# Pibow Frame for Raspberry Pi Touch Display 2 (10.1") – Coupé Red

**Type:** Product page · **SKU:** PIM792 · **Brand:** [Pimoroni](https://core-electronics.com.au/brands/pimoroni-australia)
**Page:** https://core-electronics.com.au/pibow-frame-for-raspberry-pi-touch-display-2-10-1-coupe-red.html ([markdown](https://core-electronics.com.au/pibow-frame-for-raspberry-pi-touch-display-2-10-1-coupe-red.html.md))

Prop your Pi 5 touchscreen at any angle, protect its exposed back, and keep every port within reach.

## Pricing

- **Price:** $48.55 (inc GST) — $44.14 AUD, exc GST

## Availability & dispatch

- Available with a lead time — expect dispatch between Sep 09 and Sep 14.

## Description

Turn the bare [Raspberry Pi 10.1" Touch Display](https://core-electronics.com.au/raspberry-pi-touch-display-2-10-1-inch-portrait.html) into a desk-ready display that stands on its own. Three shaped acrylic layers wrap the back of the panel, and a pair of legs hold it at whatever angle suits your bench.

Mounting a Touch Display 2 usually means propping it against something or 3D printing a bracket. This frame removes that step with parts that bolt straight onto the display's existing rear mounting holes.

The layers cover the exposed rear electronics while leaving the touchscreen completely unobstructed, and every Raspberry Pi port stays reachable. Assembly is a few minutes with a screwdriver, using the fixings that came with your display.

We also stock [the same case/frame in Noir Black](https://core-electronics.com.au/pibow-frame-for-raspberry-pi-touch-display-2-10-1-noir-black.html).

### Features

- Two legs set landscape, portrait, upright or reclined viewing angles - repositioned without tools
- Leaves the touchscreen entirely unobstructed, preserving the full active area in a super clean aesthetic
- Shields the exposed rear of the panel behind three shaped acrylic layers, so the display survives handling and desk knocks
- Keeps every Raspberry Pi port accessible with the frame fitted, so power, HDMI and USB stay usable
- Bolts directly to the display's existing rear mounting points using its stock fixings
 
### Resources

- [Assembling Pibow Frame for Touch Display 2 (10.1") | Pimoroni](https://learn.pimoroni.com/article/assembling-pibow-frame-10)
 
### What's Included

- 3x Pibow acrylic frame layers
- 2x Pibow legs
- Required Fasteners
 
*Raspberry Pi Touch Display 2, Raspberry Pi and screwdriver are not included — the frame reuses the fixings supplied with your display.*

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/p/i/pim792-standing-mode_1.jpg)