Search results for: 'Pololu Micro Metal Gearmotors'
- USB-C to MicroUSB AdapterSKU: CE09622 Brand: Raspberry Pi
Convert your Raspberry Pi 4 USB-C Power supply to micro USB.
- Pololu Machined Aluminum Bracket for 37D mm Metal GearmotorsSKU: POLOLU-1995 Brand: PololuThis machined aluminum gearmotor bracket lets you securely mount Pololu’s 37D mm metal gearmotors to your project. The six holes on the bracket face line up with the six mounting holes on the 37D gearbox, and the bracket features three tapped M3 holes on the bottom that can be used to mount it to a surface. The bracket includes nine M3 screws: three for mounting the bracket to a surface and six for mounting it to the gearmotor.
- Magnetic Encoder Disc for Micro Metal Gearmotors, 12 CPRSKU: POLOLU-2599 Brand: PololuThese magnetic discs can be used with Pololu's micro metal gearmotors with extended motor shafts as part of a quadrature encoder system that offers 12 counts per revolution. Appropriate Hall Effect sensors, such as those in Pololu's magnetic encoder pair kits, are required to complete the system. These discs are bulk-packaged and must be ordered in multiples of five. Pololu will package these to order and generally expect orders of up to a few hundred units to ship within a day.
- Optical Encoder Pair Kit for Micro Metal Gearmotors, 5VSKU: POLOLU-2590 Brand: PololuAdd quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 5 V.
- Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3VSKU: POLOLU-2591 Brand: PololuAdd quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 3.3 V.
- Pololu Stamped Aluminum L-Bracket Pair for 37D mm Metal GearmotorsSKU: POLOLU-1084 Brand: PololuThese aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes six M3 screws for securing the motor to the bracket. Each bracket also features fourteen mounting holes for M3 or #4-size screws (not included), giving you a variety of mounting options.
- JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Side-Entry (10-Pack)SKU: POLOLU-5099 Brand: PololuAdd connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...
- JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Side-Entry (2-Pack)SKU: POLOLU-5098 Brand: PololuAdd connectors to your micro metal gearmotors with these boards that feature side-entry, 2-pin male JST SH-type connectors. These boards are compatible...
- JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (10-Pack)SKU: POLOLU-5097 Brand: PololuAdd connectors to your micro metal gearmotors with these boards that feature back-entry, 2-pin male JST SH-type connectors. These boards are compatible...
- JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (2-Pack)SKU: POLOLU-5096 Brand: PololuAdd connectors to your micro metal gearmotors with these boards that feature back-entry, 2-pin male JST SH-type connectors. These boards are compatible...
- Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible)SKU: POLOLU-3081 Brand: PololuAdd quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
- Pololu Micro Metal Gearmotor Bracket Extended PairSKU: POLOLU-1089 Brand: PololuThis compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with the Pololu Wheel 42×19 mm and encoder. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.
- Pololu Micro Metal Gearmotor HPCB 6V 380:1SKU: POLOLU-4796 Brand: PololuThese tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes.
- Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18VSKU: POLOLU-4761 Brand: PololuAdd quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit
- Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18VSKU: POLOLU-4760 Brand: PololuAdd quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.
- Pololu Micro Metal Gearmotor Bracket Pair - BlackSKU: POLOLU-989 Brand: PololuThis compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The black plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. The brackets are sold in pairs, and each bracket comes with two #2 screws and two nuts.
- Pololu Stamped Aluminum L-Bracket Pair for Plastic GearmotorsSKU: POLOLU-2670 Brand: PololuThese aluminum gearmotor brackets let you securely mount Pololu's larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors. Each bracket also features two mounting holes and one mounting slot intended for #4-size screws (not included).Special Price $9.95 AUD, inc GSTRegular Price $11.70 AUD, inc GSTDelivered by Apr 21st
- Pololu 75:1 Micro Metal Gearmotor HPCB 6V with Extended Motor ShaftSKU: POLOLU-3074 Brand: PololuThis gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
- USB micro-B to USB-C Adapter (White)SKU: CE06429 Brand: Raspberry PiThis adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.$1.95 AUD, inc GSTDelivered by Apr 21st
- USB 2.0 Micro USB to USB-C Cable (1m)SKU: CE09933 Brand: Core Electronics
For Makers with modern laptops, use this cable to connect USB-C ports to micro-USB without any adapters.
- 100:1 Micro Metal GearmotorSKU: POLOLU-992 Brand: PololuThis gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 100.37:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 120 RPM and 40 mA free-run, 12 oz-in (0.9 kg-cm) and 0.36 A stall.
- 30:1 Micro Metal GearmotorSKU: POLOLU-993 Brand: PololuThis gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 29.86:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 440 RPM and 40 mA free-run, 4 oz-in (0.3 kg-cm) and 0.36 A stall.
- 298:1 Micro Metal GearmotorSKU: POLOLU-1094 Brand: PololuThis gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 297.92:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 45 RPM and 30 mA free-run, 40 oz-in (2.9 kg-cm) and 0.36 A stall.
- 50:1 Micro Metal GearmotorSKU: POLOLU-1098 Brand: PololuThis gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 51.45:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 40 mA free-run, 7 oz-in (0.5 kg-cm) and 0.36 A stall.
- 5:1 Micro Metal GearmotorSKU: POLOLU-1100 Brand: PololuThis gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 4.995:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 2500 RPM and 50 mA free-run, 1 oz-in (0.1 kg-cm) and 0.36 A stall.
Control Large GoBILDA DC Motors With a Raspberry Pi - Pololu Motoron HAT
This guide will demonstrate exactly how to control any large DC Motors that we stock with a Raspberry Pi Single Board Computer, through code or through a Bluetooth Controller. To clarify (in my mind) a large DC Motors runs at 12+ Volt...
