empowering creative people

Search in: Products

Search results for jumper cable (58 products)

Found what you want? Yes/ No
  1. Breadboard Jumper Cables High Quality (30 Pack) FIT0154 DFRobot Australia - Express Post Australia Wide

    Breadboard Jumper Cables High Quality (30 Pack)

    SKU: FIT0154
    | Brand: DFRobot
    This is a DFRobot exclusive! This is a high quality jumper cable. Hand made with 22AWG multistrand wire and sturdy male pins. Each jumper cable has an approximate 210mm lenght.Each pack comes with ten jumper cables(different colors available). Learn More
    $6.57 AUD, inc GST
    AUD, inc GST

    $6.57 AUD

  2. Jumper Wires 7.8" F/M (High Quality 30 Pack) FIT0365 DFRobot Australia - Express Post Australia Wide

    Jumper Wires 7.8" F/M (High Quality 30 Pack)

    SKU: FIT0365
    | Brand: DFRobot
    Premium jumper cables for prototyping. Made with 26AWG multistrand wire and sturdy male pins. Each jumper cable is approximately 210mm in lenght. Each pack comes with 30 jumper cables (different colors available). Learn More
    $6.45 AUD, inc GST
    AUD, inc GST

    $6.45 AUD

  3. Qwiic Cable - Female Jumper (4-pin) CAB-14988 Sparkfun Australia - Express Delivery Australia Wide

    Qwiic Cable - Female Jumper (4-pin)

    SKU: CAB-14988
    | Brand: Sparkfun
    This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy .. read more Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  4. Qwiic Cable - Breadboard Jumper (4-pin) PRT-14425 Sparkfun Australia - Express Delivery Australia Wide

    Qwiic Cable - Breadboard Jumper (4-pin)

    SKU: PRT-14425
    | Brand: Sparkfun
    This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes .. read more Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  5. Jumper Wire - 0.1", 3-pin, 6" (Black, Red, White) PRT-13164 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 3-pin, 6" (Black, Red, White)

    SKU: PRT-13164
    | Brand: Sparkfun
    This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black, red, and white cables. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  6. Jumper Wire - 0.1", 6-pin, 12" PRT-10376 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 6-pin, 12"

    SKU: PRT-10376
    | Brand: Sparkfun
    This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Learn More
    $2.48 AUD, inc GST As low as: $2.23
    AUD, inc GST

    $2.48 AUD

  7. Jumper Wire - 0.1", 5-pin, 12" PRT-10375 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 5-pin, 12"

    SKU: PRT-10375
    | Brand: Sparkfun
    This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Learn More
    $2.48 AUD, inc GST As low as: $2.23
    AUD, inc GST

    $2.48 AUD

  8. Jumper Wire - 0.1", 4-pin, 12" PRT-10374 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 4-pin, 12"

    SKU: PRT-10374
    | Brand: Sparkfun
    This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Learn More
    $2.48 AUD, inc GST As low as: $2.23
    AUD, inc GST

    $2.48 AUD

  9. Jumper Wire - 0.1", 3-pin, 12" PRT-10373 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 3-pin, 12"

    SKU: PRT-10373
    | Brand: Sparkfun
    This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Learn More
    $2.48 AUD, inc GST As low as: $2.23
    AUD, inc GST

    $2.48 AUD

  10. Jumper Wire - 0.1", 2-pin, 12" PRT-10372 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - 0.1", 2-pin, 12"

    SKU: PRT-10372
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Learn More
    $2.48 AUD, inc GST As low as: $2.23
    AUD, inc GST

    $2.48 AUD

  11. JST Jumper 4 Wire Assembly PRT-09916 Sparkfun Australia - Express Delivery Australia Wide

    JST Jumper 4 Wire Assembly

    SKU: PRT-09916
    | Brand: Sparkfun
    This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  12. JST SH Jumper 6 Wire Assembly - 8" PRT-10361 Sparkfun Australia - Express Delivery Australia Wide

    JST SH Jumper 6 Wire Assembly - 8"

