# SHT30 Temperature And Humidity Sensor - Wired Enclosed Shell

**Type:** Product page · **SKU:** ADA5064 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/sht30-temperature-and-humidity-sensor-wired-enclosed-shell.html ([markdown](https://core-electronics.com.au/sht30-temperature-and-humidity-sensor-wired-enclosed-shell.html.md))

Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.

## Pricing

- **Price:** $18.45 (inc GST) — $16.77 AUD, exc GST
- **Quantity discounts:** 10+ $16.27 (exc GST) · 50+ $15.94 (exc GST)

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. [Unlike earlier SHT sensors](https://core-electronics.com.au/soil-temperature-moisture-sensor-sht10.html), this sensor has a true I2C interface.

The enclosed box is a Sensiron SHT-30 digital sensor ([much like Adafruit's breakout here](https://core-electronics.com.au/adafruit-sensiron-sht31-d-temperature-humidity-sensor-breakout.html) or this [weather-proof mesh sensor](https://core-electronics.com.au/sht-30-mesh-protected-weather-proof-temperature-humidity-sensor-1m-cable.html)) but with the 4 data/power wires brought out to bare wires. Any SHT-3x code for a microcontroller will work, Adafruit are big fans of this sensor. [Check out the tutorial for Arduino and CircuitPython/Python, and more!](https://learn.adafruit.com/adafruit-sht31-d-temperature-and-humidity-sensor-breakout)

The 1 meter long cable has four wires: Red = VCC (2.15-5VDC), Black = Ground, Yellow = I2C Clock, White = I2C Data.

Simply connect the red and black wires to your microcontroller or microcomputer power + ground. Connect the yellow wire to SCL, white wire to SDA of your controller's I2C port. There are built in 10K resistors so you don't need external I2C pull-ups.

Compared to the [DHT22/AM2302](https://core-electronics.com.au/am2302-wired-dht22-temperature-humidity-sensor.html), this sensor is more precise, more accurate, works in a bigger range of temperature/humidity and is less expensive! Adafruit strongly recommend using this instead of DHT sensors, they are very annoying to use and this sensor is a true I2C sensor so it is universally supportable.

[Adafruit have an Adafruit Learning System guide Arduino & CircuitPython code, datasheets and more for SHT3x sensors!](https://learn.adafruit.com/adafruit-sht31-d-temperature-and-humidity-sensor-breakout)

**Technical Specifications**

- Sensor module dimensions: 59mm x 26.3mm x 13.4mm
- Wire length: ~22.8cm / ~9"
- Power: 2.15~5.5V
- Humidity: 0~100%RH
- Temperature: -40~125ºC
- Precision: +/- 2%RH ~ +/- 0.2ºC
- Output: Digital IIC
- [Diagram](https://core-electronics.com.au/attachments/localcontent/5064_C16211_29883aa03b5.png)
- [Datasheet](https://core-electronics.com.au/attachments/localcontent/5064_Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital_941853d284f.pdf)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/5/0/5064-00.jpg)