Makerverse Micro SD Adapter - MicroPython Guide and Data Logging
Introduction This guide covers how to connect the Makerverse Micro SD Card Adapter to a Raspberry Pi Pico and program a basic data logging script in MicroPython. To follow along, it's best to have: A Makerverse Micr...
Make 3D Prints Look Like Chrome and Steel - Metallic Paints and Finishes For 3D Prints
Demonstrated here are two metallic finishes, that you can do to any 3D print, that will astound your friends and family when you tell them 'It was actually 3D printed and these are not metal at all'. These finishes are perfect to use for co...
Assemble a goBILDA Outlaw Chassis Kit - Plus Raspberry Pi and 8BitDo Control!
If you want a high-end robotics platform that is easy to expand with it does not get better than goBILDA! GoBILDA is a complete build system designed for makers, students, and educators. From curated kits, to many structural alum...
Make 3D Prints Look Like Gold - Gold Leaf and 3D Printed Components
Sometimes an electronic component will be so stunningly beautiful that you can't help but encase it in gold. That's what happened to me with the Pimoroni Micro Dot pHAT for Raspberry Pi Zero. Hopefully, you can relate. My go...
How to use a NFC Reader with Raspberry Pi
Near Field Communication (NFC) is used all and everywhere. As it stands there are over two billion NFC-enabled devices (many of them smartphones) in use today. This basically means over 20% of the world’s population has access t...
Getting Started with Servos | Examples with Raspberry Pi Pico
In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and finally how to use one with a Raspberry Pi Pico. To follow along you'll need: A Positional Servo, such as the Feetech FS90 Micro Servo A Con...
Getting started with your Onion Omega2/2+
In this tutorial we will learn how to set up the Onion Omega2/Omega2+ for the first time. You will require the following: Onion Omega2 or Omega2+ An Onion Omega2 Dock, such as: An Onion Omega2 dock, eg. Power Dock or Bre...
Setting up Your Retroflag NESPi Case with a Heatsink and Cooling Fan
By now, you’ve probably seen the fancy new Raspberry Pi cases we’ve got available; the NESPi case by Retroflag. Designed and styled specifically for retro gaming systems such as RetroPie, it offers everything you need to turn yo...
Onion Omega - First Time Setup Using the Command Line
In this tutorial, we will learn how to set up the Onion Omega2/Omega2+ for the first time using the command line. While the Omega2/2+ has a graphical setup wizard and a web-based GUI called the "Console," we have found both to ...
Alcohol Inks to Colourise Resin Prints - Three Different Methods
One of the special properties of transparent resin prints created by DLP 3D printers like the Creality LD-002R and SLA printers like the Formlabs Form 3 is how vibrantly you can colourise them with Alcohol Inks. Simply by dabbing on just a ...
How To Make and Crimp Custom Connectors
The wires in our circuits are often forgotten when we are planning our next big project, but the right connectors will a make your project look more professional and a lot easier to work with! In this tutorial, we are going to have a quick ...
Pycom Expansion Board 2.0 Overview
It would be good to have some understanding of Pycom microcontroller boards before reading this article. We won’t go into what capabilities each microcontroller board has. If you’d like an introduction, try our Pycom WiPy Overvi...
Controlling Standard Servos with Raspberry Pi
This guide will teach you how to control any small and big servos with a Raspberry Pi 4 Model B (worth noting any Raspberry Pi Board with GPIO pins can be able to be used in this scenario. Servos are an immensely useful way to turn ele...
Soldering 101
Imagine being a builder without a hammer, or a car without a brake, this is kind of useful, but nowhere near as useful as it could be. This is like being a maker/DIY’er/enthusiast without being able to solder. Sure you can breadboard ...
GlowBit Orb Snowflake & Bauble Kit - Pico Getting Started Guide
In this guide, we will be looking at how to set up the Glowbit Orb Snowflake and Bauble Kits. We will be looking at how to get going with the default code they ship with, breaking down how the code works, and learning how to modify it to m...
xTool P3 Overview | A New Standard for Making?
In this guide, we will be taking a hands-on look at the xTool P3, an 80-watt CO2 laser cutter that aims to bring industrial capability to a desktop format and price tag. We are going to be exploring its features, and seeing how this deskto...
How To Complete Your First Resin 3D Print
So, you have set up your shiny new resin 3D printer and now want to produce beautiful models. Well, this tutorial will tell you exactly what to do from filling the tank, starting a print via USB then the removal, cleaning, and final UV ligh...
Raspberry Pi Imager - How to Use
This will be a quick 101 on how to use the Raspberry Pi Imager so that you can Flash a new Micro-SD Card. Everything you need to use this Software will be found in this article. The contents of this guide can be seen below. - Download Loc...
Tips for Mooshimeter Maitenance
Now that you have picked up your Mooshimeter, there might be a few questions you have on keeping it working well for as long as possible. As the Mooshimeter is a battery powered device, eventually the day will come where you simply cannot c...
How To Replace Your FEP Film - Resin Printer Maintenance Tip
The FEP film is a layer of transparent thin plastic (that is double layered) that is installed on the bottom of a resin tank (or Vat) in all resin 3D printers. This film creates a way for the UV light or laser light to cure the liquid resin...
Prototyping a Circuit: Methods and Tools
Ah prototyping, the backbone of maker electronics, well really all electronics. Any successful device, product, or idea doesn’t just appear as a finished concept, it goes through stages of product and one of those is prototyping. In f...
Arduino Boards, Compared
We're going to compare each of the Arduino Boards available to Maker's and Electronics Enthusiats. We'll discuss the features of each board, provide an informative pinout diagram with tonnes of detail, and toward the end of the article, pro...
Overview of Resin 3D Printing and Calibrating the Print Platform with the Creality LD-002H
Resin 3D printers are an immensely powerful tool in the hands of a maker and they have never been more accessible. This will be a rundown on this technology, contrasting it to filament 3D printing and an explanation of tools whilst tea...