    SKU: PRT-10361
    | Brand: Sparkfun
    This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  13. JST SH Jumper 4 Wire Assembly - 8" PRT-10359 Sparkfun Australia - Express Delivery Australia Wide

    JST SH Jumper 4 Wire Assembly - 8"

    SKU: PRT-10359
    | Brand: Sparkfun
    This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socket. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  14. 6-conductor 0.1 socket-socket cable - 6 long ADA206 Adafruit in Australia - Express Delivery Australia Wide

    6-conductor 0.1 socket-socket cable - 6 long

    SKU: ADA206
    | Brand: Adafruit
    6" (150mm) long jumper cable of 6 conductors, 0.1" spacing with two 'female'/sockets on either end. Great for wiring up ShiftBrites together! Learn More
    $3.32 AUD, inc GST
    AUD, inc GST

    $3.32 AUD

  15. Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per PAck) (Seeed Studio) SS110990028 Seeed Studio Products - In Stock - In Australia

    Grove - 4 pin Female Jumper to Grove 4 pin Conversion Cable (5 PCs per PAck) (Seeed Studio)

    SKU: SS110990028
    | Brand: Seeed Studio
    4 pin Female Jumper to Grove 4 pin Conversion Cable is being made available based on requests from customers to use Grove modules directly with Arduino. .. read more Learn More
    $6.52 AUD, inc GST
    AUD, inc GST

    $6.52 AUD

  16. Solderless Breadboard Jumper Cable Wires (75 Pieces) CE00301 Core Electronics Products - In Stock - In Australia

    Solderless Breadboard Jumper Cable Wires (75 Pieces)

    SKU: CE00301
    These jumper wires feature a male pin at each end which is perfect for connecting different points of the breadboard together. Learn More
    $5.95 AUD, inc GST As low as: $4.00
    AUD, inc GST

    $5.95 AUD

  17. Solderless Breadboard Jumper Cable Wires (Female-Female 40 Pieces) CE05098
    $4.75 AUD, inc GST
    AUD, inc GST

    $4.75 AUD

  18. Jumper Wire - JST to Molex PRT-08598 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - JST to Molex

    SKU: PRT-08598
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, 2-pin Molex 0.1" pitch polarized connector on the opposite end. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST
    $2.22 AUD
  19. Jumper Wire - JST to Female Connector PRT-08599 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - JST to Female Connector

    SKU: PRT-08599
    | Brand: Sparkfun
    This is a simple two wire cable. One end has a 2 pin female 0.1" pitch connector. Opposite end has 2-pin JST connector. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  20. JST Jumper 2 Wire Assembly PRT-09914 Sparkfun Australia - Express Delivery Australia Wide

    JST Jumper 2 Wire Assembly

    SKU: PRT-09914
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Learn More
    $1.23 AUD, inc GST As low as: $1.11
    AUD, inc GST

    $1.23 AUD

  21. JST Jumper 3 Wire Assembly PRT-09915 Sparkfun Australia - Express Delivery Australia Wide

    JST Jumper 3 Wire Assembly

    SKU: PRT-09915
    | Brand: Sparkfun
    This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Learn More
    $2.22 AUD, inc GST
    AUD, inc GST

    $2.22 AUD

  22. Molex Jumper 6 Wire Assembly PRT-09922 Sparkfun Australia - Express Delivery Australia Wide

    Molex Jumper 6 Wire Assembly

    SKU: PRT-09922
    | Brand: Sparkfun
    This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end. It also comes with the mating connector for the Molex. Learn More
    $3.25 AUD, inc GST
    AUD, inc GST

    $3.25 AUD

  23. Molex Jumper 2 Wire Assembly PRT-09918 Sparkfun Australia - Express Delivery Australia Wide

    Molex Jumper 2 Wire Assembly

    SKU: PRT-09918
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end, bare cable on the opposite end. It also comes with the mating connector for the Molex. Learn More
    $1.23 AUD, inc GST As low as: $1.11
    AUD, inc GST

    $1.23 AUD

  24. Jumper Wire - JST Black Blue PRT-08671 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - JST Black Blue

    SKU: PRT-08671
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Learn More
    $1.23 AUD, inc GST As low as: $1.11
    AUD, inc GST

