Adafruit PyPortal Pynt - CircuitPython Powered Internet Display - 2.4 TFT

SKU: ADA4465 Brand: Adafruit

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

 

The PyPortal Pynt is the little sister to Adafruit's popular PyPortal - zapped with a shink ray to take the design from a 3.2" diagonal down to 2.4" diagonal screen - but otherwise the same! The PyPortal is our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface GUIs, all open-source, and Python-powered using tinyJSON / APIs to get news, stock, weather, cat photos, and more – all over Wi-Fi with the latest technologies. Create little pocket universes of joy that connect to something good. Rotate it 90 degrees, it’s a web-connected conference badge #badgelife.

The PyPortal uses an ATMEL (Microchip) ATSAMD51J20, and an Espressif ESP32 Wi-Fi coprocessor with TLS/SSL support built-in. PyPortal has a 2.4″ diagonal 320 x 240 color TFT with resistive touch screen. PyPortal includes: speaker, light sensor, temperature sensor, NeoPixel, microSD card slot, 8MB flash, plug-in ports for I2C and 2 analog/digital pins, 3D files for custom enclosures / lanyard fastening. Open-source hardware, and Open-Source software, CircuitPython and Arduino. The device shows up as a USB drive and the code (Python) can be edited in any IDE, text editor, etc.

Compared to the original PyPortal, the Pynt does not include a ADT7410 temperature sensor. Other than the ADT7410, the Pynt's display, processor, STEMMA conectors and WiFi have the exact same wiring as the original 3.2" PyPortal so all Arduino/CircuitPython code will run exactly the same - just smaller!

The M4 and ESP32 are a great couple - and each bring their own strengths to this board. The SAMD51 M4 has native USB so it can show up like a disk drive, act as a MIDI or HID keyboard/mouse, and of course bootload and debug over a serial port. It also has DACs, ADC, PWM, and tons of GPIO. Meanwhile, the ESP32 has secure WiFi capabilities, and plenty of Flash and RAM to buffer sockets. By letting the ESP32 focus on the complex TLS/SSL computation and socket buffering, it frees up the SAMD51 to act as the user interface. You get a great programming experience thanks to the native USB with files available for drag-n-drop, and you don't have to spend a ton of processor time and memory to do SSL encryption/decryption and certificate management. It's the best of both worlds!

Technical Details

Product Dimensions: 67.0mm x 43.0mm x 11.0mm / 2.6" x 1.7" x 0.4"

Product Weight: 31.4g / 1.1oz

    This product is listed in:

    Retired

    Product Comments

    Exact shipping can be calculated on the view cart page (no login required).

    Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

    We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

    • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
    • $7+ for Standard Post (typically 6+ business days, tracked)
    • $11+ for Express Post (typically 2+ business days, tracked)
    • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

    Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

    Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

    International Orders - the following rates are for New Zealand and will vary for other countries:

    • $12+ for Pack and Track (3+ days, tracked)
    • $16+ for Express International (2-5 days, tracked)

    If you order lots of gear, the postage amount will increase based on the weight of your order.

    Our physical address (here's a PDF which includes other key business details):

    40 Aruma Place
    Cardiff
    NSW, 2285
    Australia

    Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

    Have a product question? We're here to help!

    Write Your Own Review

    Guides

    The Maker Revolution

    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

    Projects

    The Snooze Logger - A Wearable Sleep Position Monitor

    Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
    Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

    Spectral Animations with a DIY MSGEQ7 I2C Device

    Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
    Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

    VisionSphere: Camera Motion Detection for Raspberry Pi

    A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
    A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
    Feedback

    Please continue if you would like to leave feedback for any of these topics:

    • Website features/issues
    • Content errors/improvements
    • Missing products/categories
    • Product assignments to categories
    • Search results relevance

    For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

    Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

    Makers love reviews as much as you do, please follow this link to review the products you have purchased.