# STEMMA Wired Tactile Push-Button Pack - 5 Color Pack

**Type:** Product page · **SKU:** ADA4431 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/stemma-wired-tactile-push-button-pack-5-color-pack.html ([markdown](https://core-electronics.com.au/stemma-wired-tactile-push-button-pack-5-color-pack.html.md))

Little clicky switches are standard input "buttons" on electronic projects. These are just like Adafruit's Colorful Round Tactile Button Switch Assortment, but already...

## Pricing

- **Price:** $17.15 (inc GST) — $15.59 AUD, exc GST
- **Quantity discounts:** 10+ $15.13 (exc GST) · 50+ $14.81 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Sep 11 and Sep 15.

## Description

Little clicky switches are standard input "buttons" on electronic projects. These are just like our [Colorful Round Tactile Button Switch Assortment](https://core-electronics.com.au/colorful-round-tactile-button-switch-assortment-15-pack.html), but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.

Each button comes with a candy-colored round cap snapped on. You get one of each color-- blue, white, yellow, red, and black.

Best of all, each button board comes with a JST-PH 2mm connector and a matching [JST PH 3-Pin to Male Header Cables - 200mm](https://core-electronics.com.au/jst-ph-3-pin-to-male-header-cable-200mm.html), so wiring up is a cinch. Simply plug the cable in, then use the black wire to connect to your microcontroller/microcomputer ground, white wire to the input signal pin and the red wire to your power pin (3V or 5V) if you want to have the pull-up resistor activated.

If you want to connect to something with [alligator clips use Adafruit's STEMMA to Gator cable](https://core-electronics.com.au/jst-ph-3-pin-plug-to-color-coded-alligator-clips-cable.html). To connect to something with a [STEMMA 3-pin connector already, use this cable](https://core-electronics.com.au/jst-ph-3-pin-plug-plug-cable-100mm-long.html).

Works great with any device that wants a switch - Arduino, CircuitPython, Raspberry Pi, DIY builds...etc!

### Technical Details

- Single button PCB: 28mm x 21mm x 14mm

 ![](https://core-electronics.com.au/attachments/localcontent/RoHS2_2011_65_EU_7356c5574c.svg)![](https://core-electronics.com.au/attachments/localcontent/RoHS2_2015_863_EU_86773f57f9.svg)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/4/4/4431-04.jpg)