LulzBot Long Block Hot End Kit, 1.2mm

SKU: CE05569 Brand: LulzBot

Retired Product

Replaced by: Ultimaker

This product has been replaced by: Ultimaker
This product is no longer available. This page is only for reference.

Accomplish MOAR with the LulzBot Long Block All Metal Hot End. Suited for RepRap and other DIY 3D printers, this hot end features an extra-long heater block paired with a large 1.2 mm nozzle diameter to enable faster 3D printing rates and stronger objects.

While the Long Block Hot End is used in the LulzBot TAZ MOARstruder Tool Head, this hot end will require connector customization and/or modification.

Compatibility notice

This LulzBot Long Block Hot End is not a drop-in replacement for the LulzBot TAZ MOARstruder Hot End due to wiring differences that require additional steps for use. It is designed for RepRap and DIY 3D printers.

This all metal hot end requires active cooling. We recommend using the same 5 Volt 40mm Pelonis Low Flow Fan that we use on our LulzBot TAZ and LulzBo Mini.

Works with: LulzBot TAZ 6, LulzBot TAZ 5

Features

The large thermal mass of the extra-long heater block in the LulzBot Long Block Hot End provides a longer filament melting zone. This longer melting zone allows for extruding at lower temperatures or at faster rates of over 100 grams (3.53 oz) per hour. That's a kilogram (2.2 pounds) in 10 hours, and over 2.27 kilograms (5 pounds) of filament in a 24 hour period.

This hot end is perfect for large objects that require using the full build area of the LulzBot TAZ or other large format 3D printers, due to the large nozzle diameter of 1.2 mm. This allows for layer heights of 0.3 mm to 1.2 mm and for thicker extrusion widths, leading to stronger internal structures and single-walled printed objects, like vases, pipes, and containers. 3D print with smaller layers for strong walls and infill.

Larger layer heights will be translucent, shiny, and MOAR eye-catching when used with translucent filament such as t-glase, nGen, and INOVA-1800.

Parts Included

Assembled Long Block Hot End with Terminated Connectors:
24v Ceramic Heater Cartridge
NTC 100k Thermistor
Bed probing wire, terminated with Connector Pin
LulzBot All-Metal Hot End Aluminum Mounting Plate
Heater and Thermistor Wire Extension, Partially Terminated with Connectors

Specifications

Required Filament Diameter: 3 mm
Hot End Temperature Range: 120°C-300°C
Recommended Layer Heights: 0.3 mm-1.2 mm
Nozzle Diameter: 1.2 mm
Required Power System: 24 V
Required Replacement Tool Head Mount: MOARstruder Tool Head Mount 3D Model

Additional Items Recommended

MOARstruder Extruder Body 3D Model
MOARstruder Extruder Body Brace 3D Model
Fans: Heat Sink and Dual Print Cooling Fans

This product is listed in:

Retired

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$6+ for Standard Post (typically 6+ business days, tracked)
$10+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$11+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review