Power HD High-Torque Servo 1501MG

SKU: POLOLU-1057 Brand: Pololu

Retired Product

Replaced by: POLOLU-3426
This product has been replaced by: POLOLU-3426
This product is no longer available. This page is only for reference.

The HD-1501MG is a powerful standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for a servo this fast (if you need even more torque than this, check out the larger 1235MG giant servo). The 1501MG works with standard RC servo pulses, providing a running angle of approximately 165° over a servo pulse range of 800 µs to 2200 µs, and it has a 10" (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible. You can find more information about this servo under the specifications tab and in its datasheet (380k pdf).

The servo cable is terminated with a Futaba-compatible JR-style connector.

An example of hardware included with the Power HD high-torque servo 1501MG. Actual hardware might vary.

This servo is also compatible with Pololu's Mounting Bracket for Standard-Size Servos:

The pictures below show the metal gear train and ball bearings that help the servo deliver such high torque. Replacement gears for the 1501MG are available separately.

Replacement Gear Set for Power HD 1501MG High-Torque Servos.

Note that, as with most hobby servos, stalling or back-driving this servo can damage it; Pololu carry replacement gears for the 1501MG that can used in the event of gearbox damage. This servo can draw bursts of current in excess of 3 A at 6 V, so please make sure you have an appropriate power supply. For comparison, a typical standard-size servo might draw around an amp when straining.

Comparison to the FEETECH FS5115M high-torque servo

The FS5115M high-torque servo from FEETECH is a lower-cost alternative to the 1501MG with nearly identical dimensions and similar performance. The two servos should be generally interchangeable for most applications. The picture below shows both the FS5115M and the 1501MG side by side:

People often buy this product together with:

Micro Maestro 6-Channel USB Servo Controller (Assembled)Micro Maestro 6-Channel USB Servo Controller (Assembled)
Mini Maestro 12-Channel USB Servo Controller (Assembled)Mini Maestro 12-Channel USB Servo Controller (Assembled)

Dimensions

Size:40.7 x 20.5 x 39.5 mm
Weight:60 g

General specifications

Digital?:N
Speed @ 6V:0.14 sec/60°
Stall torque @ 6V:17 kg·cm
Speed @ 4.8V:0.16 sec/60°
Stall torque @ 4.8V:15.5 kg·cm
Hardware included?:Y
Lead length:10 in
Operating Temp:-10°C ~ 50°C
Operating Voltage Range4.8V ~ 6.0V
Control SystemPWM

File downloads

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...

PiicoDev Schematic System

Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Introduction: Hi everybody. Over the past few weeks, I have been working on an intuitive system th...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.