# Raspberry Pi Prototyping Board (Seeed Studio)

**Type:** Product page · **SKU:** SS114990170 · **Brand:** [Seeed Studio](https://core-electronics.com.au/brands/seeed-studio-australia)
**Page:** https://core-electronics.com.au/raspberry-pi-prototyping-board-seeed-studio.html ([markdown](https://core-electronics.com.au/raspberry-pi-prototyping-board-seeed-studio.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

This Prototyping Board is Designed for Raspberry Pi B+/A+ and Raspberry Pi 2 Model B, you can combine your raspberry pi with other components, modules. There are a EEPROM for you to make your HAT for Raspberry Pi.

**Features:**

- A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- EEPROM for Raspberry Pi HAT
- POWER LED indicator

**Specification:**

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/1/1/114990170_201.jpg)