# EC200U-EU C4-P01 Development Board Designed For QuecPython

**Type:** Product page · **SKU:** WS-27095 · **Brand:** [Waveshare](https://core-electronics.com.au/brands/waveshare-in-australia)
**Page:** https://core-electronics.com.au/waveshare-ec200u-eu-c4-p01-development-board-quecpython-lte-bluetooth-gnss.html ([markdown](https://core-electronics.com.au/waveshare-ec200u-eu-c4-p01-development-board-quecpython-lte-bluetooth-gnss.html.md))

EC200U-EU C4-P01 development board Designed for QuecPython, Multi-Mode & Multi-Band support, LTE Cat-1 / Bluetooth Communication, GNSS Positioning,...

## Pricing

- **Price:** $95.30 (inc GST) — $86.64 AUD, exc GST
- **Quantity discounts:** 6+ $83.17 (exc GST) · 12+ $80.57 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Aug 31 and Sep 07.

## Restrictions

**For use in Australia**

- Operate only in bands and with settings that are permitted for your location and application. Check this product’s supported frequencies in the description/specs.
- If you intend to operate outside shared/licence‑exempt conditions (e.g. in other bands, at higher power, with high‑gain antennas, or extended duty cycles), you must have the appropriate authorisation.
 
**For use in other regions**

- Follow the spectrum rules for your country/region and select frequencies and settings accordingly.

A declaration of use will need to be submitted during checkout.

## Description

The **EC200U-EU C4-P01** development board is equipped with **EC200U-EU LTE Cat 1** wireless communication module, with maximum data rate up to 10 Mbps downlink and 5 Mbps uplink, supports multi-mode & multi-band and is cost-effective. Designed in the compact and unified form factor, compatible with Quectel multi-mode LTE Standard EC20-CE. Onboard Type-C port for easy development with just a USB Type-C cable. Onboard 40PIN GPIO pin header which is compatible with most Raspberry Pi HATs.

- Equipped with EC200U-EU LTE Cat 1 wireless communication module, multi-mode & multi-band support
- Onboard 40PIN GPIO header, compatible with most Raspberry Pi HATs
- 5 LEDs for indicating module operating status
- Supports TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS protocols, etc.
- Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)
- Onboard Nano SIM card slot and eSIM card slot, dual card single standby
- Onboard MIPI connector for connecting MIPI screen and is fully compatible with Raspberry PI peripherals
- Onboard camera connector, supports customized SPI cameras with a maximum of 300,000 pixels
- Provides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and development
- Comes with online development resources and manual (example in QuecPython)
 
## 
Specifications

**Applicable Region**:

- Europe, Middle East, Africa, Australia, New Zealand, Brazil
 
**Frequency Band:**

- **LTE-FDD**: B1, B3, B5, B7, B8, B20, B28
- **LTE-TDD**: B38, B40, B41
- **GSM / GPRS / EDGE**: GSM: B2, B3, B5, B8
- **GNSS**: GPS, GLONASS, BDS, Galileo, QZSS
- **Bluetooth**: Bluetooth 4.2 (BR/EDR)
- **Wi-Fi Scan**: 2.4 GHz 11b (Rx)
 
**Data Transmission:**

- **CAT 1**: 
    - LTE-FDD: DL 10 Mbps; UL 5 Mbps
    - LTE-TDD: DL 8.96 Mbps; UL 3.1 Mbps
- **NB-IoT**: N/A
- **Cat-M**: N/A
- **GSM / GPRS / EDGE**: DL 85.6 Kbps; UL 85.6 Kbps
 
**Others:**

- **Type-C USB Port**: Supports AT commands testing, GNSS positioning, firmware upgrading, etc.
- **Communication Protocol**: TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMS
- **SIM Card**: Nano SIM and eSIM, dual card single standby
- **Indicator**: 
    - P01: Module Pin 1, default as EC200A-XX PWM0
    - P05: Module Pin 5, NET\_MODE indicator
    - SCK1: SIM1 detection indicator, lights up when SIM1 card is inserted
    - SCK2: SIM2 detection indicator, lights up when SIM2 card is inserted
    - PWR: Power indicator
- **Buttons**: 
    - PWK: Power ON/OFF
    - RST: Reset
    - BOOT: Forcing into firmware burning mode
    - USB ON/OFF: USB power consumption detection switch
- **Antenna Connectors**: LTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antenna
- **Operating Temperature**: -30 ~ 75°C
- **Storage Temperature**: -45 ~ 90°C
 
## What’s on board ![EC200U C4-P01 development board onboard components](https://core-electronics.com.au/attachments/localcontent/EC200U-EU-C4-P01-details-intro_38663d96bfa.jpg)

1. **EC200U module**
2. **PWR Power indicator**
3. **NET Network indicator**
4. **PWM function indicator**
5. **SIM1 indicator**
    lights up when SIM1 card is inserted
6. **SIM2 indicator**
    lights up when SIM2 card is inserted
7. **Power ON/OFF button**
8. **Reset button**
9. **BOOT button**
    Press before powering on to force firmware burning mode
10. **USB detection ON/OFF**
    Normally closed: USB can be connected normally;
    Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement
11. **Raspberry Pi GPIO Header**
    Compatible with Raspberry Pi HATs, for more details, please refer to Pinout Definition
12. **Power ON/OFF jumper**
    Connect: auto turn on, short press PWK button to restart
    Disconnect: short press PWK button to power on, long press to power off
13. **1.8V output jumper**
    Connect: outputs 1.8V externally
    Disconnect: used to test power consumption
14. **Module power supply jumper**
    Connect: DCDC to power the module
15. **SD power supply selection**
    Connect: enable SD power supply
16. **GNSS active power supply selection**
    Connect: enable GNSS active power supply
17. **SIM card slot 1**
    for Nano SIM card
18. **SIM card slot 2**
    for eSIM card
19. **SD card slot**
    Before using the SD card, enable SD power supply in the 10-Pin Header
20. **MIPI interface**
    Supports MIPI LCD and is fully compatible with Raspberry Pi peripherals
21. **Camera interface**
    Supports customized SPI cameras with a maximum of 300,000 pixels
22. **Reserved matrix keyboard pads**
    users can customize soldering or connection of the keyboard buttons (Note: the keyboard buttons are not included by default)
23. **USB Type-C port**
24. **ADC testing points**
    ADC0\_IN/ADC1\_IN ADC measurement interface
25. **LTE main antenna connector**
26. **GNSS antenna connector**
27. **DIV/Wi-Fi/Bluetooth antenna connector**
28. **MIC & SPK header**
 
## Pinout ![EC200U C4-P01 development board pinout definition](https://core-electronics.com.au/attachments/localcontent/EC200U-EU-C4-P01-details-inter_311240ff163.jpg)Dimensions ![EC200U C4-P01 development board outline dimensions](https://core-electronics.com.au/attachments/localcontent/EC200U-EU-C4-P01-details-size_2350222b588.jpg)

## Documents

- **Wiki**
- [Quectel Documentation](https://python.quectel.com/doc/Getting_started/en/evb/ec200x-evb.html)
 
## Shipping List

- 1 x EC200U-EU C4-P01

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/W/S/WS-27095-1.jpg)