Parts included with the Tamiya 70195 Wall-Hugging Ladybug. |
---|
Tamiya 70195 Wall-Hugging Ladybug assembled but not decorated. |
---|
The wall hugging ladybug squiggles along a wall in a zig-zag manner. When the bump sensor makes contact with the wall, a switch directs power to the left motor, which moves the ladybug to the right and away from the wall. When the bump sensor loses contact, the switch flips and directs power to the right motor, moving the ladybug to the left and towards the wall again. This simple behavior allows the robot to follow almost any vertical surface on its left.
This is a very easy kit to put together. The electronics—motors, power switch, and bumper switch—are pre-assembled (no soldering is required) and snap into the plastic body with ease. Assembly only takes a few minutes, making this an excellent kit for beginners. The only tool required is a diagonal cutter, though Tamiya also recommends using a modeling knife to remove excess plastic.
Stickers for the black spots and eyes are included, but the black paint that is needed to paint the head as shown in the product picture is not. Tamiya recommends their TS-29 semi gloss black paint, though Pololu got good results just using generic black spray paint for plastics from Home Depot.
Tamiya also makes a wall-hugging mouse which is identical to the ladybug except for cosmetic differences. If you are looking for something that will be a bit more of an assembly challenge, check out Tamiya’s Robocraft Series of small mechanical animals that crawl, jump, or run with the use of gearboxes similar to the ones in the Tamiya gearbox kits.
Because this kit has two independent motors for differential drive, it can also serve as a base for your own project. There is ample space for adding your own electronics, and you can readily modify the plastic base.
Note: The wall-hugging ladybug is a kit; assembly is required. One alkaline AA battery is required but not included (the ladybug is not intended for use with NiMH batteries). Paint such as Tamiya’s TS-29 semi gloss black paint is required for painting the head of the ladybug but not included.
People often buy this product together with:
Tamiya 71102 Mechanical Kangaroo - Two Leg Jumping Type |
Tamiya 70198 Wall-Hugging Mouse |
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments