RFEMWSUB3G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 15-2700 MHz (0.015-2.7GHz) continuous frequency band.
It gets attached internally to the RF Explorer main board and exhibits a second antenna connector to cover the new band.
Feature
Easy to plug in your RF Explorer unit, compatible with all models. Optionally, you may want to order a fully assembled RF Explorer 3G Combo including a WSUB1G base model and a RFEMWSUB3G expansion module.
Includes a transport EVA carry case for RF Explorer
Extend band coverage to any frequency starting at 15MHz and going up to 2.7GHz. This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF, FM radio, GPS, WiFi and WiMax, Bluetooth, etc.
Extend internal FLASH and RAM memory for additional capabilities
Lifetime free firmware upgrades available, open to community requested features
Important: Note this unit does not include RF Generator functionality, only Spectrum Analyzer functionality is available.
Specification
Frequency band coverage: 15-2700 MHz
Standard SMA 50 ohms connector
Amplitude resolution: 0.5dBm
Dynamic range: -110dBm to -10dBm
Absolute Max input power: +30dBm
Average noise floor level (typical): -100dBm
50 ohms wideband Nagoya NA-773 telescopic antenna included
Frequency stability and accuracy (typical): +-10ppm
Amplitude stability and accuracy (typical): +-6dBm
Frequency Span: 100MHz
Frequency resolution: 1Khz
Resolution bandwidth (RBW): automatic 3KHz to 600KHz
Expansion RAM: 64KB
Expansion ROM: 2MB
Firmware: RF Explorer must upgrade to firmware v1.09 or higher to use this module. Note some of the features and operation accuracy will be improved in upcoming lifetime free firmware revisions.
For more info and to get started with your RF Explorer, visit the start page.
If you encounter any problems when using this product, please contact rfexplorer(at)arocholl.com for the technical support.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments