DF15RSMG 360 Degree Motor (20kg)

Rating:
100% of 100
SKU: SER0035 Brand: DFRobot
This is a most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes.
$34.60 AUD, inc GST
$31.45 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 2nd of Apr

Quantity Discounts:

  • 10-25 $30.51 (exc GST)
  • 25+ $29.88 (exc GST)
- +

4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Introduction

This is a most powerful standard servo sized motor from DFRobot so far. The DF15RSMG  equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the robot arm or the joints.The shells of this kit are thickened to make it stable enough for motion system.
 
The torque of this motor is about 19kg.cm at 7.4v power supply.Using the Arduino servo library, you could drive this servo motor easily.To reduce the consumption of your microcontroller, this servo has a lock function for the pulse detection. So driving it to a target position just requires one PPM controlling signal.
 
 
Mechanical specification
  • Rotation angle range: 360°
  • No-load speed:60°/0.16s @7.4v
  • Stall torque:19.3kg.cm(7.4v)
  • Dynamic torque:15.1kg.cm(7.4v)
  • Gear:steel,copper mixed gear
  • Assembly method:fastening with double layer 4 screws
  • Equip 2 pairs of shells,2 metal servo horns and 2 servo support
  • Size: 40x40x20 (mm)
 
Electrical specification 
  • Working Voltage: 5-7.4v
  • Stall current:3A(@8.5V - Limit test)
  • PPM Voltage:3V-5V
  • PPM Resolution:2us
  • PWM driver frequency:4KHZ
  • Range of PPM positive pulse width:400us-2550us
  • Minimum value of PPM negative pulse width:400us
 
Cable definition
  • Brown - GND
  • Red  - VCC
  • Orange  - Signal(PPM input wire)
 
Shipping List
  • DF15RSMG Servo       1 unit
  • Servo Shell          2 unit
  • Fitting package      1 unit
 
Documents

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Servos, Steppers or Solenoids? | Choosing an Actuator to Move Your Project

In this guide, we go over some common ways of adding motion to your project with actuators such as ...
In this guide, we go over some common ways of adding motion to your project with actuators such as ...

Getting Started with Servos | Examples with Raspberry Pi Pico

In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and final...
In this guide, we'll learn what a Servo is, when we might use one, how to choose a Servo, and final...

Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi

This guide will teach you how to control up to 992 5V Servos through the GPIO pins on your Rasp...
This guide will teach you how to control up to 992 5V Servos through the GPIO pins on your Rasp...

How To Control A Motor with the Raspberry Pi

In this tutorial, we are going to connect a Motor to the Raspberry Pi and create a hypnotic self-spi...
In this tutorial, we are going to connect a Motor to the Raspberry Pi and create a hypnotic self-spi...

Projects

Pico Baro V2

Introduction: The inspiration for this project stems back to my childhood when I was curious to f...
Introduction: The inspiration for this project stems back to my childhood when I was curious to f...

Micro:bit Random Selector

This project has been created to be used as an exemplar for Year 7 Technology students to demonstrat...
This project has been created to be used as an exemplar for Year 7 Technology students to demonstrat...

DIY Pi Buggy

The motivation behind this project came from a robotics and engineering club that I've been going to...
The motivation behind this project came from a robotics and engineering club that I've been going to...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.