Search results for: '16 pin flexible printed circuit'

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.

Here comes a really ultra thin low-power flexible LED strip! It only has a width of 2.5mm and thickness of 1mm. With 60 LEDs per meter, this LED strip can...

Here comes a really ultra thin low-power flexible LED strip! It only has a width of 2.5mm and thickness of 1mm. With 120 LEDs per meter, this LED strip...

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...

Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40-pin flex connectors (both are bottom...

FPC cables are super thin and flexible. They're often used in electronics when a a round cable would be too bulky, especially if you're dealing with 50 contacts...

Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice...

This 24-pin FFC / FPC Extender is very simple. It lets you connect two 24-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length.

A 22-pin, 100mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...

Connect this to that when a 24-pin FPC connector is needed. This 10 cm long cable is made of a flexible PCB. It's A-B style (sometimes referred to as...

This 50-pin FFC / FPC Extender is very simple. It lets you connect two 50-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length.

This 20-pin FFC / FPC Extender is very simple. It lets you connect two 20-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit)...

This is a 16-pin surface mount dual contact 0.5mm pitch ZIF FPC connector...

FPC cables are super thin and flexible. They're often used in electronics when a round cable would be too bulky, especially if you're dealing with...

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter.

This 30-pin FFC / FPC Extender is very simple. It lets you connect two 30-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit)...

Use this 25 cm long cable with our 40-pin FPC to 2x20 IDC Plug and Socket adapter PCBs to extend your Raspberry Pi's GPIO capabilities. Note you'll have to keep an eye on where Pin 1 is on the ribbon cable, on the adapter PCBs, and your HAT or Bonnet of choice.

This 40-pin FFC / FPC Extender is very simple. It lets you connect two 40-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length.

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Right Angle 2x20 IDC Female Socket Header Adapter

A 22-pin, 50mm flat, flexible cable with 0.5mm pitch. These cables are A-B style, so pin one on one side will match with pin one on the other side. Use...

Here is an easy solution for extending your Raspberry Pi's GPIO capabilities. This is a 40-pin FPC to Straight 2x20 IDC Male Plug Header Adapter

This 60-pin FFC / FPC Extender is very simple. It lets you connect two 60-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit)...

This 50-pin FPC SMT top-contact connector fits perfectly with Adafruit's 2.8" TFT display with resistive touch screen. It is fine pitch so it is not so easy to solder!...

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male...

Connect this to that when a 24-pin FPC connector is needed. This 25 cm long cable is made of a flexible PCB. It's A-B style (sometimes referred to as...

Connect to those pesky 0.5mm pitch connectors that you may run across with an FPC stick. Adafruit designed this for use in house, to quickly connect to 50pin 0.5mm pitch...