Search results for: 'header cable'
Jumper Wire 20cm Ribbon (M/F, 40pcs)
Brand: Core Electronics
Jump between male pins and breadboards easily with our 20cm ribbon jumper wires! Available in multiple colors, pre-terminated male to female, and can be unzipped to organize signals. Perfect for prototyping. Get 40 pcs in each pack.
$3.95 AUD, inc GST
JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST
Raspberry Pi GPIO 40-Pin Ribbon Cable
Brand: Core Electronics
Extend your Raspberry Pi's functionality with this rainbow ribbon cable!
$3.70 AUD, inc GST
JST PH 3-Pin Plug to Male Header Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$2.60 AUD, inc GST
JST PH 4-Pin to Male Header Cable - I2C STEMMA Cable - 200mm
Brand: Adafruit
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Adafruit are carrying these to match...
$3.30 AUD, inc GST
JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long
Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.90 AUD, inc GST
Raspberry Pi B - GPIO Ribbon Cable (40-pin, 150mm)
Brand: Sparkfun
This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity.
$9.15 AUD, inc GST
Panel Mount USB to 4-pin Female Header Cable - 6'
Brand: Sparkfun
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one end and a USB A connector on the other.
$6.50 AUD, inc GST
Ribbon Cable Premium Jumper Wires 10-Color F-F 3" (7.5 cm)
Brand: Pololu
These 3" (7.5 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with female connectors on both ends that work with 0.1" (2.54 mm)...
$4.60 AUD, inc GST
Ribbon Cable with Pre-Crimped Terminals 10-Color M-M 6" (15 cm)
Brand: Pololu
These 6" (15 cm) premium jumper wires are made from 26 AWG stranded copper ribbon cable with male crimp pins on both ends. Together with our 0.1" crimp...
$5.30 AUD, inc GST
Jumper Wire - JST-PH Black Red
Brand: Sparkfun
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST-PH connector on one end, bare cable on the opposite end.
$1.90 AUD, inc GST
Ribbon Cable - 120mm (2mm, 2x3-Pin)
Brand: Sparkfun
This 120mm IDC Ribbon Cable features a 2mm pitch and a 2x3-pin configuration, making it a versatile and essential component for various electronic...
$2.85 AUD, inc GST
JST SH Compatible 1mm Pitch 3 Pin to Premium Male Headers Cable - 100mm long
Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.95 AUD, inc GST
2.54mm 0.1" Pitch 16-pin Jumper Cable - 20cm long
Brand: Adafruit
These jumper cables are exactly what you need to connect common 0.1" header devices together. Sure you can tape together individual 1x1 header ...
$4.30 AUD, inc GST
Ribbon Cable Premium Jumper Wires 10-Color M-M 60" (150 cm)
Brand: Pololu
These 60" (150 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male connectors on both ends that work with 0.1" (2.54 mm)...
$53.05 AUD, inc GST
Ribbon Cable Premium Jumper Wires 10-Color F-F 36" (90 cm)
Brand: Pololu
These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with female connectors on both ends that work with 0.1" (2.54 mm)...
$33.35 AUD, inc GST
Jumper Wire - 0.1", 5-pin, 4"
Brand: Sparkfun
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$2.95 AUD, inc GST
Ribbon Cable Premium Jumper Wires 10-Color M-M 36" (90 cm)
Brand: Pololu
These 36" (90 cm) premium jumper wires are made from 22 AWG stranded copper ribbon cable with male connectors on both ends that work with 0.1" (2.54 mm)...
$33.35 AUD, inc GST
Ethernet Kit for Teensy 4.1
Brand: Teensy
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1...
$16.10 AUD, inc GST
Basic Fingerprint Sensor With Socket Header Cable
Brand: Adafruit
Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's easy to use and more affordable than ever!
$35.95 AUD, inc GST
Shrouded Box Header: 2x3-Pin, 0.100" (2.54 mm) Male
Brand: Pololu
These hard-to-find 6-pin (2×3) shrouded male headers are great general-purpose connectors and are perfect for AVR ISP programming and work with Pololu's 6-pin IDC sockets and 6-conductor ribbon cables with IDC connectors.
