Motor drivers are commonly paired with a microcontroller to provide locomotion for your next project. Be sure to match the voltage and current requirements for your motor.
Makerverse Motor Driver 2 ChannelDrive 2x Brushed DC motors or a bipolar stepper with optional current limiting- Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3The original Adafruit Motorshield kit is one of Adafruit's most beloved kits, which is why they decided to make something even better. This is an upgrade to the original shield...$42.90 AUD, inc GSTAs low as $39.90 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- DRV8833 Dual Motor Driver CarrierThis tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.
- Pololu Dual VNH5019 Motor Driver Shield for ArduinoSKU: POLOLU-2507 Brand: PololuGet your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
- 2A Dual Motor ControllerSKU: DRI0002 Brand: DFRobot
This is 4.8-46V, 2A Dual Motor Controller is the revised version of the DF-MDV1.0. Drive current up to 2A per motor output.
- Pololu Dual MC33926 Motor Driver Shield for ArduinoSKU: POLOLU-2503 Brand: PololuThis shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
- VNH5019 Motor Driver BreakoutSKU: POLOLU-1451 Brand: PololuThis carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.
- Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+SKU: POLOLU-2753 Brand: PololuThis compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.
- Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini KitLet your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up...$48.95 AUD, inc GSTAs low as $45.52 AUD, inc GST
Out of Stock
Sign up to get notified when it's available to order.
- DRV8838 Single Brushed DC Motor Driver CarrierSKU: POLOLU-2990 Brand: PololuThis tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
- Pololu Dual TB9051FTG Motor Driver for Raspberry Pi (Assembled)SKU: POLOLU-2762 Brand: PololuThis motor driver expansion board and its corresponding Python library make it easy to control a pair of bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+
- DRV8835 Dual Motor Driver CarrierSKU: POLOLU-2135 Brand: PololuThis tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
- Quad DC Motor Driver Shield for ArduinoSKU: DRI0039 Brand: DFRobotThe latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG motor driver chips, compared with the traditional L298N chip, efficiency is improved and the component size also greatly reduced. The chip doesn't heat in to the rated range, and a single path maximum output 1.2A continuous current. The module includes a built-in low voltage detection circuit and thermal shutdown protection circuit, which is safe and reliable. This module is suitable for all kinds of DIY production.
- 15A Single DC Motor DriverSKU: DRI0042 Brand: DFRobotThis is an ultra small size DC motor driver for room limited projects, while the impressive IC - LM2575 could provide a powerful way to drive 36V@15A motors. Also its UVLO (Under Voltage Latch-Out) feature provides a safe guard for your system. Besides all, it is very considerate to own an 5V output for Arduino or any other devices, and its interface is ESD (electro-static discharge) protection.
- 2x7A DC Motor DriverSKU: DRI0041 Brand: DFRobotThis is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.
- 2x1.2A DC Motor Driver (TB6612FNG)SKU: DRI0044 Brand: DFRobotThis DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins...
- Big Motor + Encoder Module for YukonSKU: PIM691 Brand: PimoroniDrive a powerful brushed motor (with encoder feedback) at up to 8A continuous from your Pimoroni Yukon project...
- Dual Motor / Bipolar Stepper Module for YukonSKU: PIM693 Brand: PimoroniDrive two brushed DC motors or one bipolar stepper motor from your Pimoroni Yukon project, with this dual motor driver with adjustable current limiting...
- DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit (Header Pins Soldered)SKU: POLOLU-3769 Brand: PololuThis version of our DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current Limit ships with male header pins installed, so no soldering is required to...
- DRV8434S SPI Stepper Motor Driver Carrier, 2A Max. Current LimitSKU: POLOLU-3768 Brand: PololuThis breakout board for TI’s DRV8434S microstepping bipolar stepper motor driver operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A per...
- DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit (Header Pins Soldered)SKU: POLOLU-3767 Brand: PololuThis version of our DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current Limit ships with male header pins installed, so no soldering...
- DRV8434S SPI Stepper Motor Driver Carrier, Potentiometer for Max. Current LimitSKU: POLOLU-3766 Brand: PololuThis breakout board for TI’s DRV8434S microstepping bipolar stepper motor driver operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A per...
- DRV8434A Stepper Motor Driver Carrier (Header Pins Soldered)SKU: POLOLU-3765 Brand: PololuThis version of our DRV8434A Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate...
- DRV8434A Stepper Motor Driver CarrierSKU: POLOLU-3764 Brand: PololuThis breakout board for TI’s DRV8434A microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 4.5 V to 48 V....
- MP6550 Single Brushed DC Motor Driver CarrierSKU: POLOLU-4733 Brand: PololuThis tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A...
Featured Products
View All
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a ...
$2.35
View
The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to star ...
$7.45
View
This is an industrial USB to RS485 converter with original FT232RL and SP485EEN ...
$20.80
View
This Isopropyl Alcohol (IPA) contains 99.997% Isopropyl alcohol and is perfect f ...
$16.74
View
Makers love reviews as much as you do, please follow this link to review the products you have purchased.