empowering creative people

Arduino > Compatible Boards

Mega 2560 R3 (Arduino-Compatible)

SKU: 018-MEGA-R3

$24.41 AUD, inc GST
$22.19 AUD, exc GST

More Views

Mega 2560 R3 (Arduino-Compatible)
24.41 AUD

SKU: 018-MEGA-R3

$24.41 AUD, inc GST
$22.19 AUD, exc GST
11 reviews 0 5 4.9
In stock, ships today if ordered before 2PM
Delivered by Wed, 27th of Sep
Shipping Offer

If you're looking to level up your Arduino project, the Mega 2560 is a great place to start. It's based on the Atmega2560 chip which provides a huge number of IO pins and functionality:

  • 54 Digital Input/Output pins (14 with hardware PWM capability)
  • 16 Analogue Inputs
  • 4 UART ports
  • USB connectivity
  • ICSP header

Whilst being a much larger and more capable board, the Mega2560 still clocks at 16MHz, just like the Uno, which means it won't run faster than a Uno, but you do get a lot more functionality to use within those 16MHz. Something to note about the Mega2560 is the use of a 16U2 which is programmed as a USB-serial converter rather than a standalone FTDI chip as many previous Arduino boards used.

This is the revision 3 model board which contains the following changes:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino® Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replaced the 8U2.

Tech Specs:

  • 100% compatible with genuine Arduino Mega2560
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz

*Note that this is a generic Arduino Compatible board, however, we stock the genuine Arduino Mega2560 as well*

What's in the Box:

  • Arduino compatible Mega2560 board
  • USB cable

This product is listed in:

Documentation and Resources:
Educational Workshops
  • Arduino Workshop for Beginners
  • Welcome to the Arduino Workshop, where you'll be able to follow our guided course which covers everything you'll need to know in order to create your own Arduino projects and become a leveled up maker. My name is Sam and along with being a maker my...
  • The Maker Revolution
  • The Maker Revolution celebrates the creation of new devices and the modification of existing ones - the transition from a consumer buying goods to eventually having a major part in their creation. The Maker Revolution places strong emphasis on free (...
  • How to Use a Logic Level Shifter/Converter
  • So you’ve got your microcontroller/development board ready to go, you’ve got your sensors and external components and you’re ready to build an IoT device to make the world your slave. But hang on a minute, the sensor you have only o...
  • Arduino with LattePanda
  • Ah, Arduino and LattePanda coming together at last. What could be better? Well along with the fact that your LattePanda is a fully fledged Windows 10 computer so you can program any Arduino board you want as normal, one of the best things about Latte...
  • Potentiometers and the Arduino Uno
  • Variable resistors come in all shapes and sizes, and they all do the same basic job. They allow you precisely control voltage/current flow within a circuit. The most common type of variable resistor we see in DIY electronics is the Potentiometer, or ...
  • Relay Operation and the Arduino Uno
  • If you could operate your switch without physically toggling it on and off, you would open yourself up to an entire section of electronics. Relays are one of the best ways of doing this. A relay is essentially just a switch, controlled by an electrom...
  • Handheld UV Meter
  • UV is important to reptiles (and people) in processing vitamin D3 which is needed to absorb calcium. Without it reptiles often suffer from Metabolic Bone Disease (MBD) which leads to weak bones and can be fatal. Thankfully, pet shops have the answer, UV producing globes which can stave off the dreaded MBD. These are in the form of T8 florescent tubes or compact florescent globes and go for $50+ each. And, yeah, they need to be re...
  • Tabot
  • Tabot is a robotic tablet dispenser. It is designed to help elderly people maintain their independence and help anyone who has tablets remember to take them on time.
  • Cosplay Blaster
  • Hey guys! First time poster. I've been working on a blaster for my girlfriend's costume, and I thought I would share it with everyone. When triggered, it plays a selected sound effect and flashes the light. Pretty simple :)
  • Coffee Grinder With Arduino
  • Using a few bits and pieces, this ordinary coffee grinder now has two presets to run the motor for a programmable length of time. The idea being that the grinder running for a set amount of time will deliver a certain amount of coffee each button press meaning the beans can be stored unground, keeping them fresher for longer. I completed this project for a friend, Ian, who lives for coffee. Ian wanted the same functionality in h...
  • The Hipster Coaster
  • We wanted to make a interactive display of the fun that can be had with DIY projects to take to Sydney Mini Maker Faire. We decided to do so by utilising the TinkerKit Braccio from Arduino.org, alongside some 3D Printing ingenuity, for an engaging display for all ages. Enter the Hipster Coaster in all its glory.   All the parts were printed seperately on our family of Lulzbot 3D Printers, later stuck together using a mi...

Product Comments


Customer Reviews

  1. Review by Gregory verified purchaser
    Rating
    80

    I purchased 2 of these and only received 1 USB cable. On one of the boards, all of the headers on one edge were bent through 90 degrees -- I was able to bend them back with no dramas. I will definitely buy again. (Posted on 17/09/2017)

  2. Review by David verified purchaser
    Rating
    100

    Good Serviuce (Posted on 1/08/2017)

  3. Review by dave verified purchaser
    Rating
    100

    fast sevice (Posted on 22/06/2017)

  4. Review by Monty verified purchaser
    Rating
    100

    Arrived as described, works perfectly. (Posted on 26/05/2017)

  5. Review by keith verified purchaser
    Rating
    100

    Prompt delivery (very) tested good, excellent service, an impressive site and system, follow up, very personal, a refreshing difference.
    Well done. (Posted on 26/10/2016)

  6. Review by Robin verified purchaser
    Rating
    100

    Purchased the Mega to construct a DCC++ controller for railway moddelling. Haven't put it together yet. Will have to pass on this for the time being.

    Robin J (Posted on 6/10/2016)

  7. Review by Danial verified purchaser
    Rating
    100

    im only a beginner but have not found a fault in any on these i have purchused, fast shipping which is great (Posted on 4/07/2016)

  8. Review by Greg verified purchaser
    Rating
    100

    This is great Arduino for ah-hoc projects, recommend the proto shield to go with it. (Posted on 4/05/2016)

  9. Review by Lian - just like the original verified purchaser
    Rating
    100

    This Arduino Mega clone looks and works just like the original, at least for my purposes of running a modified version of the PulseAmped code for a pulse sensor and controlling leds using the PWM pins. Also great service by Core, for providing the more expensive Arduino when they ran out of stock on the clone, but did not charge me the full price. This meant I got the gear on time for a public event, so am very grateful. (Posted on 16/08/2014)

  10. Review by Nathan - Great buy verified purchaser
    Rating
    100

    As a complete beginner in the world of electronics, I decided to purchase this clone rather than the much more expensive original, as I wasn't sure how well I would go with it.

    The order arrived fast and was packaged well. Everything that I ordered was delivered exactly as shown on the site without any problems. Shopping online is a little hit and miss sometimes, so its nice to have a good experience.
    (Posted on 11/01/2014)

  11. Review by Justin - Another great unit
    Rating
    100

    Another great unit at an excellent price. My board works great. I'll be back again. (Posted on 25/10/2013)

We deliver Australia-wide with these options:

  • $3 for Small Items (4-6 days, not tracked, only available on selected small items)
  • $6.95 for Standard Post (2-4 days, tracked)
  • $8.32 for Express Post (1-2 days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11.49 for Pack and Track (3+ days, tracked)
  • $16.50 for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount might increment based on the weight of your order.

Our physical address:

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Please checkout our customer service page if you have other frequently asked questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.