    $1.23 AUD

  25. Jumper Wire - JST Black Red PRT-08670 Sparkfun Australia - Express Delivery Australia Wide

    Jumper Wire - JST Black Red

    SKU: PRT-08670
    | Brand: Sparkfun
    This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Learn More
    $1.23 AUD, inc GST As low as: $1.11
    AUD, inc GST

    $1.23 AUD

1-25 of 58

Page:
  1. 1
  2. 2
  3. 3

You might also be interested with:

Tutorialsshow all tagged composite display dsi hdmi lcd monitor pi

  1. How to Use a LCD Screen/Display with Raspberry Pi

    What fun would a computer be without a screen to see what you’re doing? Well if you own a Raspberry Pi and are curious about the different ways you can connect an external display or monitor up to it, then look no further. Today we’ll be ...

    tags: composite display dsi hdmi lcd monitor pi raspberry screen

  2. How to Build Internet-Connected Electronics Projects

    What do we mean when we talk about the "Internet of Things"? Mostly we're talking about tiny computers that have access to the internet and do some useful work. Unlike the computers we're used to holding in our hands, they don't have a touchscreen an...

    tags: expansion board internet of things iot micropython pycom wipy workshop

  3. Getting started with your Onion Omega2/2+

    In this tutorial we will learn how to set up the Onion Omega2/Omega2+ for the first time. You will require the following: Onion Omega2 or Omega2+ An Onion Omega2 Dock, such as: An Onion Omega2 dock, eg. Power Dock or Breadboard Do...

    tags: omega omega2 onion setup

  4. Onion Omega - First Time Setup Using the Command Line

    In this tutorial, we will learn how to set up the Onion Omega2/Omega2+ for the first time using the command line.  While the Omega2/2+ has a graphical setup wizard and a web-based GUI called the "Console,"  we have found both to be suscept...

    tags:

  5. Remote 3D Printing with OctoPi

    Remote control of your 3D printer is a particularly appealing concept, especially if you've been forced into printing via USB in the past. Using your new 3D printer should be as simple as plugging it in, uploading some G-Code and pressing 'Print'. Ho...

    tags: octopi octoprint printer host raspberry pi

  6. Programming with USB-Serial Converters

    Thanks to huge advancements in technology over the last decade, the maker community that we know and love has thrived. It’s now easier than ever before to get started with programming and tinkering due to the innovation from brands such as Ardu...

    tags: arduino converter ftdi programming serial ttl usb

  7. Pycom GPy Getting Started

    The main thing I want you to get out of this project is this: upon completion you will have cellular data connected to your Internet of Things device! LoRa, Sigfox, Bluetooth and WiFi can't compete with cellular data for coverage, speed and...

    tags: cat-m1 cellular expansion board 3.0 fipy gpy iot lte pycom

  8. Internet of Things with Pycom and Adafruit IO - From Zero to Hero

    Introduction We’re going from zero to hero. Starting from nothing we’ll get a WiPy communicating with Adafruit IO, an IoT service out on the Internet. We’ll be able to send data from the device to the cloud and control the device f...

    tags: adafruit io internet of things iot pycom wipi

  9. Choosing the Right Raspberry Pi Kit

    Show of hands, who loves Raspberry Pi? We all do, and one of the most common questions we get asked is which Raspberry Pi kit is going to best suit my project, which one has the right components in it etc. So today we’re going to be looking at ...

    tags: kits pi raspberry

  10. "Hello World" with Raspberry Pi 3

    Today we’re going to take a look at how to get started and setup that fancy Raspberry Pi you’ve just bought. If you’re still not sure exactly how the Raspberry Pi works, or what it can do, check out ‘What is a Raspberry Pi?&rs...

    tags: beginner raspberry pi

Projectsshow all tagged coffee avr atmega328p oled ssd1306 arduino lcd

  1. grinder_timer

    Making a dumb coffee grinder slightly less dumb. This is a programmable timer tethered to a Rancilio Rocky coffee grinder. The Rocky is a "dumb" grinder and electrically very simple. Basically it's an ac motor with an on/off switch and a momentary push-button to grind. This project adds an electronic timer so that repeatable grind quantities can be produced without having to stand over the grinder. Features: - Four programmable ...

