Search results for: 'hardware'
Learn
White Nylon Screw and Mounting Kit -M2
Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...
$16.35 AUD, inc GST
Metal Screw Nut and Mounting Kit -M2
Brand: DFRobot
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The...
$22.60 AUD, inc GST
Black Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...
$35.30 AUD, inc GST
White Nylon Screw and Stand-off Set – M2.5 Thread
Brand: Adafruit
Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...
$31.40 AUD, inc GST
Mounting Kit (Screws and Nuts)
Brand: DFRobot
This mounting kit provides you different types of screws and nuts which are most commonly used in DFRobot's projects here at DFRobot. We use them to mount circuit boards and help build robots.
$19.65 AUD, inc GST
M3 Mounting Kit (Standoffs)
Brand: DFRobot
This M3 mounting kit provides you with different types of standoffs with screws and nuts which are most commonly used in DFRobot's projects. We use them to mount circuit boards and help build robots.
$38.25 AUD, inc GST
KKSB DIN Rail Mount Kit with Screws
Brand: KKSB
Mount your KKSB cases securely with this black aluminum DIN rail mount clip, compatible with 35mm Top Hat Rails and featuring pre-drilled holes plus included mounting screws for easy installation.
$8.65 AUD, inc GST
Standoff Kit - 210 Piece
Brand: Sparkfun
This 210 piece brass standoff kit insures you'll always have a set handy...
$40.45 AUD, inc GST
10 sets M3 * 6 nylon screws
Brand: DFRobot
These screw can be used to isloate your circuit board. It is suitable for all kinds of circuit boards, sensors, mechanical mounting.
$2.30 AUD, inc GST
10 sets M3 * 5 mounting screws
Brand: DFRobot
These screws can be used to install your circuit board, sensors and mechanical mounting.
$1.35 AUD, inc GST
10 sets M3 * 8 mounting screws
Brand: DFRobot
These screws can be used to install your circuit board, sensors and mechanical mounting.
$1.35 AUD, inc GST
Machine Screw: #2-56, 3/16″ Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 3/16″ (0.1875″) long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.20 AUD, inc GST
Machine Screw: #4-40, 1/2" Length, Phillips (25-pack)
Brand: Pololu
This #4-40, pan-head screw is 1/2" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.80 AUD, inc GST
PiicoDev Mount for Raspberry Pi and goBILDA
Brand: PiicoDev
Mount your Raspberry Pi and a couple of PiicoDev modules to your goBILDA creations!
$4.32 AUD, inc GST
Raspberry Pi Hat Hardware Kit
Brand: Sparkfun
Effortlessly mount any standard Pi HAT onto your Raspberry Pi 3, 4, or 5, even with a bulky cooling fan or heat sink installed. This harware kit provides...
$18.30 AUD, inc GST
Machine Screw: #4-40, 1 1/4" Length, Phillips (25-pack)
Brand: Pololu
This #4-40, pan-head screw is 1 1/4" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$11.15 AUD, inc GST
Machine Screw: #2-56, 7/16" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 7/16" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.70 AUD, inc GST
littleBits Mounting Boards
Brand: LittleBits
Mounting boards come 2 to a pack and allow you to keep your circuit intact and move it around with ease! Simply snap together your littleBits circuit and press the feet of your modules into the holes of the mounting board.
$33.99 AUD, inc GST $34.95
10 sets M3 * 6 clear nylon screws and nuts
Brand: DFRobot
These clear nylon screws and nuts can be used to fix your circuit board, sensors and mechanical mountings. Used in applications where moderate strength, electrical insulation, and great resistance to corrosion are required.
$2.70 AUD, inc GST
Machine Screw: #4-40, 1" Length, Phillips (25-pack)
Brand: Pololu
This #4-40, pan-head screw is 1" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$6.75 AUD, inc GST
Threaded Steel L-Bracket (3 Hole) - 4 Pack
Brand: goBilda
This Threaded Steel L-Bracket can be used as a robust 90° connector or as reinforcement to an existing junction. Both sides have three.....
$9.45 AUD, inc GST
Leopard Imaging Camera Mounting Hardware Kit
Brand: Sparkfun
This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings...
$2.15 AUD, inc GST
M4 Hardware Starter Pack (2625 Pcs)
Brand: goBilda
Don't let a hardware shortage hang up your build! Whether you're an FTC team looking to stock up on the most commonly used attachment.....
$329.95 AUD, inc GST
Stacking M2.5 Hardware Kit for STEMMA QT and RP2040 Trinkey
Brand: Adafruit
Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble...
$2.70 AUD, inc GST
Alchitry Standoff Hardware
Brand: Sparkfun
Protect your Alchitry board by adding these stylish standoffs!
The bolts protrude about 2mm below the board which is just further than the lowest part on...
$6.15 AUD, inc GST
Computer Repair Screw and Standoff Kit
Brand: Adafruit
The Computer Repair Screw and Standoff Kit contains all those bits and pieces that get lost whenever installing stuff into your computer or electronics...
$32.45 AUD, inc GST
VESA Mounting Kit for LattePanda & SBC Cases
Brand: DFRobot
This VESA mount is specially designed for LattePanda or other SBC cases. It can be used with VESA compatible display and brackets to hide the LattePanda...
$37.15 AUD, inc GST
GNSS Antenna Mounting Hardware Kit
Brand: Sparkfun
This GNSS Antenna mounting hardware kit gives you what you need to mount your antenna to a structure or support...
$54.20 AUD, inc GST
Stepper Motor Mount with Hardware - NEMA-17 Sized
Brand: Adafruit
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...
$23.25 AUD, inc GST
Machine Screw: #2-56, 3/8" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 3/8" (0.375") long. It is made from steel, is zinc-plated, and comes in packs of 25...
$3.35 AUD, inc GST
Machine Screw: #2-56, 1" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 1" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$6.95 AUD, inc GST
Machine Screw: #2-56, 3/4" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 3/4" (0.75") long. It is made from steel, is zinc-plated, and comes in packs of 25...
$4.85 AUD, inc GST
Machine Screw: #2-56, 1/4" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 1/4" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.15 AUD, inc GST
Machine Screw: #2-56, 5/16" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 5/16" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$3.40 AUD, inc GST
Clear Acrylic Lens Holder + Hardware Kit for HalloWing
Brand: Adafruit
Here is the perfect kit for mounting a convex lens (glass or plastic) to your HalloWing! This holder has been laser-cut specifically for lenses with a lip-edge...
$5.60 AUD, inc GST
Machine Screw: #2-56, 1 1/4" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 1 1/4" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$9.25 AUD, inc GST
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
Brand: Adafruit
A super-specifically-laser-cut enclosure that turns your 4x4 'Trellis into a handheld light/music maker! Perfect for your next cool interface, MIDI instrument, control...
$33.20 AUD, inc GST
Machine Screw: #4-40, 5/16" Length, Phillips (25-pack)
Brand: Pololu
This #4-40, pan-head screw is 5/16" long. It is made from steel, is zinc-plated, and comes in packs of 25.
$4.10 AUD, inc GST
Clear Acrylic Enclosure + Hardware Kit for Adafruit CLUE
Brand: Adafruit
Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and capacitive pads.
$9.50 AUD, inc GST
Machine Screw: #2-56, 1/2" Length, Phillips (25-pack)
Brand: Pololu
This #2-56, pan-head screw is 1/2" (0.5") long. It is made from steel, is zinc-plated, and comes in packs of 25...
$3.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.