3 Megapixel Audio IP Camera

SKU: AS9834

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

A professional 3 megapixel IP network camera for use in high end surveillance installations. Supports 30fps at 1280 x 720 or 8fps at 2592 x 1920. Connects to a standard RJ45 ethernet connection and streams footage across a network for convenient remote monitoring. Supports multiple streams to up to 16 clients. Streaming can be triggered by external alarm input or motion detection. You can even be notified instantly by email when recording is triggered. Supports ONVIF protocol for integration with most network video recorders.

Features

H.264 compression
3 megapixel CMOS image sensor
Supports ONVIF
SD card slot for onboard storage
High sensitivity microphone
Speaker output
Motion detection
Fully adjustable image quality
Adjustable brightness, contrast, sharpness, white balance and exposure
Supports multiple simultaneous streaming
Email or FTP on motion detect or video loss
External sensor alarm triggering

Specifications

System: CPU: TI DM365 SoC Flash: 32MB RAM: 128MB
Image Sensor: HIGH QUALITY 5-MEGAPIXEL 1/2.5”CMOS
LENS: SUPPORT AUTO IRIS C/CS MOUNT LENS
Video:
– H.264: 30 fps at 1280x720 , Highest Resolution: 8 fps at 2592x1920
– MPEG4: 30 fps at 1280x720 , Highest Resolution: 8 fps at 2592x1920
– MJPEG: 30 fps at 1280x720 , Highest Resolution: 8 fps at 2592x1920
– Compression: H.264, MPEG-4 & MJPEG Streaming:
– Triple Codec (H.264、MPEG-4、JPEG) Selectable
– Support Simultaneous multiple streams
– BNC connector for video output ; NTSC/PAL video output switch
Image Settings:
– Adjustable image size, quality, and bit rate
– Time/Date stamp and text caption overlay.
– Configurable brightness, contrast, saturation, sharpness, white balance and exposure AGC、AWB、AES、BLC
Audio Format:
– MPEG-4 AAC audio encoding
– G.711 audio encoding
– Built-in high sensitive microphone with 5M maximum audible area. Supports audio mute
– Support External Speaker for Alarm siren
Networking:
– INTERFACE: 10/100 Mbps Ethernet, RJ-45
– SUPPORTED PROTOCOL: IPv4, TCP/IP, DHCP, HTTP, FTP, SMTP, RTSP, SNTP, DNS
– SUPPORTED BROWSER: Microsoft Internet Explorer 6.0 or above
Alarm And Event: Motion Detection
Management:
– 2 D/I & 2 D/O for external sensor and alarm
– Alarm siren output (require external speaker)
– Event notification using SMTP, or FTP
Users:
– 16 clients on-line monitoring at the same time
– Multi-level user access control with password protection
On-board Storage: SD/SDHC card slot : Stores snapshots and video clips
Maintenance: Supports online firmware upgrade
I/O:
– RJ-45 Ethernet x 1, Power connection x 1, SD-card slot x 1, Auto Iris Plug x 1,

– RS-485 x 1, Alarm I/O x 1 , Reset Button x 1
Power: DC12V、PoE (OPTIONAL)
Weight: ≈345 g
Dimensions: 152L x 70W x 50H mm
Operating Temperature: 0 - 45 °C
Humidity: 90%

Downloads

Datasheet

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review