empowering creative people

  1. Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V POLOLU-2598 Pololu Australia

    Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V

    SKU: POLOLU-2598
    Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. Learn More
    $11.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 6th of Mar

    $11.26 AUD

  2. Magnetic Encoder Disc for Micro Metal Gearmotors, 12 CPR (Bulk) POLOLU-2599 Pololu Australia

    Magnetic Encoder Disc for Micro Metal Gearmotors, 12 CPR (Bulk)

    SKU: POLOLU-2599
    These magnetic discs can be used with Pololu's micro metal gearmotors with extended motor shafts as part of a quadrature encoder system that offers 12 counts per revolution. Appropriate Hall Effect sensors, such as those in Pololu's magnetic encoder pair kits, are required to complete the system. These discs are bulk-packaged and must be ordered in multiples of five. Pololu will package these to order and generally expect orders of up to a few hundred units to ship within a day. Learn More
    $0.95 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 27th of Feb

    $0.95 AUD

  3. Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V POLOLU-2591 Pololu Australia

    Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V

    SKU: POLOLU-2591
    Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 3.3 V. Learn More
    $11.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 6th of Mar

    $11.26 AUD

  4. Pololu 42x19mm Wheel and Encoder Set POLOLU-1218 Pololu Australia

    Pololu 42x19mm Wheel and Encoder Set

    SKU: POLOLU-1218
    This set includes a pair of 42×19mm wheels, a pair of extended brackets, and two matching encoders. Just pick a pair of micro metal gearmotors to complete your feedback-enabled drive system. Learn More
    $50.21 AUD, inc GST
    AUD, inc GST
    $50.21 AUD
  5. Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V POLOLU-2590 Pololu Australia

    Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V

    SKU: POLOLU-2590
    Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels. The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap. The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution. This version is intended for use at 5 V. Learn More
    $11.26 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 27th of Feb

    $11.26 AUD

  6. Encoder for Pololu Wheel 42x19mm POLOLU-1217 Pololu Australia

    Encoder for Pololu Wheel 42x19mm

    SKU: POLOLU-1217
    This quadrature encoder works with Pololu's micro metal gearmotors, 42×19mm wheel, and extended bracket to measure the rotation speed and direction of the wheel. With twelve teeth on the wheel, the system provides a resolution of 48 counts per revolution, which corresponds to a linear resolution of just under 3 mm or 1/8". Learn More
    $18.82 AUD, inc GST
    AUD, inc GST
    $18.82 AUD

Set Ascending Direction

6 Item(s)