Understanding ESP32 Naming Conventions
Espressif is a constantly ground-breaking company that produces lots of really cool development modules which includes the ESP32. ESP32 Boards, ESP32 Dev-Kits, and ESP32 Modules (the part that gets soldered to the Board/PCB) are all about ...
Makerverse Audio Kit Guide | Play Music and Generate Tones
IntroductionWelcome to the guide for the Makerverse Audio Kit. This kit will allow you to build a music player, a musical keyboard, and a sound effect soundboard! To follow along you will need: The Makerverse Audio Kit The Makerverse ...
ONESIE Family - 3D Printable Cases for Raspberry Pi 4 Model B
The ONESIE family of cases come in three distinct models; Stealth, Maker and Hats. This will be a guide introducing the ONESIE family, the 3D printable monocoque stealth cases for Raspberry Pi 4 Model B, talk about what makes them di...
How to Add an SSD To Your Raspberry Pi 5 with the M.2 HAT
SSDs on the Raspberry Pi are not new. For many years now people have been enjoying NVME speeds on Raspberry Pis through the use of NVMe-to-USB adapters. But long gone are the days of annoying adapters flopping around and occupying a precio...
Pycom FiPy Overview
This is the Big Daddy of the Pycom range of devices. The Pycom FiPy has all these connection capabilities (with one tiny caveat): Wi-Fi 802.11b/g/n 16Mbps LoRa (all regions, not 433MHz) Sigfox Cellular LTE (Cat-M1/NB-IoT) Bluetooth L...
Data Logging with the Micro:bit and OpenLog
The Micro:bit by BBC is a great data collection tool, it just needs a little help remembering what it has measured! This tutorial is made for those Micro:bit projects where transmitting your sensor data over radio or Bluetooth to a computer...
"Hello World" with Raspberry Pi 3
Today we’re going to take a look at how to get started and setup that fancy Raspberry Pi you’ve just bought. If you’re still not sure exactly how the Raspberry Pi works, or what it can do, check out ‘What is a Ra...
Our Mooshimeter Review
We've been familiar with the Mooshimeter for a while now, we've got tutorials on Getting up and running with a Mooshimeter, how to datalog with your mooshimeter, taking voltage/current measurements with multi-meters and finally a whole arti...
Arduino, Learn the Lingo
Getting into the Arduino environment is a lot of fun but with so many acronyms and slang terms its easy to get confused. Knowing this first hand, I have put together a glossary of sorts for terms relating to Arduino, if you are new to the A...
How to Use Breadboards
Hello makers, if you love to prototype circuits and create electronic designs, then you’ll be familiar with the humble solderless breadboard. It’s where most electronic projects begin and is a familiar sight for tinkerers and in...
3D Printed Case For Raspberry Pi Pico and PiicoDev Boards
Let me introduce a new 3D printable case for the Raspberry Pi Pico and the PiicoDev ecosystem. There are variants of the case, one which allows you to wall-mount the system and another variation that makes it possible to charge the dev...
Getting Started with Circuit Scribe
What a glorious time we live in, where, as technology continues to evolve, so too does the ability to learn more about it and get hands on with concepts that would otherwise be out of reach, especially for young minds. Today, we’re go...
Pycom GPy & FiPy Cellular LTE Firmware Update
There are three levels of firmware upgrades that are required on Pycom gear. First, performing an upgrade on the firmware of any of the Pycom microcontrollers is a simple affair. Download the Pycom Firmware Update application as linked in t...
Identify Electrical Connectors
There are a ton of electrical wire connectors, too many to elaborate on in a single guide, however there are a couple of connectors that as a maker you will come across. Often when starting your way into the electronics world all you need ...
Pycom WiPy Overview
The Internet of Things(IoT) and its devices have been utilised by ‘DIYers’ and ‘Makers’ to connect projects to the internet and take advantage of the worldwide network we have created. Some might say a sentence with ...
Snap Circuits makes Electronics Fun and Educational
From breadboarding to soldering, the way we connect our components is critical to ending up with a working circuit. Before the new-age tech startups like littleBits and innoBits came along with their magnetic clip-together building blocks, ...
Raspberry Pi Pico W | Overview, Features and Specs
IntroductionLet’s take a look at the Raspberry Pi Pico W - a WiFi-enabled development board from Raspberry Pi. This overview article will explore the Pico W features and specifications. As always, there are additional resources at th...
DC Motor Control with an Arduino
Electronics is fun, so far we have covered off on communicating between devices, making LEDs flash and LCD screen operation. However using electricity to control some form of movement in your project is a fun and interesting aspect to inves...
How to add GPS to a Raspberry Pi Pico | Get Real-Time Location in Your Project!
In this guide, we will be learning how to use a GPS module with the Raspberry Pi Pico and MicroPython. We will be looking at; how GPS works, how to wire up and code the Pico to use the GPS module, and as a final step we will be putting it ...
How to Flash/Write Raspbian OS onto Raspberry Pi Compute Module 4 (CM4)
While the Raspberry Pi Compute Module 4s (CM4s) share a lot with the regular Pi 4 Model B, getting started with the flashing process can be quite different depending on which model you pick! This article aims to demystify that, so without f...
Makera Carvera Overview | The Most Approachable Industrial Desktop CNC Mill?
The Makera Carvera touts itself as a beginner-friendly CNC milling machine capable of carving through wood, plastic, brass, and aluminium, all while keeping a compact desktop footprint that still offers a highly capable 360 by 240 millimet...
Raspberry Pi Boards Compared
The Raspberry Pi has revolutionized the world of single-board computers, offering a platform for learners, hobbyists, and professionals to explore, create, and innovate. From its inception, the Raspberry Pi series has been a beacon of techn...
Our 8Bitdo SF30 Pro Controller Overview
The 8Bitdo SF30 Pro was launched at the end of 2017 by 8Bitdo in an effort to create the ultimate, ‘portable’ gaming controller. Having become known for their faithful recreations of vintage gaming controllers, the SF30 Pro is a...
