# RP2040 Stamp

**Type:** Product page · **SKU:** SP011 · **Brand:** [Pimoroni](https://core-electronics.com.au/brands/pimoroni-australia) · **GTIN:** 769894020791
**Page:** https://core-electronics.com.au/rp2040-stamp-1.html ([markdown](https://core-electronics.com.au/rp2040-stamp-1.html.md))

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST The RP2040...

## Pricing

- **Price:** $27.60 (inc GST) — $25.09 AUD, exc GST
- **Quantity discounts:** 10+ $24.09 (exc GST) · 25+ $23.34 (exc GST)

## Availability & dispatch

- Out of stock — the product page offers email notification when it returns.

## Description

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST

The RP2040 Stamp is a hand-solderable SMD/TH module that integrates the **Raspberry Pi RP2040** MCU with 8MB of FLASH, an LDO, LiPo charge management (including a charge LED), a reset button, and a Neopixel.

It breaks out all the GPIOs as well as USB, SWD, BOOTSEL, RST, and the voltage pins.

If you want to get into the technical stuff, see the [RP2040 Stamp Datasheet](https://core-electronics.com.au/attachments/localcontent/rp2040_stamp_datasheet_78521c5359a.pdf) to learn even more!

The Stamp was created to allow you to use the Raspberry Pi RP2040 in your designs without having to solder small-pitch QFN chips or worry about lots of external circuitry.

All you need to get you started is a 5V supply or a LiPo battery. The Stamp will take care of the charging and switching the power sources.

The castellated edges with **2mm pitch** can be hand-soldered directly to a carrier board or by using pin headers. [You can find footprints for many PCB programs including KiCad (5 and 6), Eagle CAD, and EasyEDA here](https://github.com/solderparty/rp2040_stamp_footprints/).

At only **1 by 1 inch** (25mm x 25mm), the Stamp packs a lot of features:

- **8MB of FLASH**
- **500mA 3.3V LDO**
- **All 30 GPIOs broken out**
- **A Neopixel**
- LiPo supply and charging circuit (with charging LED)
- USB broken out
- SWD broken out
- Reset Button
- 12MHz crystal

and of course, everything that comes with the Raspberry Pi RP2040 itself:

- Dual core ARM Cortex-M0+ @ 133MHz
- 264kB SRAM
- 2 UARTs
- 2 SPIs
- 2 I2Cs
- 16 PWM channels
- USB with Host and Device support

The RP2040 MCU comes with a pre-programmed ROM UF2 Bootloader, by pulling the BOOTSEL pin low and resetting, or by double-pressing the RESET button (if the FW supports it), you can upload new firmware using the USB disk drive.

The RP2040 Stamp board comes pre-flashed with CircuitPython 7.1.0-beta.1, if you want to use it with CircuitPython, it's recommended that you [check for the latest version](https://circuitpython.org/board/solderparty_rp2040_stamp/) and if there is one, update it according to the method mentioned above.

In addition to the Stamp, we also offer a reference design - [the RP2040 Stamp Carrier.](https://core-electronics.com.au/products/rp2040-stamp-carrier)

**Specs and Docs**- [Source Code](https://github.com/adafruit/circuitpython)
- [Documentation](https://rp2040-stamp.solder.party/)
- [Design Files](https://github.com/solderparty/rp2040_stamp_carrier_hw)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/S/P/SP011-1.jpg)