EL Tape - Red (1M)

SKU: COM-10796 Brand: Sparkfun

Retired Product

Replaced by: ADA445
This product has been replaced by: ADA445
This product is no longer available. This page is only for reference.

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon.

These can be driven with any of the EL inverters and sequencers that Sparkfun carry and come in a variety of bright colors (check below for other colors). This particular ribbon is 1 meter long, 15mm wide and illuminates red. It is attached to a 20cm cable which is terminated with a JST PH connector.

Dimensions: 1m long, 15mm wide

Documents:

This product is listed in:

Retired

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Spectral Animations with a DIY MSGEQ7 I2C Device

Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...
Frequency Reactive LEDs, i2c Protocol, Raspberry Pi, and Other Adventures.Here at Pix Incorpor...

VisionSphere: Camera Motion Detection for Raspberry Pi

A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...
A simple camera motion detection system for Raspberry Pi. Definitely written with Aussie's in mind ...

Arduino E-Paper Clock

This project started with a desire to have a modern digital clock that would use the natural light ...
This project started with a desire to have a modern digital clock that would use the natural light ...
Feedback

Makers love reviews as much as you do, please follow this link to review the products you have purchased.