# Makeblock 9g Micro Servo Pack

**Type:** Product page · **SKU:** MB95026 · **Brand:** [Makeblock](https://core-electronics.com.au/brands/makeblock-australia)
**Page:** https://core-electronics.com.au/makeblock-9g-micro-servo-pack.html ([markdown](https://core-electronics.com.au/makeblock-9g-micro-servo-pack.html.md))

## Retired product

This product is retired and no longer available for purchase. Replaced by: goBilda.

**Replacement:** https://core-electronics.com.au/catalog/product/view/sku/goBilda

## Description

**Description:**

Makeblock 9g Micro Servo Pack is a servo pack for beginners who like to make stuff move, it contains a 9g servo, a servo hub, a servo bracket, and hardware. The 9g Micro Servo can rotate approximately 180 degrees, it works like standard servos but of course not as strong as a standard servo.

With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. A Me RJ25 Adapter also helps you connect the servo with a Me Baseboard easily.

**Features:**

- Small volume and lightweight
- Compatible with Me RJ25 Adapter
- A servo hub and a servo bracket are included.

**Specifications**

**1. Apply Environmental Conditions**

| No. | Item | Specification |
|---|---|---|
| 1.1 | Storage Temperature Range | -20°C~70°C |
| 1.2 | Operating Temperature Range | -10°C~60°C |

**2. Standard Test Environment**

| No. | Item | Specification |
|---|---|---|
| 2.1 | Temperature Range | -10°C~60°C |
| 2.2 | Humidity Range | 65%±10% |

**3. Mechanical Specification**

| No. | Item | Specification |
|---|---|---|
| 3.1 | Size | 22.4×12.5×22.8mm |
| 3.2 | Weight | 9g |
| 3.3 | Gear type | 1 metal gear+4plastic gear |
| 3.4 | Limit angle | 210°±5° |
| 3.5 | Horn type | Plastic, POM |
| 3.6 | Case | Engineering plastics(Pc) |
| 3.7 | Connector wire | 260mm±5mm |
| 3.8 | Motor | DC motor |

**4. Electrical Specification**

| No. | Operating voltage | 4.8V | 6.0V |
|---|---|---|---|
| 4.1 | Idle current | 5mA | 5mA |
| 4.2 | No-load speed | 0.10sec/60° | 0.09sec/60° |
| 4.3 | Running current | 80mA | 100mA |
| 4.4 | Peak stall torque | 1.3kg.cm | 1.7kg.cm |
| 4.5 | Stall current | 650mA | 750mA |

**5. Control Specification**

| No. | Item | Specification |
|---|---|---|
| 5.1 | Command signal | Pulse width modification |
| 5.2 | Amplifier type | Analog controller |
| 5.3 | Pulse width range | 1000~2000usec |
| 5.4 | Neutral position | 1500usec |
| 5.5 | Running degree | 120°±3°(when 900~2100usec) |
| 5.6 | Dead bandwidth | 8 uS |
| 5.7 | Rotating direction | Counterclockwise (when 1000~2000usec) |

## Guides for this product

- [Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi](https://core-electronics.com.au/guides/raspberry-pi/servo-hat-raspberry-pi/)

## Videos for this product

- [Setting up and Using the Adafruit 16-Channel Servo HAT for Raspberry Pi](https://core-electronics.com.au/videos/setting-up-and-using-the-adafruit-16-channel-servo-hat-for-raspberry-pi)

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/0/1/01-800x800.jpg)