# Teensy Header Kit

**Type:** Product page · **SKU:** PRT-13925 · **Brand:** [Sparkfun](https://core-electronics.com.au/brands/sparkfun-australia)
**Page:** https://core-electronics.com.au/teensy-header-kit.html ([markdown](https://core-electronics.com.au/teensy-header-kit.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: Teensy Headers.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/Teensy%20Headers

## Description

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 14-pin, one 5-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!

Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.

Includes:

- 2x 13-pin stackable header
- 1x 7-pin female header (for pins on end)
- 1x 3-pin header (for 3-off grid holes)
- 1x 2x7 right-angle SMT header, for the surface mount pads on the back of the Teensy 3.2

## Videos for this product

- [What are Teensy Boards](https://core-electronics.com.au/videos/what-are-teensy-boards)
- [Using Teensy with Arduino IDE](https://core-electronics.com.au/videos/using-teensy-with-arduino-ide)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/p/r/prt-13925.jpg)