# Wireless Programming Module For Arduino

**Type:** Product page · **SKU:** TEL0037 · **Brand:** [DFRobot](https://core-electronics.com.au/brands/dfrobot-australia)
**Page:** https://core-electronics.com.au/wireless-programming-module-for-arduino.html ([markdown](https://core-electronics.com.au/wireless-programming-module-for-arduino.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

Introduction

Getting tired of plug and unplug the USB cable when you debugging the Arduino project? This wireless programming module is designed for wireless upload skectch/codes to Arduino. With up-to 5 meters range, you can bring your laptop and do a wireless programming for your already deployed Arduino based devices which is hard to open. Cut the wire, and try this superb communication module.

This module can also be used as a standard bidirectional wireless communication module with up to 20 meters range and 115200 bps speed(line in sight). When uses as communication modules, it exchanges data as a transparent serial port. Only Tx/Rx will be required to do the transmission.

- Suitable for outdoor Arduino based devices.
- Suitable for Arduino based robots.
- Suitable for thoese devices which are hard to reach.
 
Its pin out is compatible with XBEE socket. You will need at least a Xbee Adapter and one of the following shield to perform the wireless programming.

- [Xbee Adatper](https://core-electronics.com.au/xbee-usb-adapter.html)[ V2](https://core-electronics.com.au/xbee-usb-adapter.html)
- [DFRduino IO Expansion Shield V5](https://core-electronics.com.au/io-expansion-shield-for-arduino-v5.html)
- [DFRduino Mega IO Expansion Shield V1.](https://core-electronics.com.au/catalog/product/view/sku/DFR0093)2
- [Mega IO Expansion Shield V2.1](https://core-electronics.com.au/mega-io-expansion-shield-v2-3-for-arduino-mega.html)
- [DFRduino Xbee Shield](https://core-electronics.com.au/xbee-shield-for-arduino.html)
 
![](https://core-electronics.com.au/media/remote_images/1_FxXEo7.jpg)

NOTE:

1\. You will need a pair of this module to perform wireless programming.

2\. It's not compatible with Arduino Leonardo series processor.

It is compatible with:

- DFRduino Duemilanove
- DFRduino Mega
- Romeo v1.1
- Arduino Uno
- Arduino Duemilanove or Nano w/ ATmeg328
- Arduino Diecimila,Duemilanove,or Nano w/ ATmega168
- Arduino Mega (ATmega1280)
- Arduino Mini
- Arduino BT w/ ATmega328/168
- LilyPad Arduino w/ ATmega328/168
- Arduino Pro or Pro Mini (5V,16MHz) w/ ATmega328/168
- Arduino Pro or Pro Mini (3.3V,8MHz) w/ ATmega328/168
- Arduino NG or older w/ ATmega168/ATmega 8
 
Specification

- Supply Voltage:3.3V
- Working current: 10mA
- Working Temperature: 0 - 70 C
- Interface: UART (TTL)
- Support Baud Rate:1200/2400/4800/9600/14400/19200/28800/38400/57600/115200
- Communication Range: 20 Meters (line in sight)
- Frequency Band:2.4Ghz
 
Documents

- Wiki doc
- Configuration Tools Software (024 windows)
- Latest Software(Beta)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/t/e/tel0037-1.jpg)