8 Channel Public Address Mixer

SKU: AA4420A

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

Developed after extensive consultation with Australian pro sound contractors, this 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. Features include: selectable phantom power for electret/condenser type microphones on each input, optional vox muting of line programs, bass and treble controls (microphone channels can be routed through tone controls or bypassed as desired), individual level controls for each channel input together with master level control. A 600 Ohm/0dBm XLR balanced line output is provided enabling bridged output connection to up to 16 power amplifiers, including the Redback Phase 4 range.

Features

6 microphone and 2 line inputs
All mic inputs are 3 pin XLR balanced
Line inputs via twin RCA sockets
Separate bass and treble tone controls
Individual input and master volume controls
Optional VOX muting of line inputs
Optional phantom power for each mic input
Microphone bass cut internally selectable
Mic inputs routed via tone controls or bypassed
24VDC input

100% developed, designed & assembled in Australia.
Single 1976 Redback PA products have been manufactured in Perth, Western Australia. With over 35 years experience in the commercial audio industry, our distribution network offers consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products

Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of bulletproof reliability. We offer a 10 Year Warranty on all Australian Made Redback products. Our in-country service department has all the know how to answer technical queries and provide timely service. Read more about this industry leading warranty.

Specifications

Auxiliary
No. of Channels: 2
Sensitivity (master full): 260mV
Signal to Noise Ratio: better than 76dB
Frequency Response (±3dB): 60Hz - 20kHz
Input Impedance: 100k Ohm
Muting Level: -50dB
Mode: Unbalanced
Connector Type: Stereo RCA
Tone Control
Bass Control: ±9dB at 80Hz
Treble Control: ±10dB at 10kHz
Bass Cut Switch on Microphone
Switch “ON”: -6dB/Octave from 150Hz
Phantom Power
Voltage: 12V
Output Impedance: 3.4k ohm
Microphone
No. of Channels: 6
Sensitivity (master full): 1.2mV
Signal to Noise Ratio: better than 71dB
Frequency Response (±3dB): 60Hz to 20kHz
Input Impedance: 600 Ohm
Mic Impedance: 200 - 600 Ohm nominal
Mode: Balanced
Connector Type: 3 Pin XLR Female
Output
Signal to Noise Ratio :
(all controls mid way) -85dB, ref 0dBm
(all controls maximum) -58dB, ref 0dBm
Impedance: 600 Ohms

Distortion: Less than 0.06%
Max Output Level: +19dBm
Mode: Balanced
Connector Type: 3 Pin XLR Male
*Specifications subject to change without notice.

Downloads

Instructions

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

40 Aruma Place
Cardiff
NSW, 2285
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review