$2.50 AUD, inc GST
PicoProbe PCB kit
Brand: Pimoroni
Turn your Raspberry Pi Pico into a debug probe This PCB is designed to turn a Pico into a nice debug probe using the PicoProbe software. The kit provides...
$22.70 AUD, inc GST
Similar matches
Male Pin Header 2.54mm (1x40)
Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$0.45 AUD, inc GST
JST PH 2-Pin Cable – Male Header 200mm
Brand: Adafruit
For a really long time Adafruit assumed that the JST PH didn't have a free-hanging male header version. But then Adafruit found this JST-PH 2-pin Male Cable, and Adafruit were like...
$1.60 AUD, inc GST
Male Pin Header 2.54mm (2x20)
Brand: Core Electronics
Perfect for prototyping, the straight male header is a super common header type so grab a few and put your ideas to the test!
$1.50 AUD, inc GST
Raspberry Pi 5 M.2 HAT+
Brand: Raspberry Pi
Connect M.2-format PCIe and NVMe devices to your Raspberry Pi 5 with the M.2 HAT.
$21.29 AUD, inc GST
Male Pin Header 2.54mm (1x20)
Brand: Core Electronics
Perfect for prototyping, these straight male headers are a super common header type so grab a few and put your ideas to the test!
$0.35 AUD, inc GST
Header - 40-pin Male (Long Centered, PTH, 0.1")
Brand: Sparkfun
This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.
$2.70 AUD, inc GST
2.54mm 1x3-Pin Straight Female Header
Brand: Core Electronics
Got some 2.54mm | 0.1" pitch through holes on your PCB you need to connect to? Here's some headers you can use.
$0.11 AUD, inc GST
2.54mm 1x4-Pin Straight Female Header
Brand: Core Electronics
Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.
$0.16 AUD, inc GST
2.54mm 1x8-Pin Straight Female Header
Brand: Core Electronics
This is a 1 × 8 set of 2.54mm | 0.1" separated female headers perfect for small microcontroller breakouts and similar boards to allow easy access to a row of pins
$0.22 AUD, inc GST
2.54mm 1x6-Pin Straight Female Header
Brand: Core Electronics
Do you have a headerless breakout module, custom PCB, or other 2.54mm-pitch connection you need a reliable set of headers for? If so, then these are the kind of headers you're after.
$0.16 AUD, inc GST
40-Pin 2.54mm Round Male Pin Header
Brand: Core Electronics
Great for low-profile designs or prototyping with DIP IC's.
$1.40 AUD, inc GST
2.54mm 1x6-Pin Right Female Header
Brand: Core Electronics
For six pins you need to interface to at a right angle, these headers would be an easy option.
$0.26 AUD, inc GST
0.100" (2.54 mm) Female Header: 1x6-Pin, Straight
Brand: Pololu
This connector is a single-row, 6-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.
$1.65 AUD, inc GST
2.54mm 1x3-Pin Right Female Header
Brand: Core Electronics
Need a simple three pin connection parallel to your board? There are not many easier options than a female header such as this.
$0.16 AUD, inc GST
2.54mm 1x2-Pin Right Female Header
Brand: Core Electronics
Got two 0.1" seperated points on the edge of a board you need to connect to easily and permanently? In that case, there aren't many more simple options than a female header such as this.
$0.17 AUD, inc GST
2.54mm 1x2-Pin Straight Female Header
Brand: Core Electronics
These minature header blocks are perfect for when there are a couple points side-by-side you need to interface to.
$0.11 AUD, inc GST
0.100" (2.54 mm) Female Header: 1x7-Pin, Straight
Brand: Pololu
This connector is a single-row, 7-pin, straight female header strip designed to match 0.1" male headers. The order quantity must be a multiple of two.
$1.80 AUD, inc GST
0.100" (2.54 mm) Female Header: 2x6-Pin, Straight
Brand: Pololu
This connector is a double-row, 12-pin (2×6), straight female header strip designed to match 0.1" male headers.
$2.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.