SIM7000A Arduino NB-IoT Expansion Shield

SKU: DFR0763 Brand: DFRobot

Retired Product

Replaced by: CE04922
This product has been replaced by: CE04922
This product is no longer available. This page is only for reference.

Introduction

NB-IoT (Narrow Band-Internet of Things) technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN (Wide Area Network), which also called as LPWAN. NB-IoT operates in authorized frequency spectrum. It can be directly deployed to GSM, UMTS, LTE without any interference of current networks, while the bandwidth consumption is just about 180KHz.

This SIM7000A Arduino NB-IoT/LTE/GPRS expansion shield is a wireless communication module produced by DFRobot and the design is based on SIMCom SIM7000A. This wireless communication module is designed for Arduino controllers, supporting multi-frequency LTE-FDD communication, dual-frequency GPRS/EDGE communication, NB-IoT communication. No matter prototype developments or small-batch productions, SIM7000A Arduino NB-IoT/LTE/GPRS expansion shield is the best solution to applications of low power consumption, low latency and meddle-throughput. Besides onboard GNSS (Global Navigation Satellite System), SIM7000A supports American GPS, Russian GLONASS, European Galileo, Japanese QZSS and Chinese BeiDou Navigation Satellite System. It can be widely applied to IoT applications such as long-distance control, moving tracking, long distance data uploading and shared bikes.

SIM7000 Series Selection Guide

Product SIM7000E SIM7000A SIM7000C
Form factor 24*24*2.6 24*24*2.6 24*24*2.6
Frequency 
Bands
Cat-M B3/B5/B8/B20/B28 B2/B4/B12/B13 B1/B3/B5/B8
Cat-NB B3/B5/B8/B20/B28 B2/B4/B12/B13 B1/B3/B5/B8
GSM 900/1800MHz 900/1800MHz
Temperature GNSS -40℃ ~ +85℃ optional -40℃ ~ +85℃ optional -40℃ ~ +85℃ optional
Electrical Features
Supply Voltage Range(V) 3.0~ 4.3 3.0~ 4.3 3.0~ 4.3
Power 
Consumption
Power Off(uA) 7 7 7
PSM(uA) 9 9 9
Sleep(mA) 1 1 1
Idle(mA) 11 11 11
Data Transfer
Cat-M(Kbps) 300(DL)/375(UL) 300(DL)/375(UL) 300(DL)/375(UL)
Cat-NB(Kbps) 34(DL)/66(UL) 34(DL)/66(UL) 34(DL)/66(UL)
EGPRS(Kbps) 85.6(DL)/85.6(UL) 85.6(DL)/85.6(UL)
Software Features
Protocol TCP/UDP/LWM2M/COAP/MQTT/ FTP/HTTP/TLS/DTLS/NTP TCP/UDP/LWM2M/COAP/MQTT/ FTP/HTTP/TLS/DTLS/NTP TCP/UDP/LWM2M/ COAP/MQTT/FTP/ HTTP/TLS/ DTLS/NTP
FOTA
Embedded AT
Firmware Upgrade USB/FOTA USB/FOTA USB/FOTA
Interfaces
SIM Card 1.8V/3.0V 1.8V/3.0V 1.8V/3.0V
UART
USB
PCM
ADC
I2C
Certification
Regulatory

RoHSREACHIMDARCMTelstra

SparkCE(RED)GCFDeutsche TelekomVodafoneRCM

RoHSREACHGCFFCC

PTCRBAT&TVerizonIC

RoHSREACHCCCCTA

SRRCMobileUnicomTelecom

Carrier TELSTRA/VDF*/ORANGE*/TIM*/ GCF/Deutsche Telekom

AT&T/VERIZON/ROGERS

*/PTCRB/GCF

CMCC/CUCC/CT

The SIM7000A Arduino NB-IoT/LTE/GPRS expansion shield supports both SIM card and NB-IoT card synchronously. You can plug in a common SIM card to achieve traditional GSM applications, such as make a phone call and send message. You can also plug in a NB-IoT card to realize NB-IoT data transmission. Besides, this expansion shield provides a BME280 environmental sensor. So it could be a prototype to develop NB-IoT projects, monitoring temperature, humidity and pressure.

Features

Operating Voltage: 5V (NOTE: The module will consume great amount of current immediately when connected to the network. So the external power supply is needed at work.)
Input Voltage: 7~12VDC (VIN range: 6~20V)
Communication Module: SIM7000
  • Single-Band TDD-LTE B39
  • Quad-Band FDD-LTE B1/B3/B5/B8 (SIM7000A)
  • Quad-Band FDD-LTE B3/B8/B20/B28 (SIM7000E)
  • GPRS/EDGE 900/1800 MHz
  • Output power- GSM900: 2W- DCS1800: 1W
  • Control Via AT Commands
  • Operation temperature: -40℃ to +85℃
  • GNSS (GPS, GLONASS, BeiDou, Compass, Galileo, QZSS)
  • Firmware update via USB 2.0
Support SIM card and NB-IoT card (NOTE: Please ensure the SIM frequency range been used is included in the frequency range it supports).
BME280 Environmental Sensor 
  • Temperature Measuring Range: -40℃~+85℃, resolution of 0.1℃, deviation of ±0.5℃
  • Humidity Measuring Range: 0~100%RH, resolution of 0.1%RH, deviation of ±2%RH
  • Pressure Measuring Range: 300~1100hPa
  • Humidity Sampling Time: 1s
  • Operating Temperature:-30℃~+85℃
  • Dimension: 2.1 x 2.7inch /53.4 x 68.6mm

Documents

Shipping List

  • SIM7000A Arduino NB-IoT/LTE/GPRS expansion shield x1
  • GSM Spring Antenna x1
  • GPS Internal Antenna x1

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Pico-Dog Motion Activated Audio Alarm

An instant response security system that actually works!If you've got security cameras tied to clou...
An instant response security system that actually works!If you've got security cameras tied to clou...

WaveJumper: Music Sample Slicer on a Breadboard

It was a dark and stormy night, and Pix was bumbling around with nonsense again. I was thinking of...
It was a dark and stormy night, and Pix was bumbling around with nonsense again. I was thinking of...

PiicoDev Ecosystem In Fritzing

This project began with a desire to make circuit building readily approachable for students new to ...
This project began with a desire to make circuit building readily approachable for students new to ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.