# WiFi Dongle for pcDuino

**Type:** Product page · **SKU:** DFR0242 · **Brand:** [DFRobot](https://core-electronics.com.au/brands/dfrobot-australia)
**Page:** https://core-electronics.com.au/wifi-dongle-for-pcduino.html ([markdown](https://core-electronics.com.au/wifi-dongle-for-pcduino.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

Introduction

 Want to free your pcDuino from the oppression of wired networking? This USB Wifi dongle has been tested to work with the pcDuino, simply plug it into the USB port and you're ready to connect to a nearby wireless network without installing any driver!    Wifi PcDuino is a WLAN module supporting IEEE 802.11 b/g/n standards with PH connector supporting USB 2.0 .This is a low cost compact WLAN module designed in the product with embedded system for the wireless connectivity.WIFI\_PCDUINO both support RT5370.WIFI\_PCDUINO WLAN Module is designed to operate in 2.4GHz ISM frequency band.      Specification 

- 1T1R mode with 150Mbps with PHY rates for both transmit and receiving
- Dynamic data rate: 
    - Maximum data rate up to 150Mbps
    - 11n: Legacy, Mixed and Green Field.
- Modes: 
    - 11g: 54/48/36/24/12/9/6 Mbps (Auto Sensing)
    - 11b:11/5.5/2/1 Mbps (Auto Sensing).
- Support 20MHz/40MHz Bandwidth
- Security support for 64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Reverse Direction Grant Data Flow and Frame Aggregation
- Cisco CCX Support
- USB2.0
- Operating Frequency: 2.412GHz~ 2.484GHz
- Transmit Output Power: 802.11g 15+/-1dBm
- Receive Sensitivity 11b: -78dBm @ 11Mbps (Typical)；11g: -68dBm @ 54Mpbs (Typical)
- Operating Voltage:3.3V
- Antenna Port Impedance:50ohm
 
   Operating System 

- Windows 2000/XP/VISTA/Win7
- Wince 5.0 & 6.0
- Linux 2.6.x
 
   Documents  

wifi\_pcduino

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/d/f/dfr0242.jpg)