Search results for: '14 awg wire'

This wire stripper and cutter works with six standard wire sizes from 10 to 20 AWG solid (12 to 22 AWG stranded). It has curved, cushioned handles for added comfort, and the serrated nose can be used to bend and shape wire.

This module protects a connected load from reverse voltages down to -60 V. This version acts as an ideal diode, blocking reverse current from output to...

This module protects a connected load from reverse voltages down to -60 V. This version acts as an ideal diode, blocking reverse current from output to...

XT60 connectors are able to handle 60A continuous and 180A peak when using 12AWG wire (150A peak for 14AWG wire). The connectors have.....

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with standard 0.1" perf boards but the pins are thick enough (1.0mm OD) that you may need to increase the hole diameter on some perf boards.

Precision side cutters for fine cutting applications Sharp, precision ground cutting edges with an extra full flush cut Suitable for cutting soft copper wires of...

Connect this to that without soldering using these quick terminal blocks. They allow connecting of two sets of four wires together using just a flat-head screwdriver...

This 6A BEC / Voltage Regulator reduces input voltage down to one of four selectable output voltages. Its screw terminals accept 14-26AWG.....

This board is a simple compact carrier of Allegro’s ACS72981LLRATR-050U3 Hall effect-based linear current sensor, which offers a low-resistance (~0.2 mO)...

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors.

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors to your own 14- to 20-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 male connectors.

This is the compact version of a simple carrier for Allegro’s CT432-HSWF65MR TMR-based, electrically isolated current sensor that is optimized for high...

This module protects a connected load from reverse voltages down to -60 V. This version does not block reverse current, making it suitable for...