Upgrade your Project for the Raspberry Pi 4
The New Version of the Raspberry Pi 4 has started going out to makers everywhere. If you are wanting to upgrade your old RPi3 project to take advantage of all the cool new features there are a few steps we are going to have to take first to...
Powering Portable Projects: Batteries
Want to make your project portable? We've put together a quick guide to get you up to speed on battery options and help you decide which batteries might be best for your project. Batteries are a whole different game to plug packs and bencht...
MOVE Mini Assembly Guide
The :MOVE MINI allows you to turn your micro:bit into a simple robot! In this guide, we will give you some tips and tricks for assembling the :MOVE mini. This is a DIY assembly item and takes 30-60 minutes to fully assemble. There is a grea...
The Lulzbot 3D Printers: Mini vs Taz
Hailing from Aleph Objects in Loveland, Colorado, the Lulzbot range of 3D printers are world renown for their quality, reliability and ease of use. The reason they're so popular? Apart from the gilded Lulzbot technical support (practically ...
Ultimaker Print Nozzles Overview and Installation
In your foray into the 3D printing sphere, you will likely just run into moments when using a new extruder nozzle type would be beneficial. An often-overlooked detail, different nozzles give all different kinds of advantages and with the ri...
How to add GPS to Your Arduino | Add Real-Time Location to Your Project!
In this guide, we will be learning how to use a GPS module with an Arduino and C++. We will be looking at; how GPS works, how to wire up and code an Arduino to use the GPS module, and as a final step we will be putting it all together in a...
Media Centre with Kodi and LibreELEC - Raspberry Pi 4 Model B
You ever wanted an Ad-Free and Bloatware Free Media Streaming Device that can run 4K movies with clean audio that transforms any Screen into a Smart TV. Sounds almost too good to be true but Raspberry Pi, Kodi and LibreELEC OS have swooped ...
Makerverse Essentials Kit Guide | Build Circuits and Code with MicroPython
IntroductionWelcome to the guide for the Makerverse Essentials Kit. This kit provides the fundamental hardware required to construct many of the kits in the Makerverse Kits range along with providing hardware which will continue to be usef...
Fix Raspberry Pi 4 HDMI Not Working With Specific Displays
If you've had issues getting your Raspberry Pi 4 to work with specific HDMI displays (monitors, TV's etc.) this tutorial has got you covered! It's a quick fix that just requires a bit of tinkering in the config.txt file that's present on al...
Raspberry Pi: Where It Began
The Raspberry Pi as we know it today is just the “tip of the iceberg”, the product of more than a decade of development, spanning 4 generations with up-to 18 boards and counting released so far. Alongside this development, there...
Pycom Expansion Board - Getting Started
Where do I start? If you’re new to programming Python is a great place to start! I’ve seen Python taught to primary school age children and I have used Python in a Machine Intelligence course at university. It’s no wonder...
How to Rotate Raspberry Pi Video Display / Screen
Like many things in the Raspberry Pi ecosystem, functions such as rotating the display output can be a little unintuitive at first. Or perhaps you’re not sure how to get rid of that annoying black outline on your screen. So, we’...
Modify G-Code to 3D Print Better
If you hang around 3D printers, X-Y plotters, CNC machines, drawing machines, or people who use any of them G-code is a term that will universally come up no matter where you find yourself in the world. But what is it? And how is it being u...
Raspberry Pi NOOBS Setup Tutorial
Welcome to our tutorial for using NOOBS (New-Out-Of-Box-Software) to install an OS (Operating System) for use with your Raspberry Pi. The NOOBS package includes access to seven popular Operating Systems: Raspbian Windows ...
DFRobot 8.9 Inch 1920x1200 IPS Touch Display For Raspberry Pi - Set Up Guide
It is time for a high-quality, complete package, 1920x1200 (HD) display set up with a Raspberry Pi Single-Board Computer. In regards to touch screens with Raspberry Pi have looked at Tiny GPIO HAT LCD displays, medium-sized AMOLED maker di...
Raspberry Pi 500+ Overview and Teardown
The Raspberry Pi 500+ is hot off the press, an all-in-one computer keyboard which is the latest version of Raspberry Pi's hundred series, and the premium version of the Pi 500. This overview will get into the nitty-gritty of what mak...
Getting Started with micro:bit
Check out our micro:bit in the classroom video if you'd like to see how micro:bit integrates into classrooms, years 7-12. After a quick review of the hardware, we'll fire up a micro:bit and write our first program. All you...
How to Program a MicroBit using Thonny
Let's get set up with scripting in Thonny for the Micro:bit. We'll install Thonny, configure for Micro:bit, and write our first script. All you'll need to follow along is a Micro:bit v2 GO kit Contents Install Thonny Set u...
PiicoDev Transceiver | Getting Started Guide
A radio transceiver is a device that can both transmit and receive radio signals, making it the perfect tool for communication on the go and remote projects! The PiicoDev Transceiver™ is a 915MHz radio that can send short messages up...
8Bitdo NES30 Pro Controller Review
Today, we’re looking at the 8Bitdo NES30 Pro. It’s a newer controller from 8Bitdo and one that I’m really excited about. It’s an interesting gamepad, with the styling and form factor taking cues from both the classic...
Micro:bit Temperature and Humidity Sensing
The Micro:bit has the ability to measure temperature by sensing the temperature of the silicon die inside the main CPU. This works because the Micro:bit runs cold, and the temperature of the CPU is usually a good approximation of ...
8Bitdo Zero Controller Review
It’s always a fun day when you get hands-on with a device as cool as the 8Bitdo Zero Bluetooth gamepad. 8Bitdo are known are for their re-creations of classic gaming controllers such as the SFC30 and NES30 which bring the magic of NES...
Pycom FiPy Getting Started
Say you want to build a sun-tracking solar panel. You could add a tiny computer, like an Arduino, to control it. That might be all you need. But what if you need to connect to it to control it from somewhere else? Connecting it into your ho...
