2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

Rating:
100% of 100
SKU: ADA783 Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate...
$4.40 AUD, inc GST
$4.00 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 1st of Apr

Quantity Discounts:

  • 10-25 $3.84 (exc GST)
  • 25+ $3.72 (exc GST)

Restrictions apply to this equipment as it uses button/coin cell batteries:

  • The equipment is intended to be used in trades, professions or industries
  • The equipment is not intended for sale to the general public
  • The equipment is not intended to be used where children are present
  • You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
  • You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries

Button Battery Warning

A declaration of use will need to be submitted during checkout.

- +

56 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Warning: This product requires a button battery to operate which is hazardous to young children. Do not use this product for projects that are potentially accessible to young children.

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy to get, and fairly low cost. They tend to have about 220mAh capacity so this holder would give you 6V @ 220mAh with two cells.


The holder is made of plastic and snaps open and closed. There are holes for screws so it can be screwed shut (extra screws not included).

A nice extra is the on/off switch up top. Adafruit had the factory place a 2mm JST PH connector on the end but you can cut it off if you want to solder on a different connector.

This item does not include any 2032 coin cells. We do stock those separately, so if you want batteries to go with this, please pick up two of them!

Technical Details

  • Weight: 4.7 grams when empty, 10.5 grams with two 2032 batteries installed
  • Size: 53mm x 23mm x 6mm
  • 6" long (150mm) wires

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

E-Textiles / Wearables Compared: LilyPad vs GEMMA vs Microbit

Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...
Every good E-Textiles or Wearables project needs to start somewhere, and the natural starting point ...

How to Conserve Battery Life with IoT Projects

If you’ve ever created a project that uses batteries, you’ll be well aware how hard it c...
If you’ve ever created a project that uses batteries, you’ll be well aware how hard it c...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Choosing Your Next LiPo Battery

As technology gets smaller and more powerful, wearables and portable devices are becoming more commo...
As technology gets smaller and more powerful, wearables and portable devices are becoming more commo...

Projects

safePower

I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...
I like working with the Pi Zero W and Pi 4 as they are very compact, very powerful and very cheap fo...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.