Search results for: '9110'
- L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAhSKU: ADA4489 Brand: AdafruitRun two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's...
- Breakout Board for Thumb JoystickSKU: BOB-09110 Brand: SparkfunThis is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
- Plastic Grommet (14-1) - 12 PackSKU: GB-2911-0014-0001 Brand: goBildaThis plastic locking grommet is made specifically for a 14mm hole in a 2.5mm thick part. The grommets snap in place with the wings which.....
- Rubber Grommet (14-2) - 12 PackSKU: GB-2911-0014-0002 Brand: goBildaRubber grommets insulate otherwise sharp edges to protect wires and cables from chafing. These grommets can double as a vibration damping.....
- 1911 Series Servo Shaft (25 Tooth Spline, 10mm Shaft Diameter, 36mm Length)SKU: GB-1911-0025-1036 Brand: goBildaAttaching a round shaft to a servo spline unlocks many possibilities. The shaft is able to slide through a 10mm
- 1911 Series Servo Shaft (24 Tooth Spline, 10mm Shaft Diameter, 36mm Length)SKU: GB-1911-0024-1036 Brand: goBildaAttaching a round shaft to a servo spline unlocks many possibilities. The shaft is able to slide through a 10mm
- IP68 Waterproof 5-pin Aviation Connector/Cable Plug SPI1310/PSKU: SS320991108 Brand: Seeed StudioIP68 Waterproof 5-pin Aviation Connector/Cable Plug SPI1310/P...
- Graphic LCD 84x48 - Nokia 5110SKU: LCD-10168 Brand: SparkfunThe Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB.$17.60 AUD, inc GSTAs low as $16.72 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- Ultimaker Transparent PC 750g 3mmSKU: CE06298 Brand: UltimakerWith Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 ºC.
- Ultimaker Black PC 750g 3mmSKU: CE06299 Brand: UltimakerWith Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 ºC.
- Ultimaker White PC 750g 3mmSKU: CE06300 Brand: UltimakerWith Ultimaker PC (polycarbonate) filament, you can print strong and tough parts that retain dimensional stability when subjected to temperatures as high as 110 ºC.
- DJI FPV Goggles BatterySKU: CE07734 Brand: DJIThe portable DJI FPV Goggles Battery can charge the DJI FPV Goggles. It comes with a real-time battery level indicator (when being used with the DJI FPV Drone) for DJI FPV Goggles V2. When fully charged, it can provide up to 110 minutes of battery life for the DJI FPV Goggles V2.$49.00 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- Load Sensor - 50kgSKU: SEN-10245 Brand: SparkfunThis load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.
- Concentric LACT6-12V-20 Linear Actuator: 6" Stroke, 12V, 0.5"/sSKU: POLOLU-2306 Brand: PololuThis 12 V linear actuator can be used in a variety of heavy-duty applications. The motor has 20:1 reduction gearbox that gives the actuator a dynamic load rating of 110 lbs (50 kg) and a maximum speed of 0.5 in/s (1.3 cm/s), and it is rated to withstand up to 500 lbs when not moving. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 6-inch stroke and no potentiometer.
- Concentric LACT2P-12V-20 Linear Actuator with Feedback: 2" Stroke, 12V, 0.5"/sSKU: POLOLU-2303 Brand: PololuThis 12 V linear actuator can be used in a variety of heavy-duty applications. The motor has 20:1 reduction gearbox that gives the actuator a dynamic load rating of 110 lbs (50 kg) and a maximum speed of 0.5 in/s (1.3 cm/s), and it is rated to withstand up to 500 lbs when not moving. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 2-inch stroke and a built-in potentiometer for position feedback.$357.96 AUD, inc GSTAs low as $352.59 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- Concentric LACT6P-12V-20 Linear Actuator with Feedback: 6" Stroke, 12V, 0.5"/sSKU: POLOLU-2307 Brand: PololuThis 12 V linear actuator can be used in a variety of heavy-duty applications. The motor has 20:1 reduction gearbox that gives the actuator a dynamic load rating of 110 lbs (50 kg) and a maximum speed of 0.5 in/s (1.3 cm/s), and it is rated to withstand up to 500 lbs when not moving. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has a 6-inch stroke and a built-in potentiometer for position feedback.
- Concentric LACT8P-12V-20 Linear Actuator with Feedback: 8" Stroke, 12V, 0.5"/sSKU: POLOLU-2309 Brand: PololuThis 12 V linear actuator can be used in a variety of heavy-duty applications. The motor has 20:1 reduction gearbox that gives the actuator a dynamic load rating of 110 lbs (50 kg) and a maximum speed of 0.5 in/s (1.3 cm/s), and it is rated to withstand up to 500 lbs when not moving. Limit switches at each end make the actuator easy to control over its full range of motion, and the worm drive ensures that the shaft will hold its position even when unpowered. This version has an 8-inch stroke and a built-in potentiometer for position feedback.
Raspberry Pi: Where It Began
The Raspberry Pi as we know it today is just the “tip of the iceberg”, the product of more than a decade of development, spanning 4 generations with up-to 18 boards and counting released so far. Alongside this development, there...
