# Waveshare 4G HAT for Raspberry Pi (LTE Cat-4/4G/3G/2G/GNSS)

**Type:** Product page · **SKU:** WS-17372 · **Brand:** [Waveshare](https://core-electronics.com.au/brands/waveshare-in-australia)
**Page:** https://core-electronics.com.au/waveshare-4g-hat-for-raspberry-pi-lte-cat-4-4g-3g-2g-gnss.html ([markdown](https://core-electronics.com.au/waveshare-4g-hat-for-raspberry-pi-lte-cat-4-4g-3g-2g-gnss.html.md))

Enable LTE Cat-4 4G/3G/2G communication and GNSS Positioning for your Raspberry Pi

## Pricing

- **Price:** $139.95 (inc GST) — $127.23 AUD, exc GST
- **Quantity discounts:** 5+ $122.14 (exc GST) · 10+ $118.32 (exc GST)

## Availability & dispatch

- In stock, ships same business day if ordered before 2PM (Australia/Sydney).
- We can dispatch 14 today, and up to 300 more in 12–19 days.

## Description

The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer, with low power consumption considering its performance.

You can connect this 4G module to a PC for mobile internet access, or attach it onto Raspberry Pi for more embedded activities like making phone calls, sending SMSs, global positioning, etc.

Check out [our guide for using this board with the Raspberry Pi](https://core-electronics.com.au/guides/raspberry-pi-4g-gps-hat/)!

## Specifications

- **Communication Support**
    
    
    - Dial-up, Telephone call, SMS, TCP/UDP, DTMF, HTTP, FTP
- **Interfaces and Connectors**
    
    
    - Onboard USB interface for testing AT Commands and obtaining GPS positioning data
    - Onboard CP2102 USB to UART converter
    - SIM card slot supporting 1.8V and 3V SIM cards
    - SD card slot for data storage
    - Onboard audio jack and audio decoder for making telephone calls
- **Communication Parameters**
    
    
    - Baudrate: 300bps to 4Mbps (default: 115200bps)
    - Autobauding baudrate: 9600bps to 115200bps
- **Control and Command**
    
    
    - Controlled via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
    - Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
 
- **Frequency Band**
    
    
    - **LTE Cat-4**
        - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
        - LTE-TDD: B34, B38, B39, B40, B41
    - **3G**
        - UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
    - **2G**
        - GSM/GPRS/EDGE: 850/900/1800/1900 MHz
- **GNSS**
    
    
    - **Satellite Systems**: GPS, Beidou, GLONASS, GALILEO, QZSS
    - **Receiver Type**
        - 16-channel
        - C/A Code
    - **Sensitivity**
        - GPS: -159 dBm
        - GLONASS: -158 dBm
        - BeiDou: TBD
        - Cold starts: -148 dBm
    - **Time-To-First-Fix (Open Air)**
        - Cold starts: <35s
        - Hot starts: <1s
- **SMS and Audio**
    
    
    - **SMS**
        - Supported Types: MT, MO, CB, Text, PDU
        - Storage: USIM card and ME (default)
    - **Audio Feature**
        - Supports echo cancellation
        - Supports noise reduction
- **Other**
    
    
    - **Power Supply**: 5V
    - **Operating Voltage**: 5V / 3.3V (configured via jumper)
    - **Operating Temperature**: -30°C ~ 80°C
    - **Storage Temperature**: -45°C ~ 90°C
 
## What's on Board

![](https://core-electronics.com.au/media/wysiwyg/SIM7600G-H-4G-HAT-details-intro.jpg)

1. SIM7600G-H
2. CP2102 USB to UART converter
3. NAU8810 audio decoder
4. TXS0108EPWR voltage translator

- translates 3.3V/5V into 1.8V
 
11. MP2128DT power chip
12. MP1482 power chip
13. Raspberry Pi GPIO header
14. SIM7600 control interface
- for connecting with host boards like Arduino/STM32
 
16. SIM card slot
- supports 1.8V/3V SIM card
 
18. TF card slot
- allows data storage like files, messages, etc.
 
20. 3.5mm earphone/mic jack
21. USB interface
- for testing AT Commands, getting GPS positioning data, etc.
 
23. USB to UART interface
- for serial debugging, or login to Raspberry Pi
 
25. MAIN antenna connector
26. AUX antenna connector
27. GNSS antenna connector
28. Power switch
29. Network status indicator
30. Power indicator
31. Operating voltage selection jumper
- configured via 0Ω resistor jumper
- VCCIO - 3.3V: set operating voltage as 3.3V
- VCCIO - 5V: set operating voltage as 5V
 
33. UART selection jumper
- A: access Raspberry Pi via USB to UART
- B: control the SIM7600 by Raspberry Pi
- C: control the SIM7600 via USB to UART
 
35. PWR configuration jumper
- PWR - 3V3: auto startup on power-up (default)
- PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
 
37. Flight mode configuration jumper
- NC by default, no flight mode control pin
- Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
 
39. USB connector solder pads
40. BOOT forced programming solder pads
## Pinout

**![](https://core-electronics.com.au/media/wysiwyg/product_images/SIM7600G-H-4G-HAT-details-inter.jpg)**

## **Dimensions**

**![](https://core-electronics.com.au/media/wysiwyg/product_images/SIM7600G-H-4G-HAT-details-size.jpg)**

## Resources

- [Datasheets and Usage Instructions](https://www.waveshare.com/wiki/SIM7600E-H_4G_HAT)
- [Wiki](https://www.waveshare.com/wiki/SIM7600E-H_4G_HAT#Overview)
 
## Shipping List

- 1 x SIM7600G-H 4G HAT
- 2 x USB A to micro-B cable (1 long, 1 short)
- 1 x standoff and mounting kit
- 2 x uFL to SMA interface cables
- 1 x GPS antenna (shown in product images)
- 1 x LTE antenna (shown in product images)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/1/_/1_5_5.jpg)