# 13.56MHz RFID/NFC Sticker - 1KB

**Type:** Product page · **SKU:** ADA362 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/mifare-classic-13-56mhz-rfid-nfc-sticker-1kb.html ([markdown](https://core-electronics.com.au/mifare-classic-13-56mhz-rfid-nfc-sticker-1kb.html.md))

This is a blank 13.56MHz RFID/NFC sticker - often used for inventory uses but also wherever a sticker is desired. The tag contains a small RFID chip and an antenna...

> ⚠ If this product is unavailable, [we have alternatives here](https://core-electronics.com.au/rfidnfc-tag-adhesive-ntag213-chip-1356mhz.html)

## Pricing

- **Price:** $4.40 (inc GST) — $4.00 AUD, exc GST
- **Quantity discounts:** 10+ $3.88 (exc GST) · 50+ $3.80 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Aug 19 and Aug 24.

## Description

Note: Before purchasing you should double check the compatibility with your device. This product was confirmed working with:

Nokia Seven Plus - Android 10

Samsung Galaxy S7 - Android 9

This is a blank 13.56MHz RFID/NFC sticker - often used for inventory uses but also wherever a sticker is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

 These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our [PN532 NFC/RFID breakout board](https://core-electronics.com.au/pn532-nfc-rfid-controller-breakout-board-v1-3.html) and [Adafruit NFC/RFID Shield for Arduino](https://core-electronics.com.au/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras.html)!
 
 These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our [PN532 NFC/RFID breakout board](https://core-electronics.com.au/pn532-nfc-rfid-controller-breakout-board-v1-3.html) or [Adafruit NFC/RFID Shield for Arduino](https://core-electronics.com.au/adafruit-pn532-nfc-rfid-controller-shield-for-arduino-extras.html) to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

These use a ISO/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone/tablet.

## Technical Details

RFID chip specification:

- 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
- Built in encryption engine with 48-bit key
- 4 Byte unique identifier burned into the chip
- 13.56 MHz frequency

Tag specification:

- 41mm x 24mm x 0.2mm / 1.6" x 1" x 0.008
- 0.3 grams / 0.01 oz
- Works about 2.5" away from reader

![](https://core-electronics.com.au/attachments/localcontent/rohs_icon_8216055e11.jpg)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/3/6/362-00.jpg)