What is the ESP32
The ESP8266 is the Serial to Wi-Fi SOC gaining steam back in August of 2014, no doubt you've heard of it; if not used one yourself. Since then, hundreds of IoT devices were built on this originally-undocumented device. With those projects a...
micro:bit in the classroom
Check out our Getting started with micro:bit video if you'd like to see a quick tutorial on writing a program, start-to-finish, with a micro:bit. In a Nutshell The micro:bit is a versatile and classroom-friendly, programmable ele...
Circuit Playground Express TV Remote
Have you ever lost or broken a TV remote before it's time? Have you ever wanted to spice up the way you change channels or inputs on your TV? Have you got a greedy housemate who always steals the remote off you? If any of these are the case...
Exciting Features - Ultimaker Cura
Ultimaker Cura is an excellent slicing software to get the best out of your 3D printers and make the greatest models it possibly can, but it can do so much more! Cura is a brilliant means to inspire and expand your own creativity particular...
Unconstrained 3D Printing with LulzBot's Dual Extruder v3
Dual Extruding with FDM 3D Printers is typically reserved for the most expert-level makers. By adding the ability to print with 2 materials, you open yourself up to a spread of conditions that simply didn't exist with a single extruder setu...
Fix the Built-in Camera - Ultimaker
The built-in remote monitoring camera and the live feed it provides makes for a fantastic tool of the Ultimaker S5 and Ultimaker S3 3D printers. You can now keep tabs on your prints remotely, easing the pain of a long-distance relation...
Drawing Schematics With Eagle
warning: this guide is dated and kept for legacy reasons. Links may not work. Welcome to part 1 of our Cadsoft Eagle tutorial. Put your hand up if you’ve always wanted to take the clunky, delicate circuit you’ve c...
Use a ESP32-CAM Module to Stream HD Video Over Local Network
Cameras in combination with artificial intelligence create arguably the most powerful sensor you can ever put on a microcontroller. So that’s exactly what we will do here with an ESP32-CAM Development Board that sports an inbuilt 2MB...
Never Have Filament Grinding Again - Ultimaker
Filament grinding is very unlikely to occur if your running an Ultimaker S5 3D Printer with Ultimaker materials or 3rd party supported materials. Filament grinding occurs when the knurled feeder gear slips against the filament instead of sm...
History of Arduino
So, after almost a week of researching, cross-referencing, double checking, and image hunting, I’m excited to show you guys my take on the history of Arduino, and the evolution of the Arduino hardware into what it is today. With so m...
Introducing CircuitPython: Adafruit Circuit Playground Express
CircuitPython is a variant of MicroPython that is designed with ease of use and simplicity in mind, and it works great with the Adafruit Circuit Playground Express. CircuitPython is based on the very popular Python programming language, the...
PiicoDev Precision Temperature Sensor TMP117 - Micro:bit Guide
Introduction This guide will help you read temperature data from your PiicoDev Precision Temperature Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit A PiicoDev Precision Temperature Sensor TMP117 A PiicoDev a...
Raspberry Pi Pico Workshop for Beginners
Welcome to the Raspberry Pi Pico Workshop, where you will learn everything you need to know to hit the ground running and start making your own projects with the Raspberry Pi Pico and MicroPython. This workshop is designed for complete beg...
Raspberry Pi AI Camera Quick-Start Guide
In this guide, we will be getting the Raspberry Pi AI camera up and running as quickly as possible, as well as taking a look at how to get started with it in your own projects. The Raspberry Pi AI camera is a unique and interesting piece ...
How to Build Your Ultimate RetroPie Gaming Console
Amid all the new controllers that 8Bitdo have brought out and the mountain of Raspberry Pi cases and accessories that are available, we’ve bundled everything together to create the ultimate RetroPie gaming console. If you’ve bee...
Makerverse Real Time Clock with Supercapacitor Backup - Raspberry Pi Pico Guide
Introduction This guide covers the basic use of the Makerverse Supercap Real Time clock on the Raspberry Pi Pico using our RV3028 MicroPython module. The MicroPython module implements some commonly used features of the RV3028 RTC but is no...
Getting Started with the Makera Carvera | Setup & First Cut
Have you just got your hands on a brand new Makera Carvera and want to get it making chips as soon as possible? Well, in this guide we will be taking a look at how to set up your Makera Carvera, as well as the Cyclone Dust Collector if yo...
Micro:bit Light and UV Sensing
Every Micro:bit has the ability to measure visible light, but what about UV light? Imagine that you are growing a plant on the window sill in a well-lit room. Does your plant have enough light? Plants need UV light to photosynthesize e...
Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi
This guide will teach you how to control up to 992 5V Servos through the GPIO pins on your Raspberry Pi! But more practically, without stacking multiple HATS (Hardware Attached on Top), this guide will teach exactly how to control sixt...
How to Control a Water Pump with a Raspberry Pi Pico
In this guide, we will be learning how to control a pump with a Raspberry Pi Pico. Whether you are pumping coolant in a project, making a DIY water fountain, or building a self-watering plant project, this guide will gear you up with every...
Micro:bit Soil Moisture Sensor
The Micro:bit is great for small portable projects like a soil moisture sensor. In this tutorial, we will walk through how to program a Micro:bit to make a reliable and consistent soil moisture sensor that will give consistent readings. The...
How to Set Up a Raspberry Pi Kiosk - Launch a Fullscreen Webpage on Boot!
In this guide, we will be transforming your Raspberry Pi into a bespoke device to interface humans with the web. This guide will walk you through setting up a Pi as a dedicated kiosk device, meaning it will seamlessly and automatically lau...
MicroPython for Micro:bit Workshop
Welcome to the MicroPython for micro:bit workshop! This workshop is aimed at makers who want to start programming with MicroPython, we will be using the micro:bit as it is very easy to use so we can cover the important concepts that will ap...
