GRIS 150M Miniature WiFi(802.11n) Module

SKU: FIT0628 Brand: DFRobot

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.

Introduction

Does it still bother you that you cannot access the Internet anytime anywhere? Here comes a new mini wireless network card, plug and play. Bring you a fast and stable wireless network!
This is a 150M miniature USB WiFi module that fully complies with IEEE 802.11n standard, up to 150Mbs data rate and more efficient data transmission in LAN. It supports 64/128/256-bit WEP data encryption, as well as WPA/WPA-PSK, WPA2/WPA2-PSK secure authentication mechanism, which greatly improves the security of data transmission. Besides that, the WiFi module adopts CAA technology to detect signal interference. When there is wireless signal interference around, the bandwidth mode will be adjusted automatically to avoid interference so as to enhance the stability of wireless network. With function of soft router, the wireless card can be used as a router to distribute network to smart-phone and tablet PC. The module can still provide excellent signal receiving ability and steady wireless signal even the intelligent antenna has been integrated into an ultra-compact body.
Besides the commonly used communication device like phone, tablet PC and desktop, the WiFi module can also be suitable with all sorts of mini PC such as Raspberry Pi and PYNQ-Z2 development board.

Specification

  • Wireless Standard: IEEE 802.11B/G/N
  • Antenna Gain: 2dBi
  • Transmission Speed: 150Mbps (Maximum)
  • Transmit Power: 20dBm
  • Interface Type: USB2.0
  • Support Operating System: Windows 2000 /XP /Vista /WIN7 /WIN8 /WIN10 /LINUX /Mac7 8 9
  • Frequency Range: 2.4~2.4835GHz
  • Working Environment: non-extreme environment
  • Security: WEP, WPA/WPA-PSK, WPA2/WPA2-PSK
  • Operating Temperature: 0°C-40°C
  • Storage Temperature: -40°C~70°C
  • Operating Humidity: 10%~90% RH, non condensing
  • Storage Humidity: 5%~90% RH, non condensing
  • Package Dimension: 21*14*7mm(L*W*H)/0.83*0.55*0.28”

Shipping List

GRIS 150M Miniature WiFi(802.11n) Module x1

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

The Snooze Logger - A Wearable Sleep Position Monitor

Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...
Everyone needs a good night’s sleep!One of the factors affecting sleep quality is sleep posit...

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.