Wire Stripping Gauge (Seeed Studio)

SKU: SS114990082 Brand: Seeed Studio

Retired Product

Search for an alternative

This product has been retired. It is no longer available, but this page has been kept for reference.

The wire stripping gauge is the tool that enables you to efficiently and precisely prepare wires used with a solderless breadboard. It’s successfully funded on Kickstarter.

When you make a circuit on a breadboard, didn't you ever experience you failed to finish joining in attempting to hook up the lead to the breadboard without cutting extra length of lead? Or, when you cut the lead and try to hook it to the breadboard, didn't you ever get frustrated by different lengths of each leads? Here is the answer for you, Wire Stripping Gauge!

Take your gauge, and try to use it by the following steps.

1.Attach the Wire Stripping Gauge on a wire stripper.

2.Anchor a piece of wire to the gauge and strip the covering with the stripper.

3.Bend the part without covering by 90 degree with the hole on the gauge.

4.Measure the wire with the scale, and cut it into the desired length.

5.Anchor the other side with covering to the gauge and strip the covering.

6.Bend the part that got stripped of covering by 90 degree.

7.And complete!

Features

The gauge has a graduation with 2.54mm pitch in order to cut the wire precisely.

The pair of ditches to bend the legs on an IC inward, and the holes that make it much easier to bend a short wire.

Even on the back of the tool, there are some ditches to bend a resistance into desired length.

Specification

The gauge can be attached on a wire stripper with a blade that's 4mm or less in thickness, and 30mm or more in length.

Usage

You can cut the jacket to the same lengths;

You can cut the wiring to any length you like;

You can bend the lead even if it’s only short wide left;

You can bend the wiring to any length you like;

You can adjust the position of the legs on IC.

Most store-bought wire stripper can be fixturable;

Any further questions, please contact main[at]breadboardmaniac.com

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review