How to Control a Water Pump with an Arduino
In this guide, we will explore how you can use an Arduino to control a pump. Whether you're creating a cooling system, designing a DIY water fountain, or constructing an automatic plant-watering setup, this tutorial will provide all the kn...
PiicoDev Distance Sensor VL53L1X - Micro:bit Guide
Introduction This guide will help you read distance data in millimetres from your PiicoDev Distance Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit A PiicoDev Distance Sensor VL53L1X A PiicoDev adapter for Mic...
Waveshare 5.5 Inch AMOLED Screen for Raspberry Pi
Ever wanted a pocket computer with a Full HD screen (1080x1920)? Love tiny GPIO screens like this 3.5 Inch from Waveshare but want one that is a little bigger and higher resolution so that it is easier to read? Or want a really premi...
Internet of Things with Pycom and Adafruit IO - From Zero to Hero
Introduction We’re going from zero to hero. Starting from nothing we’ll get a WiPy communicating with Adafruit IO, an IoT service out on the Internet. We’ll be able to send data from the device to the cloud and control th...
Circuit Playground Express Workshop for Educators and Beginners
Welcome to the Circuit Playground Express Workshop! This workshop is geared toward educators and coding beginners, who want to get started programming with this easy to use platform. We will go over everything you need to know to get you st...
Getting Started with Voltage Dividers | A Practical Guide for Makers
In this guide we will be taking a practical look at Voltage dividers - one of the most fundamental circuits in the world of electronics and this guide will hopefully be the only guide a maker ever needs to read. We will be taking a look at...
How to Build Internet-Connected Electronics Projects
What do we mean when we talk about the "Internet of Things"? Mostly we're talking about tiny computers that have access to the internet and do some useful work. Unlike the computers we're used to holding in our hands, they don't have a touc...
Getting Started with YOLO Pose Estimation Recognition on the Raspberry Pi
Have you ever wanted to dive into computer vision? How about on a low-power and portable piece of hardware like a Raspberry Pi? Well, in this guide we will be setting up some with OpenCV and the YOLO pose estimation model family on the Ra...
How to set up YOLO Computer Vision on a Raspberry Pi | Conda & Ultralytics
In this guide, we will be learning how to install the Ultralytics YOLO Vision Package on a Raspberry Pi with Conda. This package is going to allow you to run nearly any YOLO model supported by Ultralytics, and we will also give you some de...
4G and GPS HAT For Raspberry Pi - Waveshare SIM7600X
Love your Raspberry Pi but wish it had even more connectivity akin to your mobile phone. Then the Waveshare 4G HAT is the solution for you! HAT simply means Hardware attached On Top. With this installed on your Raspberry Pi Single Board Co...
Face Recognition With Raspberry Pi and OpenCV
In this guide, we are going to be teaching you how to set up your Rasberry Pi to detect and recognise faces using OpenCV and the Facial-Recognition library, two fantastic open-source projects. In this set up all of the data and processing ...
How to make a Raspberry Pi NAS - A NAS-Berry that Runs Open Media Vault
Welcome to the best article on setting up an OpenMediaVault-based NAS on a Raspberry Pi Single Board Computer! This guide is the fastest and best way to go about it. Raspberry Pi single-board computers are purpose-built to run 24/7, with a...
PiicoDev Motion Sensor MPU-6050 - Micro:bit Guide
Introduction This guide will help you read motion data from your PiicoDev® Motion Sensor and a Micro:bit. To follow along, it's best to have: A Micro:bit v2 A PiicoDev Motion Sensor MPU-6050 A PiicoDev adapter for Micro:bit ...
Getting Started with YOLO Object and Animal Recognition on the Raspberry Pi
Have you ever wanted to dive into computer vision? How about on a low-power and portable piece of hardware like a Raspberry Pi? Well, in this guide we will be setting up some with the YOLO vision model family, OpenCV and the COCO object l...
YOLO Object Detection on the Raspberry Pi AI Hat+ | How to Write Custom Python Code
In this guide, we will be exploring how to set up YOLO object detection with the Raspberry Pi AI HAT, and more importantly, learning how to apply this in your Python projects. We will be taking a look at how to install the required hardwar...
Raspberry Pi Workshop for Beginners
Welcome to the Raspberry Pi Workshop for Beginners! Here you'll be able to follow along with our series of bite-sized videos that cover everything you'll need to know to get started with your Raspberry Pi, and start making awesome project...
YOLO Pose Estimation on the Raspberry Pi AI Hat+ | Writing Custom Python Code
In this guide, we will be setting up and using YOLO pose estimation with the Raspberry Pi AI HAT, as well as exploring how to use it alongside your own Python code so you can use pose estimation in your projects. We will be taking a look a...
Meshtastic for Makers Workshop
Welcome to the Meshtastic for Makers Workshop, a short course that teaches you everything you need to know about Meshtastic so you can go out and start wirelessly sending information in your projects with the Meshtastic network. This works...
Quadbeest - A Flying Strandbeest
Introducing to you today, the Quadbeest, the next evolutionary step in the Strandbeest genealogy. It seemed to be about time for Strandbeests to evolve to take over the air, so I made it happen. Able to be controlled over a kilometre in the...
mintyPi
This is an awesome project that takes about 6 hours to complete. Hours upon hours of endless fun thereafter! Ideally, some prior soldering experience is advantageous but if you take your time and practice before you start it's beginner fri...
GraviTrack Enhancements - Lights and Sound
Introduction Searching for solar panels and related items on the Core Electronics website; I came across the Solarbotics GraviTrack Marble Machine Kit. I thought the kit would be a good educational tool for the grandkids. The kit was a hit...
Racing Simulator Motion Platform
Hi. My son and I have made our first Racing Simulator Motion Platform. It has been a challenge but we now have a playable situtation
It has been a long journey, starting off with info from the great people at www....
Hi. My son and I have made our first Racing Simulator Motion Platform. It has been a challenge but we now have a playable situtation
It has been a long journey, starting off with info from the great people at www....
