# Proto-pasta - 2.85mm Diameter - Conductive Graphite Filament - 500g

**Type:** Product page · **SKU:** ADA3752 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/proto-pasta-2-85mm-diameter-conductive-graphite-filament-500g.html ([markdown](https://core-electronics.com.au/proto-pasta-2-85mm-diameter-conductive-graphite-filament-500g.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: CE04725.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/CE04725

## Description

[Pici](https://en.wikipedia.org/wiki/Pici) up this filament today! It'd be [Fusilli](https://en.wikipedia.org/wiki/Fusilli) not to buy this filament! Adafruit can't [tagliatelle](https://en.wikipedia.org/wiki/Tagliatelle) you enough about this filament. Are these puns [Spirali](https://en.wikipedia.org/wiki/List_of_pasta)-ng out of control?

Sorry! Adafruit had to get that out of Adafruit's system. Proto-pasta's fun packaging makes Adafruit hungry for Italian food. If you're hankering for unusual and unique material filaments, Adafruit have got a new spool of noodles for you!

This **Proto-pasta 2.85mm diameter 500 grams of filament in Conductive Graphite** opens up a new world of 3D-printed fun *but with* electronics!

Proto-pasta Conductive PLA is an FFF/FDM filament, so now you can print circuit assembles with [touch or light sensors](https://core-electronics.com.au/#) or [LEDs](https://core-electronics.com.au/#) to your gamut of 3D printed creations!

And, of course, even though it has the word "Pasta" in the name, it's *not* for eating.

Check out the Proto-pasta site here for more info and frequently asked questions about this filament!

This filament performs best extruded between **195°C and 225°C**.

**Features:**

- Solid, weighted feel with 1.5x the density of standard PLA
- Attracts magnets (neodymium type recommended for strongest attraction)
    - Induction at magnetic saturation about 0.15 Tesla
    - Relative (to air) permeability - between 5 and 8 independent of frequency up to 1 MHz
    - Permeability - between 62E-7 and 100E-7 H/m independent of frequency up to 1 MHz
- More thermally conductive
- Prints like PLA with less nozzle wear 'n tear

[If you're looking for more information on the different types of 3D printing material, here's a great tutorial on Adafruit's Learn System!](https://learn.adafruit.com/skill-badge-guide-3d-printing/3d-printing-overview)

## Technical Details

**Resistivity:**

- Volume resistivity of molded resin (not 3D Printed): **15 ohm-cm**
- Volume resistivity of 3D printed parts along layers (x/y): **30 ohm-cm**
- Volume resistivity of 3D printed parts against layers (z): **115 ohm-cm**
- Resistance of a 10cm length of 2.85mm filament: **600ohm**

**Bed Temp** (if available, is not required): **50°C**

**Hot End Temp**: **215 – 230°C** (Proto-pasta runs it on the hotter side to encourage layer adhesion)

**Performance:**

- Strength: Fair strength. More flexible than PLA, but less layer adhesion
- Stiffness: Low, semi-flexible
- Heat Resistance: Similar to PLA, use below 50ºC
- Layer Adhesion: Fair layer adhesion. Not as good as normal PLA
- Flexibility: Filament is quite flexible but will break if bent repeatedly (particularly 2.85mm). Printed parts are rigid if more than a mm or two thick. Thin sections are somewhat flexible but fail along layer lines if flexed more than a few times.
- Failure Mode: If flexed to breakage, failure will be along layer lines.
- Warping: Very low warping
- Dual-Head compatibility: Compatible with (sticks to) PLA in dual material prints

Proto-pasta Conductive PLA is a compound of Natureworks 4043D PLA, a dispersant and conductive carbon black. In filament form, it is very flexible, and is compatible with any PLA printing printer.

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/3/7/3752-01.jpg)