# PID Digital Temperature Control Controller F/C CD101(FK02-VM\*AN-NN)

**Type:** Product page · **SKU:** 017-DC-TE11113 · **Brand:** [Sure Electronics](https://core-electronics.com.au/brands/sure-electronics-australia)
**Page:** https://core-electronics.com.au/pid-digital-temperature-control-controller-f-c-cd101-fk02-vm-an-nn.html ([markdown](https://core-electronics.com.au/pid-digital-temperature-control-controller-f-c-cd101-fk02-vm-an-nn.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

**Specifications**:

- Size: 48(L) x 48(W) x 110 (H) ±0.2mm
- Input K type thermocouple (TC)
- Accuracy Measuring accuracy: ±0.5%FS
- Cold-end compensation tolerance: ±2℃（can be modified by software in 0~50℃）
- Resolution: 14 bit
- Sampling cycle: 0.5 Sec
- Display Process value (PV), Setting value (SV)
- Output, alarm and self-tuning can be indicated by: LED
 
**Control method:**

- PIN control (including ON/OFF, step-type PID and continuous PID)
- Self-tuning control
 
**Controlling output:**

- Relay output: contact capacity 250V AC 3A (resistive load) (**Refrigeration**)
- Voltage pulse output: 0/12V (suitable for solid state relay SSR) (**Heating-up, a 12V relay needed**)
- Alarm function output: 1 way
- Contact capacity of output: 250V AC 3A (resistive load)
 
**Setting range:**

 Setting value (SV): identical to measuring range (PV)

- Proportional band (P): 0~full range (ON/OFF control when set to 0)
- Integral time (I): 0~3600 sec (No integral action when set to 0)
- Derivative time (D): 0~3600 sec (No derivative action when set to 0)
- Heat-reset proportional cycle: 1~100 sec
- Detective temperature range：0 to 400℃
 
**Mis**

- Insulation resistance: >50M ohm(500V DC)
- Insulation resistance: 1500V AC/min
- Power Consumption: 10 VA
- Service environment: 0~50℃, environment with no corrosive gas 30~85% RH
 
**Caution:**

- Only clean the instrument when power off
- Please use a soft cloth or cotton paper to clean up the stain on the display
- Do not clean up or touch the display by hard matters in case of any scratch
- Never use sharp & hard matters such ass screwdrivers or ball pan to touch the buttons on the panel, in case of any scratch or damage.
 
- Here is link provided by one of our customers for setting other parameters in "meter parameter mode".
- http://seattlefoodgeek.com/wp-content/uploads/2010/02/CD-101-Instruction-Manul-including-PV-adjustment.pdf
- You may read it for details.
- **Package Contents:** 
     PID Digital Temperature Control Controller F/C X 1
     Thermocouple (K type) X 1
 
 **Downloads:**

- User manual

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/1/2/1221820307819726835.jpg)