Electronica Botanica
This piece combines recycled electronics extracted from decommissioned computers and new electronic components. I had an idea I wanted to incorporate a lighting element into a contemporary sculpture so it was just a matter of coming up with...
House Power and Solar Monitor
I’ve had a Current Cost Power Monitor for a number of years which worked well until we put solar on the roof. The Current Cost can’t determine which direction the power is flowing and so power generation and con...
I’ve had a Current Cost Power Monitor for a number of years which worked well until we put solar on the roof. The Current Cost can’t determine which direction the power is flowing and so power generation and con...
A 3D Printed Ukulele
Here is a project I just could not help myself but build. A 3D printable Ukulele with a body as large as I could fit standing upright on the printers here. The intention was to make it as large as possible, using no supports, and without th...
Broken Door Trim Clips
I recently picked up a used BMW E46 and noticed the door panel trims were all hanging on by some duct tape. When I went to inspect, I noticed that all the clips had been broken and replaced with silicone rubber to try and hold it to the doo...
LuMa 1 - The Neo Disco Ball
It is real and here it is! Including everything you need to make one a Luma 1 for yourself! So allow me to introduce you properly to the Luminator Mark 1. I'm talking all the ins and outs of this inside-out neo disco ball so you can ...
Concrete Lamp
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1st and 2nd halves are cast in 2 steps using the same mould twice. I had a few failed attempts at making the mould entirely from sta...
The concrete body of the lamp (which, to my eye look a bit like a leek) is made is two halves. The 1st and 2nd halves are cast in 2 steps using the same mould twice. I had a few failed attempts at making the mould entirely from sta...
Autozem
Introduction So now everything is available in this day and age, and all those childhood dreams can now come true as parts, technology and software has come a long way. I had recently taken up the hobby, RC planes. Eventually I learnt ho...
Makey Makey Skill Tester
This is the third project I've put up using the Makey Makey, and it's incredible fun, but it's also the simplest. Today I'm going to show you how to make a simple Skill Tester game complete with sound effects using a Makey Makey board and s...
Articulated Mule
Converting a Mule into an articulated 4 wheel vehicle. A 'Mule' is/was a hand trolley with a motorised elevatable platform. What for? Just for fun, want to be able to control it using the R2D2 droid inventor app via LittleBits boards, why ...
Raspberry Pi Microscope
The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mount components. Its main function is to verify the quality of solder joints and ensure there aren’t any short circuits. With the addition of...
The Great Doorbell Hack
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
Do you want a quick, easy, cheap RF remote control for your Raspberry Pi projects? Well, look no further than the front door! As you've probably got a half-duplex RF setup you've never considered using in a project before. Try thi...
Vehicle GPS Logger and Speedometer
Purpose
To display time and speed to a driver while logging timestamped raw latitude, longitude and speed as returned by the GPS satellite network. This allows a driver to double-check th...
Sound Effects Button
The idea for this project came when a friend of mine flew over from Western Australia to visit, and during his stopover in Adelaide, he did what any adult would do; visit the airport novelty store and buy some random stuff. It was pretty mu...
Water Tank Level Sensor
Update: Community member Chris has had a go at remaking this project after the original project contributor Denver made the original code repository private. GitHub links below will not work but the original project has been kept here for...
Super cheap Xbox 360 wireless adapter
This project is to build a super cheap wireless adapter based on Raspberry Pi Zero and ENC28J60 ethernet module for Xbox 360I have two Xbox 360 consoles and today I want to connect them together but I only have one OEM wireless adapter. It ...
RetroPie in a Cartridge
For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with any modern TV or monitor. Instead of using bulky and space taking cartridges and discs it's all on the console. For this build, we're going ...
Pico Baro V2
Introduction:
The inspiration for this project stems back to my childhood when I was curious to find out how the mechanical barometer worked.
Introduction:
The inspiration for this project stems back to my childhood when I was curious to find out how the mechanical barometer worked.
IoT Plant Monitor
So, my wife wanted to have some small plants in the house. I didn’t, so we compromised, and got some plants. The only thing is that neither of us remembers to water them, so I wanted to build a sensor array to monitor the moisture con...
Environment Monitor - V2
This project started due to the smoke haze that enveloped our area during the 2019 and 2020 bushfires. I wanted something to check the air quality of my home and maybe find areas where it needed better sealing. In addition, the BMP280 senso...
Portable Arcade Emulator
Introduction
I am a Mechanical Engineer, and after 30 years in industry I now teach Engineering at High School. I create various projects in my spare time and bring them to school to inspir...
Retro Gaming Station
Hey, My son is turning 1 and I wanted to setup a retro gaming station for him to learn to game through the ages. I went with RetroPie as it is well documented and supports a range of emulators - and it's easy to setup.My RetroPie Gaming Ki...
ESP32 IR-Triggered Camera with Home Assistant Integration
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
I love the ESP line-up. I started by messing around with the ESP8266 and I completely fell in love with it. The 8266 is all I ever wanted from a microcontroller: WIFI connectivity, a dec...
Lightbox
The idea was to leverage the light transmitting properties of clear acrylic sheeting and pass LED light through it; interfering the transmission using laser cut edges which would cause the light to highlight the lines thereby creat...
The idea was to leverage the light transmitting properties of clear acrylic sheeting and pass LED light through it; interfering the transmission using laser cut edges which would cause the light to highlight the lines thereby creat...
Retro Hand held Pi Zero
I bought a Pi zero w from Core Electronics for a friend, also bought the official case too but thought I'd fit the Pi into something he can show off! I used an old hand held game case I had laying around, I had to remove the original circu...
Keypad entry to caravan using Arduino
I used to sleep in a caravan on my grandparent's property and as amenities were inside the house I had to go in and out of it quite regularly. I got sick of fumbling around with keys to go in and out of my caravan, so this project uses an A...
