and check and I was curious about how warm the water would get during a sunny day and how much heat was lost overnight. I am interested in the idea of home...
IoT Soundscape
I had been captivated by the sound levels of trains I could hear passing by Metford throughout the day/night. I wondered if a sound level sensor reporting data back over LoRa would help me understand when a train was noisy. I also like the ...
House Power and Solar Monitor
I’ve had a Current Cost Power Monitor for a number of years which worked well until we put solar on the roof. The Current Cost can’t determine which direction the power is flowing and so power generation and con...
I’ve had a Current Cost Power Monitor for a number of years which worked well until we put solar on the roof. The Current Cost can’t determine which direction the power is flowing and so power generation and con...
safePower
I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap for the capability they offer. I want to use them on small projects, stand-alone, and can't always guarantee power. As we know most Pi's don't...
Hogwarts Lights
Although there are commercially available lighting kits for Lego models, we found those that are available for this Hogwarts Castle can seem a little garish and don’t do the best job at concealing the wires. We felt that with t...
Pico Baro V2
Introduction:
The inspiration for this project stems back to my childhood when I was curious to find out how the mechanical barometer worked.
Introduction:
The inspiration for this project stems back to my childhood when I was curious to find out how the mechanical barometer worked.
Borg Cube for Scouts STEM Camp
Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...
Days2Bin: Pico Powered Bin Reminder
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed calendar changes every year! So I made a Raspberry Pi Pico W and GlowBit Matrix powered model wheelie bin which shows when the bins are due at a...
10" Home Lab Testing Rack
⚠️ This project features mains power For a lot of project development and testing, I’m always using a combination of testing and verifying power via USB, 12VDC, MIDI inputs and outputs, and other general IO. Havin...
YouTube Desktop Notifier
Do you get nightmares of losing your YouTube Subscribers? If you do, you are not the only one. Luckily I have made this "YouTube Desktop Notifier" to keep me up-to-date with my channels Subscriber and View Counts. This very simple DIY ...
Raspberry Pi Video Looper Display Installation | Overshare Video Festival
Introduction
A suspended ceiling display of forty repurposed screens and displays, each screening crowd-sourced content captured on mobile devices, installed in the entry to Testing Grounds...
Smart Watering System
Introduction This began as an idea after building a very basic single-channel unit. Commercial smart watering systems use a Wifi connection to the internet and get weather reports to determine the level of watering required. These systems...
LuMa 1 - The Neo Disco Ball
It is real and here it is! Including everything you need to make one a Luma 1 for yourself! So allow me to introduce you properly to the Luminator Mark 1. I'm talking all the ins and outs of this inside-out neo disco ball so you can ...
LoRa P2P Wireless Gate Alarm
Introduction
My front gate is a long way from the house at around 300m. I don’t want people wandering around my property without knowing about it. This project uses two Raspberry Pi P...
Parts List
Analogue Quad Oscillator Drone Synth
I have a peer-reviewed study on my desk and it confidently tells me that all the capacitors on planet Earth want to be synthesisers when they grow up. To make the world a better place, let's realise the dream of four fortunate elec...
Makers love reviews as much as you do, please follow this link to review the products you have purchased.