The LinkIt™ Connect 7681 development board provides you with easy access to the five GPIO pins and one UART port — each with an LED — of the MediaTek MT7681 chip, to quickly connect peripheral controllers and electronic circuits. The MT7681 — compact Wi-Fi SoC with embedded TCP/IP stack — is provided on the LinkIt™ Connect 7681 module, co-designed with AcSiP. This module, which is only 15 x 18mm, is also available separately for direct integration into your product’s PCB. (Also see LinkIt™ Connect 7681 module).
The LinkIt™ Connect 7681 development board is part of the LinkIt™ Connect 7681 development platform from MediaTek Labs. This development platform delivers you the tools and documentation to prototype your IoT device and create its final design.
LinkIt™ Connect 7681 development platform from MediaTek Labs
Features
Access to the five GPIO pins and one UART port provided by MT7681, with attached LEDs
Integrated Wi-Fi antenna
Power over USB (Micro USB port).
Open source hardware reference design, including schematics, layouts and pin details.
Specification
Chipset Core: MT7681 ANDES N9
Clock Speed: 80MHz
Flash: 1MB, RAM: 64KB
Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
GPIO Voltage: 3.3V
PWM Output pin Count: 5
PWM levels: 0~20
UART Voltage: 3.3V
Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mode
Dimensions: 50 x 31 mm
Other: Onboard reset push-button
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments