empowering creative people

Core Electronics > Retired

ProtoX Pro Prototype STACKABLE Shield for Arduino

SKU: 005-K023

$8.18 AUD, inc GST
$7.44 AUD, exc GST

More Views

ProtoX Pro Prototype STACKABLE Shield for Arduino

SKU: 005-K023

$8.18 AUD, inc GST
$7.44 AUD, exc GST


  • $6.95 Standard (2-4 days, tracked)
  • $9.95 Express (Overnight*, tracked)
  • $3 Economy Post* (3-7 days, no tracking)
  • FREE Pickup (Newcastle only)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This product has been retired and kept here for reference.

The ProtoX is one of the lowest cost prototype boards on the market. Don't let the price fool you, the ProtoX is in our opinion the most versatile too. Here's how it's "wired". Blue tracks are the top and red the bottom.  

The ProtoX Pro is even better, with stackable headers 

  • Designed to support the Arduino, XINO, Amicus and others that are Arduino shaped.
  • 3 joined through holes in set out in pairs either side of a GND and power rail (down the centre). Enables easy connection to DIP devices and the majority of through hole parts.
  • Has the silkscreen legend on the back so you can easily see which pin is which (an absolute godsend)
  • Very useful SMT pads.

    SOIC pads both narrow and wide to support any combination upto 28 pins.

    TSSOP pads to support any combination upto 28 pins (mounts on underside of board and shares the SOIC through holes). 0.65mm pitch.

    2 x SOT 223 (all 4 pads) for large SMD parts such as voltage regulators, power transistors, FET's etc

    2 x SOT 22-3 (all 6 pads) for small SMD parts signal transistors, diodes etc

    NOTE: SOT pads are shared so max of 2 of either type.
  • Comes with 2 x 0.1uf noise filtering capacitors. One for the 3V3 or 5V rail and one you can configure in anyway.
  • Comes with 2 x 8 pin and 2 x 6 pin stackable headers so more shields can sit on top
  • Useful power blocks, 3 x group of 5, one pre connected to GND the other two can be configured in any way.
  • TX & RX pins brought out to front facing holes.
  • Through holes to easily add 3 front facing LED's (bottom left 12 pads) or anything else of similar size.

This product is listed in:

Documentation and Resources:
  • The Maker Revolution
  • The Maker Revolution celebrates the creation of new devices and the modification of existing ones - the transition from a consumer buying goods to eventually having a major part in their creation. The Maker Revolution places strong emphasis on free (...

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

We deliver Australia-wide with these options:

  • $3 for Small Items (3-7 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $9.95 for Express Post (Overnight for most of Australia, 2+ days for rural, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (only after we email you to notify your order is ready)

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
NSW, 2289

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!