Lulzbot TAZ 5 3D Printer Sale - Get Yours Today! × [hide]

empowering creative people

  1. Pololu Jrk 12v12 USB Motor Controller with Feedback POLOLU-1393 Pololu Australia

    Pololu Jrk 12v12 USB Motor Controller with Feedback

    SKU: POLOLU-1393
    The powerful jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used as an open-loop speed control or for closed-loop speed or position control. The continuous output current is approximately 12 A (30 A max) and the operating range of 6–16 V (with transient protection up to 40 V). Learn More
    $125.59 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 1st of May

    $125.59 AUD

  2. Pololu TReX Dual Motor Controller DMC01 POLOLU-777 Pololu Australia

    Pololu TReX Dual Motor Controller DMC01

    SKU: POLOLU-777
    The TReX blends RC, analog, and serial inputs for a powerful motor control solution capable of delivering a continuous 13 A per motor. The TReX will work right out of the box as an electronic speed control (ESC), but its ability to seamlessly transition between RC/analog and serial control makes it capable of so much more! Learn More
    $125.59 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $125.59 AUD

  3. Pololu Simple High-Power Motor Controller 24v12 POLOLU-1379 Pololu Australia

    Pololu Simple High-Power Motor Controller 24v12

    SKU: POLOLU-1379
    The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with Pololu's free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 40 V and is efficient enough to deliver a continuous 12 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations. Learn More
    $55.23 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $55.23 AUD

  4. Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled) POLOLU-1394 Pololu Australia

    Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled)

    SKU: POLOLU-1394
    The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8–28 V, with derated performance down to 5 V and transient protection to 40 V. The board ships with connectors installed as shown (no soldering required). Learn More
    $65.28 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 1st of May

    $65.28 AUD

  5. Pololu Simple High-Power Motor Controller 24v23 POLOLU-1383 Pololu Australia

    Pololu Simple High-Power Motor Controller 24v23

    SKU: POLOLU-1383
    The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with Pololu's free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 40 V and is efficient enough to deliver a continuous 23 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations. Learn More
    $75.33 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $75.33 AUD

  6. Pololu Simple Motor Controller 18v7 (Fully Assembled) POLOLU-1372 Pololu Australia

    Pololu Simple Motor Controller 18v7 (Fully Assembled)

    SKU: POLOLU-1372
    The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with Pololu's free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown. Learn More
    $42.67 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $42.67 AUD

  7. Pololu TReX Jr Dual Motor Controller DMC02 POLOLU-767 Pololu Australia

    Pololu TReX Jr Dual Motor Controller DMC02

    SKU: POLOLU-767
    This lower-power, smaller, and lower-cost version of the TReX is the ultimate general-purpose motor controller for small motors: it has a wide operating range (5 to 24 V), delivers 2.5 A continuously per motor, provides current sensing on the two main channels, and it features the TReX triple interface that allows you to control motors from a serial line (RS-232 or TTL), radio control (RC) receiver, or analog voltage source such as a potentiometer. Learn More
    $75.33 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 1st of May

    $75.33 AUD

  8. Pololu Simple High-Power Motor Controller 18v25 POLOLU-1381 Pololu Australia

    Pololu Simple High-Power Motor Controller 18v25

    SKU: POLOLU-1381
    The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with Pololu's free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 25 A without a heat sink. It ships with the power capacitor and connectors included but not soldered in, allowing for custom installations. Learn More
    $69.05 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $69.05 AUD

  9. Pololu Jrk 21v3 USB Motor Controller with Feedback POLOLU-1392 Pololu Australia

    Pololu Jrk 21v3 USB Motor Controller with Feedback

    SKU: POLOLU-1392
    The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8–28 V, with derated performance down to 5 V and transient protection to 40 V. The board ships with connectors included but not soldered in, allowing for custom installations. Learn More
    $62.77 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $62.77 AUD

  10. Pololu Qik 2s12v10 Dual Serial Motor Controller POLOLU-1112 Pololu Australia

    Pololu Qik 2s12v10 Dual Serial Motor Controller

    SKU: POLOLU-1112
    This powerful motor controller allows variable speed and direction control of two large, brushed DC motors using a simple serial interface and provides several advanced features, such as motor acceleration control and configurable current limiting. Automatic baud detection up to 115.2 kbps and inputs for both RS-232 and TTL serial make it easy to add motors to your microcontroller- or computer-based project. The operating voltage range is 6 to 16 V; the continuous current per channel is up to 13 A (30 A peak). Learn More
    $94.18 AUD, inc GST
    AUD, inc GST
    delivered by
    Mon 8th of May

    $94.18 AUD

Set Ascending Direction

1-10 of 19

Page:
  1. 1
  2. 2