Mini Desk Vacuum
Chances are if you are anything like me, being a maker is often an excuse to create as big of a mess as possible during the duration of a project. And after the project is finished? You are left with an enormous mess to clean up, taking awa...
Simple Relay Timer
Introduction This project started because I needed to replace a water tap timer that had seen better days. The aim was to use a Raspberry Pi Pico and a couple of PiicoDev boards to do what the water timer did. The actual stopping a...
Handheld Retropie
Once you go down the retro gaming rabbit hole, that's it, you're not getting out without putting together your own gaming console. It all began with my hacked PSP, which I was running emulators on. Then I wanted to run them on my big screen...
BuzzBox
Do you ever wanna pump up some tunes but you don't know how to play a MIDI file? Fear not, the PiicoDev Buzzer modules let you stack up multiple tones into a song. Find your MIDI, export it through a script, upload it and get grovin'! ...
Smart City Tunnel with PiicoDev
Tunnels are a critical part of road infrastructure and they feature some pretty cool tech. This Smart Tunnel project demonstrates some of the technology involved and how some real-world problems might be solved. Features RFID Trip...
Kid’s Music Box
I want to make a portable music box that my 2 year old kid can operate intuitively on her own. So, Spotify or any other on-demand music platform with tablets and Bluetooth speakers are out of the question. Remember the good old days of putt...
Stream Airplay to Your Pi Zero
The Raspberry Pi Zero W is a tiny, yet powerful little device. Coupled with a Pimoroni Speaker pHat, it can be easily turned into a portable Airplay speaker which allows you to stream your music anywhere you want.Parts you'll need: Raspb...
UNITRAC
The UNITRAC (UNIversal TRACtion system) is a simple 3D printable conversion for the Black Gladiator-Tracked chassis, It’s designed to transform the large wheelbase platform into a self-contained propulsion system that has all the torq...
grinder_timer
Making a dumb coffee grinder slightly less dumb. This is a programmable timer tethered to a Rancilio Rocky coffee grinder. The Rocky is a "dumb" grinder and electrically very simple. Basically it's an ac motor with an on/off switch and a m...
YAM: Monitoring Animal Enclosures
YAM (or YetAnotherMonitor) I keep more than 20 enclosures of Australian native lizards and turtles and I want to make sure they are all in an appropriate environment. To that end, I built a microcontroller-based system to monitor the tempe...
Smart Mirror with Raspberry Pi
I had first seen smart mirrors online several years ago and have been meaning to create one ever since, my requirements were to be able to see the time, weather, calendar and news. The great thing about it is the unlimited possibility for c...
Wefted Waveforms
This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro-sculpture.
The freestanding structure is formed from wire mesh and papier mache. It is then painted and wired ...
This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro-sculpture.
The freestanding structure is formed from wire mesh and papier mache. It is then painted and wired ...
Spirit In A Box Halloween Trick
Introduction
This project was born from the desire to craft a captivating and spine-tingling magic trick that would add an air of mystique to a Halloween and supernatural-themed party that ...
LoRa P2P Wireless Gate Alarm
Introduction
My front gate is a long way from the house at around 300m. I don’t want people wandering around my property without knowing about it. This project uses two Raspberry Pi P...
SOLARBOI
Since I was young, I've always loved to explore. Over the years, I've tinkered with RC cars and played with planes, which were always plenty of fun. But I always dreamed of going out further - out into the real world, far beyond the confine...
IoT Pet Feeder
The objective of this project was to create an Internet of Things (IoT) device that could give pet access to a food bowl when a text message command was sent from a remote location. I had never done an IoT project before, so I wanted to ke...
Infinity-Mirror Table
An infinity mirror creates a striking optical illusion - a tunnel of light that seems to tear through space. I built this infinity-mirror table using some addressable LEDs, a Particle Photon and easily obtainable timber supplies. Check out...
Pi Zero Motion Sensing Camera
The Pi Zero Motion Sensing Camera is a portable security camera using a Pi Zero 2W, Pi Zero camera, Battery Pack, and Case. I started this to have a taskable security camera with motion capture & notifications. I had some spare P...
Datalogging Weather Station (Battery Powered)
Bill of Materials
- Arduino Uno R3
- Power Timer. I used the TPL5110...
Bill of Materials
- Arduino Uno R3
- Power Timer. I used the TPL5110...
Desktop Infinity Mirror (Lasercut!)
A smaller version of our amazing Infinity-Mirror Table - the Desktop Infinity Mirror compresses all the colourful goodness into a picture frame-sized display. The entire design is made from laser-cut acrylic that we cut in-house. Check out ...
Nintendo Wii Portable | Project G-Wii
Do you love your Wii and its ability to play all GameCube games perfectly but wish you could take it on the go like a Gameboy?
Well, I definitely did and if you're like me so do you. And here is the right place...
Do you love your Wii and its ability to play all GameCube games perfectly but wish you could take it on the go like a Gameboy?
Well, I definitely did and if you're like me so do you. And here is the right place...
safePower
I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap for the capability they offer. I want to use them on small projects, stand-alone, and can't always guarantee power. As we know most Pi's don't...
Smart Watering System
Introduction This began as an idea after building a very basic single-channel unit. Commercial smart watering systems use a Wifi connection to the internet and get weather reports to determine the level of watering required. These systems...
3D-Printed GPS Speedometer
Introduction
I wanted a GPS speedometer that is portable, robust, and looks okay. I had been messing around with 3D printing and exploring GPS modules for a few years and wanted...
Borg Cube for Scouts STEM Camp
Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...Introduction
What does one make for a Startrek-themed STEM camp for Scouts? Especially when given the Search and Rescue (SAR) activity base to run. Why this base you ask? Usually I run a radio d...
Spectral Animations with a DIY MSGEQ7 I2C Device
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorporated we take word count very seriously. We believe in short, focused, and enjoyable writing which hints at the horizons of our imagination (...
Makers love reviews as much as you do, please follow this link to review the products you have purchased.