# ModMyPi - Raspberry Pi T-Cobbler PRO Breakout

**Type:** Product page · **SKU:** CE05738 · **Brand:** [The Pi Hut](https://core-electronics.com.au/brands/the-pi-hut)
**Page:** https://core-electronics.com.au/modmypi-raspberry-pi-t-cobbler-pro-breakout.html ([markdown](https://core-electronics.com.au/modmypi-raspberry-pi-t-cobbler-pro-breakout.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: raspberry pi cobbler.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/raspberry%20pi%20cobbler

## Description

Ready to get PRO with your Raspberry Pi breakout boards? ModMyPi's T-Cobbler PRO has all the same nifty features as a [standard T-Cobbler breakout](https://core-electronics.com.au/search/?q=cobler), but with added power control to help your projects go further!

This neat little prototyping add-on board allows you to transfer those useful GPIO pins from the Raspberry Pi B+2/3 to a breadboard or prototyping project! The T-Cobbler PRO plugs directly into the Pi's GPIO (no ribbon cable required). and can then be plugged into a breadboard or similar prototyping area, and you're ready to hack. The T-Cobbler PRO is perfect when coupled with ModMyPi's [Raspberry Pi B+/2/3 breadboard case](https://core-electronics.com.au/modmypi-raspberry-pi-b-2-3-3b-breadboard-case.html) or with the [Raspberry Pi Zero breadboard case](https://core-electronics.com.au/modmypi-pi-zero-breadboard-case.html).

The T-Cobbler PRO features pre-soldered power line headers on either side for the 3.3V & 5V lines on the Pi, which plug into the breadboards power lines. The power lines are switchable (so you can turn both on/off), and have a little LED to indicate when the power is on!

### Features

- Included T-Cobbler PRO Printed Circuit Board (PCB)
- Fully Labelled Silkscreen for Easy GPIO Identification
- Designed to Plug Directly into the Pi's GPIO
- Switched 5V & 3.3V Power Lines with On/Off Indicator LEDs
- Extra Long Header Pins (10mm)
- Designed to be used with the ModMyPi Breadboard Cases
- Uses SMT Socket Header & 40 Pin Extra Tall "Single Shroud" Header
- Fully Assembled - No Soldering Required

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/d/s/dsc_0212-1024x780.jpg)