Search results for: 'Pinout'

This is a screen for advanced hackers who like the look of a rectangle TFT screen with tons of pixels. The 3.2" square display has 320x820 RGB666...

If you want to interface with telco, retro, or industrial equipment, you'll probably run into RS-232 interfaces. The Adafruit RS232 Full-Pinout...

Controller Area Network (CAN bus) continues to be a popular communication standard in all sorts of applications from passenger vehicles to lighting control...

The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor...

Deliver two high-power outputs from your Pimoroni Yukon project, with this pair of power switches...

The Arduino Nano R4 without headers brings the robust performance of the RA4M1 microcontroller into the beloved Nano form factor, offering a compact and production-ready solution for embedded development, industrial automation, and custom hardware design.

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability.

5V Geared stepper motor

What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with Adafruit's favorite lil chip, the SAMD21 (as made famous in Adafruit's GEMMA M0 and Trinket M0 boards).

This small lidar-based distance sensor detects the presence of objects within 200 cm (79"). It has a single digital output that drives low when an object ...

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you...

This semiconductor gas sensor detects the presence of LPG, isobutane, and propane at concentrations from 300 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.

Transistors are powerful little electronic switches, and Adafruit really like these NPN transistors whenever Adafruit need to control medium-power electronics such as small...

Transistors are powerful little electronic switches, and when Adafruit's little NPN transistors aren't power enough for your project, Adafruit have been known to use these beefy...

Coming soon! Sign up to be notified when these are in stockThis is a screen for advanced hackers who like the look of a square TFT screen with tons of...

This is SparkFun Beefy 3 FTDI Basic Breakout for the FTDI FT231X USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. Built upon the same foundation as our 3.3V SparkFun FTDI Basic Breakout, the Beefy 3 is equipped with an AP2112K voltage regulator making this FTDI basic breakout board capable of handling a current load of up to 600 mA! With the addition of a more “Beefy” voltage regulator your will now be able to power a 3.3V project directly from the FTDI. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards.

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V...

Your very own TinyPICO V3 with MicroPython pre-installed. Comes with unassembled male headers and a JST PH battery connector.

ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module, Built in 4MB Flash, supports BLE/Zigbee/Thread wireless communication...