# M5Stack ATOM Matrix v1.1 ESP32 Development Kit with BMI270 IMU

**Type:** Product page · **SKU:** CE11194 · **Brand:** [M5Stack](https://core-electronics.com.au/brands/m5stack-australia)
**Page:** https://core-electronics.com.au/m5stack-atom-matrix-v1-1-esp32-development-kit-with-bmi270-imu.html ([markdown](https://core-electronics.com.au/m5stack-atom-matrix-v1-1-esp32-development-kit-with-bmi270-imu.html.md))

Build a tilt-controlled remote or a Wi-Fi status light on a thumb-sized board you can program with UiFlow blocks or Arduino.

## Pricing

- **Price:** $33.37 (inc GST) — $30.34 AUD, exc GST

## Availability & dispatch

- Available with a lead time — expect dispatch between Nov 10 and Nov 23.

## Description

This 24 x 24mm, 7.3g ESP32 development board has a 5x5 RGB LED matrix on its face. Once programmed, that one small block can be the display, the input and the controller for your project.

Version 1.1 replaces the original ATOM Matrix's MPU6886 with a BMI270 six-axis IMU. This improves the accuracy and response speed of attitude detection, which matters most in motion capture and attitude control. If your project relies on precise orientation data, v1.1 is the version to choose. M5Stack lists the IMU as the only hardware change.

Example projects include a motion-sensing remote controller, a motion-capture or attitude-analysis node, and a compact central control node for a smart home.

### Features

- **Build tilt and gesture controls** by reading the board's orientation and movement directly in your code.
- **Show icons, status and animations at a glance** on 25 WS2812C-2020 RGB LEDs behind an acrylic screen. Keep brightness moderate; very high values can damage the LEDs and acrylic screen.
- **Turn a button press into a remote-control command**: the programmable button under the matrix can trigger the built-in infrared transmitter, using logic you write.
- **Connect your project to your network** over 2.4GHz Wi-Fi with an onboard 3D antenna.
- **Add sensors and mount it without soldering**, using the Grove port (I2C + I/O + UART), the 2.54mm pin sockets on both sides and the M2 screw hole on the back.
- **Program it in the environment you prefer**: UiFlow1, UiFlow2, Arduino IDE, ESP-IDF and PlatformIO are all supported.

### Specifications

| Property | Specification |
|---|---|
| **SoC** | ESP32-PICO-D4, Xtensa 32-bit LX6 dual-core, up to 240MHz (600 DMIPS) |
| **SRAM** | 520KB |
| **Flash** | 4MB |
| **Wireless** | 2.4GHz Wi-Fi, 3D antenna |
| **IMU** | BMI270 6-axis (I2C 0x68) |
| **RGB LEDs** | 25x WS2812C-2020 (5x5 matrix) |
| **Infrared** | IR transmitter |
| **Buttons** | 1x programmable, 1x reset |
| **Interfaces** | 1x USB Type-C, 1x Grove HY2.0-4P (I2C + I/O + UART), 2.54mm pin sockets |
| **Pin assignments** | RGB LED data G27; button G39; IR TX G12; IMU SCL G21 / SDA G25; Grove: GND, 5V, G26, G32 |
| **Input voltage** | 5V @ 500mA |
| **Power consumption** | 5V @ 61.65mA |
| **Operating temperature** | 0 to 60°C |
| **Dimensions** | 24.0 x 24.0 x 13.9mm |
| **Weight** | 7.3g |
| **Package size / gross weight** | 85.0 x 66.0 x 15.0mm / 13.5g |

### Resources

- [Atom-Matrix v1.1 Docs | M5Stack](https://docs.m5stack.com/en/products/sku/C008-B-V11)

### What's Included

- 1x ATOM Matrix v1.1

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/C/E/CE11194_ecommerce_1790577125012.jpg)