# Waveshare 7inch QLED HDMI Display with Adapter Board (1024 × 600, Non-Touch)

**Type:** Product page · **SKU:** WS-22682 · **Brand:** [Waveshare](https://core-electronics.com.au/brands/waveshare-in-australia)
**Page:** https://core-electronics.com.au/waveshare-7inch-qled-hdmi-display-with-adapter-board-1024-600-non-touch.html ([markdown](https://core-electronics.com.au/waveshare-7inch-qled-hdmi-display-with-adapter-board-1024-600-non-touch.html.md))

A 3.5 mm-thick 1024 × 600 QLED panel covering 78% of NTSC colour, made for slim enclosures, control panels and embedded builds.

## Pricing

- **Price:** $87.49 (inc GST) — $79.54 AUD, exc GST

## Availability & dispatch

- Available with a lead time — expect dispatch between Nov 23 and Nov 30.

## Description

A 7-inch, 1024 × 600 QLED display that takes HDMI video, power and control signals over a single 40-pin FPC cable. It comes with an adapter board and cables, so you can run it from a Raspberry Pi, Jetson Nano or Windows PC.

The driver circuit sits on the flexible cable behind the panel (a chip-on-film design), so the whole module is only 3.5 mm thick. The QLED panel covers 78% of the NTSC colour space and 92% of sRGB at 350 cd/m², a wider colour range than the 45% NTSC of the IPS version of this screen.

The adapter board turns a full-size HDMI input and a USB-C power input into the panel's FPC connection. Its header exposes 5 V in, 3.3 V out, ground, and backlight enable and PWM pins for dimming from your own hardware. Use the adapter board for first power-up and testing. Once your project is proven, the published adapter schematic lets you design your own carrier or route the 40-pin FPC directly into your own PCB.

It works with any Windows, Linux or Android board that has an HDMI output. The Waveshare wiki covers setup for Windows 7 to 11, Raspberry Pi OS, Ubuntu, Kali and RetroPie. A few limits to know: this version has no touch input; it needs a 5 V supply of at least 500 mA, and a weak USB port can make the screen flicker (a 5 V 1 A supply fixes it); and the display shouldn't be connected or disconnected while powered.

### Features

- Fits slim cases and panel cut-outs, because the driver circuit is mounted on the FPC instead of on a board behind the panel
- Shows web and photo content close to its intended colour, covering 92% of the sRGB colour space
- Holds its colour through long installations, rated by Waveshare for up to 60,000 hours without colour degradation
- Readable from off-axis positions with a 170° viewing angle and 350 cd/m² brightness
- Simpler wiring in embedded builds, because one 40-pin FPC carries HDMI signals, power and backlight control
- Dim the screen or cut power use with PWM backlight control: 0–3.3 V on the adapter's PWM pin, with 0 V the brightest
- Connects to any board or PC with an HDMI output through the adapter's full-size HDMI port, and the included micro HDMI adapter suits boards with a micro HDMI port, such as Raspberry Pi 4 and 5 (changing the resolution in config.txt is required)
- Runs from a 5 V 1 A supply, with a rated power draw of 2.15 W

### Specifications: 7-inch QLED HDMI Display (Non-Touch)

| Property | Specification |
|---|---|
| Display Size | 7-inch |
| Panel | QLED |
| Resolution | 1024 × 600 |
| Touch | None (non-touch version) |
| Viewing Angle | 170° |
| Colour Gamut | 78% NTSC, 92% sRGB |
| Brightness | 350 cd/m² |
| Contrast | 800:1 |
| Colour Depth | 16.7M colours |
| Refresh Rate | 60 Hz |
| Active Area | 154.21 × 85.92 mm |
| Pixel Pitch | 0.1506 × 0.1432 mm |
| Module Dimensions | 164 × 97 × 3.5 mm |
| Panel Weight | 106 g |
| Display Interface | 40-pin FPC, 0.5 mm pitch (HDMI TMDS, power, I2C/DDC, CEC, HPD, USB, backlight EN/PWM) |
| Backlight Control | PWM, 0–3.3 V (0 V brightest, 3.3 V darkest) |
| Adapter Board | Full-size HDMI input, USB-C, 40-pin FPC connector; header with 5 V, 3.3 V, GND, EN, PWM |
| Input Voltage | 5 V (4.75–5.25 V) |
| Supply Current | 500 mA minimum (less causes startup failure or abnormal display) |
| 3.3 V Output | 200 mA max |
| Power Consumption | 2.15 W |
| Operating Temperature | −10 °C to 70 °C |
| Storage Temperature | −20 °C to 80 °C |
| Operating Humidity | 10–90% RH |

### Resources

- [Waveshare Wiki](https://www.waveshare.com/wiki/70H-1024600) (setup, pinout, EDID timing, adapter board schematic, dimension and 3D drawings)

### What's Included

- 1x 7-inch QLED display
- 1x 40-pin FPC cable (approx. 15 cm)
- 1x HDMI adapter board
- 1x HDMI cable (full-size to full-size)
- 1x USB-A to USB-C cable
- 1x HDMI to micro HDMI adapter

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/W/S/WS-22682_ecommerce_1794196752809.jpg)