empowering creative people

  1. Monster Moto Shield DEV-10182 Sparkfun Australia

    Monster Moto Shield

    SKU: DEV-10182
    This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires. Learn More
    $106.32 AUD, inc GST
    AUD, inc GST
    delivered by
    Wed 31st of May

    $106.32 AUD

  2. Orangutan SVP-324 Robot Controller (partial kit) POLOLU-1326 Pololu Australia

    Orangutan SVP-324 Robot Controller (partial kit)

    SKU: POLOLU-1326
    This partial kit gives you the flexibility make a customized Orangutan SVP-324 with the headers and other through-hole components that best suit your project. All of the surface-mount parts are pre-soldered, including an ATmega324PA AVR microcontroller with 32 KB flash and 2 KB RAM, but nothing is soldered to the through-hole pads. The partial kit includes male and female versions of all of the header pins. An LCD is not included. Learn More
    $94.18 AUD, inc GST
    AUD, inc GST
    $94.18 AUD
  3. Orangutan X2 with VNH2 POLOLU-718 Pololu Australia

    Orangutan X2 with VNH2

    SKU: POLOLU-718
    This robot controller is by far the most powerful Orangutan, and it is intended for small and medium-sized robots. The design features a dual-AVR architecture that leaves an ATmega1284P AVR microcontroller almost completely available to the user while taking care of low-level motor control tasks on a pre-programmed mega328, which also doubles as a programmer for the master processor. This version features VNH2SP30 motor drivers. It does not include an LCD. Learn More
    $149.51 AUD, inc GST
    AUD, inc GST
    $149.51 AUD
  4. Orangutan LV-168 Robot Controller POLOLU-775 Pololu Australia

    Orangutan LV-168 Robot Controller

    SKU: POLOLU-775
    The Orangutan LV-168 is a full-featured controller for low-voltage robots. Thanks to a step-up voltage regulator, you can power this Orangutan with two or three 1.2-1.5 V batteries while maintaining 5 V operation for its Atmel mega168 AVR microcontroller and your sensors. A pair of discrete, low-voltage H-bridges deliver up to 2 A continuous per channel to get the most power out of low-voltage motors. Learn More
    $69.37 AUD, inc GST
    AUD, inc GST
    $69.37 AUD
  5. Orangutan SVP-1284 Robot Controller (assembled) POLOLU-1327 Pololu Australia

    Orangutan SVP-1284 Robot Controller (assembled)

    SKU: POLOLU-1327
    The Orangutan SVP-1284 robot controller is a super-sized version of Pololu's popular Orangutan SV, with a built-in AVR ISP programmer, more I/O lines, and more regulated power, and more memory. Based on the new ATmega1284P AVR microcontroller (128 KB flash, 16 KB RAM, 4 KB EEPROM) and featuring higher-power dual motor drivers (2 A continuous per channel), a bigger 16×2 LCD, and a demultiplexer for easy control of up to eight servos, the Orangutan SVP makes a great starting point for your robot or electronics project. Learn More
    $125.59 AUD, inc GST
    AUD, inc GST
    $125.59 AUD
  6. Baby Orangutan B-48 Robot Controller POLOLU-1215 Pololu Australia

    Baby Orangutan B-48 Robot Controller

    SKU: POLOLU-1215
    The Baby Orangutan B-48 is a very compact but complete robot controller, packing a high-performance AVR microcontroller and two motor drive channels in the same 24-pin form factor as competing units that include just a microcontroller. This version includes Atmel’s ATmega48 microcontroller with 4 KB of program memory and 512 bytes of RAM. Note: This version of the Baby Orangutan is now only available for high-volume orders. Please contact Pololu for more information, or consider the Baby Orangutan B-328 as an alternative. Learn More
    $21.31 AUD, inc GST
    AUD, inc GST
    $21.31 AUD
  7. Orangutan SVP-324 Robot Controller (assembled) POLOLU-1325 Pololu Australia

    Orangutan SVP-324 Robot Controller (assembled)

    SKU: POLOLU-1325
    The Orangutan SVP-324 robot controller is a super-sized version of Pololu's popular Orangutan SV, with a built-in AVR ISP programmer, more I/O lines, and more regulated power. Based on the ATmega324PA AVR microcontroller (32 KB flash, 2 KB RAM, 1 KB EEPROM) and featuring higher-power dual motor drivers (2 A continuous per channel), a bigger 16×2 LCD, and a demultiplexer for easy control of up to eight servos, the Orangutan SVP makes a great starting point for your robot or electronics project. Learn More
    $106.75 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 5th of Jun

    $106.75 AUD

  8. Orangutan X2 with VNH3 and LCD POLOLU-720 Pololu Australia

    Orangutan X2 with VNH3 and LCD

    SKU: POLOLU-720
    This robot controller is by far the most powerful Orangutan, and it is intended for small and medium-sized robots. The design features a dual-AVR architecture that leaves an ATmega1284P AVR microcontroller almost completely available to the user while taking care of low-level motor control tasks on a pre-programmed mega328, which also doubles as a programmer for the master processor. This version features VNH3SP30 motor drivers and a 4-line x 20-character LCD. Learn More
    $174.64 AUD, inc GST
    AUD, inc GST
    $174.64 AUD
  9. Orangutan SV-328 Robot Controller POLOLU-1227 Pololu Australia

    Orangutan SV-328 Robot Controller

    SKU: POLOLU-1227
    Want to build a small robot that doesn’t look like a PCB on wheels? The Orangutan is small enough for integrating into a small robot, rather than being the small robot. With Atmel’s powerful ATmega328P AVR microcontroller, motor drivers, buttons, display, and buzzer, all you need to add is your own chassis, sensors, software… you know, the fun stuff! Learn More
    $81.62 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 5th of Jun

    $81.62 AUD

  10. Orangutan X2 with VNH3 POLOLU-716 Pololu Australia

    Orangutan X2 with VNH3

    SKU: POLOLU-716
    This robot controller is by far the most powerful Orangutan, and it is intended for small and medium-sized robots. The design features a dual-AVR architecture that leaves an ATmega1284P AVR microcontroller almost completely available to the user while taking care of low-level motor control tasks on a pre-programmed mega328, which also doubles as a programmer for the master processor. This version features VNH3SP30 motor drivers. It does not include an LCD. Learn More
    $136.95 AUD, inc GST
    AUD, inc GST
    $136.95 AUD

Set Ascending Direction

1-10 of 13

Page:
  1. 1
  2. 2