# Micro Servo - High Powered, High Torque Metal Gear

**Type:** Product page · **SKU:** ADA2307 · **Brand:** [Adafruit](https://core-electronics.com.au/brands/adafruit-australia)
**Page:** https://core-electronics.com.au/micro-servo-high-powered-high-torque-metal-gear.html ([markdown](https://core-electronics.com.au/micro-servo-high-powered-high-torque-metal-gear.html.md))

Add even more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (~90 in each direction), and works just...

## Pricing

- **Price:** $27.20 (inc GST) — $24.73 AUD, exc GST
- **Quantity discounts:** 10+ $23.98 (exc GST) · 50+ $23.49 (exc GST)

## Availability & dispatch

- Available with a lead time — expect dispatch between Aug 25 and Aug 31.

## Description

Add even *more* power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (~90 in each direction), and works just like the standard kinds you're used to but *smaller*. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Despite its size, this micro-servo is as strong as many 'standard' size servos! Works great with the Motor Shield for Arduino, Adafruit's 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.

This micro servo packs a big punch for its little size. it's just a little bit bigger than Adafruit's [High Torque Metal Gear Micro Servo](https://core-electronics.com.au/micro-servo-high-torque-metal-gear.html) but runs with almost double the stall torque.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left. **Note that unlike most servos you may be familiar with, this one does not have mechanical stops!**

## Technical Details

- Stall Torque (4.8v): 3.1kg/cm
- Stall Torque (6.0v): 3.5kg/cm
- Operating Speed (4.8v): 0.13sec/60°
- Operating Speed (6.0v): 0.08sec/60°
- Operating Voltage: 5.0~6.6v
- 36mm x 12mm x 31mm / 1.4" x 0.5" x 1.2"
- Wire Length: 257mm / 10.1"
- Weight: 14g
- Spline Count: 20

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/2/3/2307-00.jpg)