Ubuntu on Raspberry Pi 4
Ubuntu 19.10 was recently released on 17 October 2019 and is powered by the all-new GNOME 3.34 and version 5.3 of the Linux kernel. This is for the benefit of users who do not know about Ubuntu! If you already know what is Ubuntu and its...
How To Make and Crimp Custom Connectors
The wires in our circuits are often forgotten when we are planning our next big project, but the right connectors will a make your project look more professional and a lot easier to work with! In this tutorial, we are going to have a quick ...
Using the Accelerometer with CircuitPython: Adafruit Circuit Playground Express
At the heart of every Adafruit Circuit Playground Express lies a three-axis accelerometer. This allows us to write programs that take the orientation of the board into account. We can detect orientation and acceleration on any axis. With Ci...
3D Printing Filament Guide
There are a wide range of filaments available in FDM 3D printing; it’s easy to get lost in all the abbreviations, acronyms, and temperatures. We’ve decided to bring together the most relevant information when selecting fila...
Our Siglent SDG1032X Arbitrary Function Generator Review
Let's take a look at the new Siglent SDG1032X Arbitrary function generator. We're looking at yet another example of the closing gap between hobbyist and pro gear - the growing feature set and capabilities of entry-level equipment continues ...
How to log measurements using a Mooshimeter
The Mooshimeter is one of our favorite multimeters here at Core Electronics! If you haven't heard about them before, then take a quick look at our review. One of the most popular features of the Mooshimeter is the ability to log voltag...
PiicoDev OLED Module SSD1306 - Micro:bit Guide
Let's get started with the PiicoDev® OLED Module SSD1306. In this guide, we'll connect the PiicoDev OLED to our Raspberry Pi Pico and get it working with some example code to display text, shapes, and animations. To f...
PiicoDev OLED Module SSD1306 - Raspberry Pi Pico Guide
Let's get started with the PiicoDev® OLED Module SSD1306. In this guide, we'll connect the PiicoDev OLED to our Raspberry Pi Pico and get it working with some example code to display text, shapes, and animations. To ...
PiicoDev OLED Module SSD1306 - Raspberry Pi Guide
Let's get started with the PiicoDev® OLED Module SSD1306. In this guide, we'll connect the PiicoDev OLED to our Raspberry Pi and get it working with some example code to display text, shapes, and animations. To follo...
Makerverse Nano Power Timer
Introduction The Makerverse Nano Power Timer is an ultra-low current consumption power controller designed to periodically turn on a battery powered microcontroller. It is perfect for maximising the battery life of data-logging sensor...
Detect Speed with a Raspberry Pi, Camera and OpenCV
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry Pi ‘Bullseye’ OS I highly recommend at this stage flashing and using the previous Raspberry Pi ‘Buster’ OS onto your Mi...
Layer Heights when Resin 3D Printing | Accurate 28mm Scale Models or Maximum Printer Output
Speed or Perfection? That choice is what an understanding of Layer Heights whenever Resin 3D printing is going to provide you. Any Traditional Resin 3D Printer worth its salt will let you print with Layer Heights between 10 Micron to 100 Mi...
Arduino Workshop for Beginners
Welcome to the Arduino Workshop, where you'll be able to follow our guided course which covers everything you'll need to know in order to create your own Arduino projects and become a leveled up maker. My name is Sam and along with being ...
mmPi-Pico HAT
I use a Raspberry Pi running EmonCms for collecting sensor data and controlling devices around the home but several things have been on my To-Do list to enhance its functionality. A Shutdown/Power Down/Startup circuit. Proportional fan...
Arduino Tide Gauge
I used an Arduino and a US-100 ultrasonic sensor to make an extremely low-cost tide gauge. This project measures the tide by sensing the distance to water using a US-100 ultrasonic sensor. The device has a 3D printed base&nb...
Ping Pong Launcher
I like to take on projects that give me an opportunity to learn new things. For this project, my two goals were to learn more about face detection algorithms and PID controllers but of course, there were so many more skills learned along th...
Raspberry Pi Desk Clock with Data Display
This project uses a Raspberry Pi and TFT display panel to provide a desk clock that also monitors our Home Solar and Battery system, and the weather, in one neat unit.
We recently installed a Solar Panel system and a Tesla Powerwall...
We recently installed a Solar Panel system and a Tesla Powerwall...
Roverling Mk.ⅠⅠ
Introduction
A few months back I created a basic mobile platform using parts from an old 3D printer. It was fun but not very practical. I designed Roverling Mark II so I could experi...
WhyzaGC - Feather ESP32 addon to the MightyOhm Gieger Counter
This project is about adding a wireless Adafruit Feather HUZZAH ESP8266 or ESP32 v2 with Adafruit Featherwing 128x64 OLED to interface with the self-assembled MightyOhm Geiger Kit.
Introduction
I am always on ...Introduction
I am always on ...
GraviTrack Enhancements - Lights and Sound
Introduction Searching for solar panels and related items on the Core Electronics website; I came across the Solarbotics GraviTrack Marble Machine Kit. I thought the kit would be a good educational tool for the grandkids. The kit was a hit...
Vehicle GPS Logger and Speedometer
Purpose
To display time and speed to a driver while logging timestamped raw latitude, longitude and speed as returned by the GPS satellite network. This allows a driver to double-check th...
Makers love reviews as much as you do, please follow this link to review the products you have purchased.