Search results for: 'tsop infrared receiver'

IR Transmitter Module is designed for IR communication when paired with IR receiver module.

Infrared IR proximity distance sensor can detect the presence of an object within a distance of 10±5mm to 80±20mm, can be embedded in detection devices...

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5 V and has a typical sensing range up to approximately 24 inches (60 cm).

Add an easy to use end-stop sensor or filament run-out sensor to your printer/project!

Detects objects blocking light. Features ITR9608 photoelectric switch, 5.0mm photonic gap, rapid response. Ideal for counting, speed detection, and card...

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control...

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA and has a typical sensing range up to approximately 12 inches (30 cm).

This simple device operates at 940nm and works well for generic IR systems...

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce...

This is a digital IR Proximity Sensor with button and indicator. It provides adjustable detection distance within 0 to 200cm and comes with real-time status feedback...

An optical reflective sensor is a composite electronic device with two elements - an IR LED and an IR photo-transistor. The IR LED blasts light, and when...

Ever wanted a simple way of activating your robot from across the room? We designed this remote controller to be as simple, small, and affordable so that for the majority of the projects you've built, you will no longer need to move constantly to swtich it on/off.

The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tuned for a 56 kHz carrier frequency. This is the IR receiver used in the Pololu IR Beacon.

The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a few feet. They are sold in packs of three units.

While designing our IR decoding breakout we noticed the TSSP series of chips from Vishay, these are simpler than more 'remote control' receivers...

The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a...

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.