    tags: coffee avr atmega328p oled ssd1306

  2. FM Radio with Arduino, LCD and Si4703

    A couple of years ago, I found a modern jukebox (with iPod connectivity, AM/FM radio, CD player and LEDs) dumped in my street. The body was in decent condition but all of the electronics were ruined apart from the LEDs. I decided to take it and replace all of the electronics with my own and add a few cool features. One of the parts of the larger project was to make an FM radio with an LCD and pushbuttons to control the frequency ...

    tags: arduino lcd si4703 radio fm radio pushbuttons

  3. Concrete Lamp

    Welcome to my project on how to make a very stylish lamp out of a potentially un-stylish material - concrete! To be honest, style (or rather beauty) is in the eye of the beholder and so I'll leave it up to you to decide if it fits in your surroundings or not. What do you think? All the necessary steps are here but if you don't like reading the just sit back, relax and watch the video instead. When I said to people at work that I...

    tags: concrete 3d 3d print lamp

  4. IoT Chicken Shed (Arduino, Wifi)

    If you have chickens and find you're not always available to close the gate at night or check the water levels each day, then why not use an ESP8266 to automate your chicken door and receive alerts door status and low water level, as well as allow you to remotely control the door from anywhere over the internet. ...

    tags: arduino wifi chicken coup shed iot esp8266

  5. RetroPie in a Cartridge

    For $50 and some dedication a retro gaming console can be yours and with HDMI you can play it with any modern TV or monitor. Instead of using bulky and space taking cartridges and discs it's all on the console. For this build, we're going to use Retropie, an awesome software package that handles all your emulation needs with inbuilt Bluetooth and wireless needs. Any Pi can run RetroPie, but I recommend using the Raspberry Pi Ze...

    tags: retro pie retropie raspberry pi zero w

  6. Garage Door Sensor

    This project uses a US100 ultrasonic distance sensor to detect instances of a garage tilt door being left open and sends an alert via the IFTTT mobile app. Additionally, the device logs temperature and pressure to a Thingspeak channel using a BMP280 sensor....

    tags: arduino esp8266 bmp280 ifttt webhooks us100

  7. A Back to the Future Clock

    This project started life as an alarm clock for my son made to look like the time circuit from the Back to the Future movies. The display can show the time in various formats, including the one from the movies of course. It's configurable via the buttons on top of the enclosure but also via a web page served by the Raspberry Pi Zero inside. In one of the display modes it will show the local weather (from my Arduino-powered weathe...

    tags: raspberry pi raspberry pi zero clock led audio

  8. Modify Dell multimedia keyboard from USB bus power

    This project is to modify a Dell multimedia keyboard into a Raspberry Pi Zero dedicated keyboard with external powered USB hub. You can find this article in my blog http://sizeofinfinity.blogspot.com.au/2017/06/modify-dell-multimedia-keyboard-from.html....

    tags: bus powered usb keyboard pi zero

  9. Time lapsing in OctoPrint (Properly!)

    Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosure, I'm just about ready to turn on some serious 3D printing work. But before I dive into that endless pool of fun, it's a good time to take 5 minutes and set up our Taz 6 and it's OctoPrint Server with a bed-mounted camera and light system. That way I can monitor my prints from the other side of the warehouse using OctoPrint, and m...

    tags: pi camera octopi timelapse led strips 3d printing

  10. Wefted Waveforms

    This project aims to fuse neopixel strips with papier mache and origami into a free-standing electro-sculpture. The freestanding structure is formed from wire mesh and papier mache. It is then painted and wired up with strips of LEDs connected to an RPi3+Teensy+OctoWS2811 Adapter + Power Supply. The entire LED covered surface is then covered in a diffuser created from modular origami elements glued together. Finally, some VJ sof...

    tags: raspberry pi 3 b teensy 3.6 octows2811 adapter