LinkIt Connect 7681 Module - Scale for Wi-Fi solution (Seeed Studio)

SKU: SS317060009 Brand: Seeed Studio

Retired Product

Search for an alternative
This product has been retired. It is no longer available, but this page has been kept for reference.
The LinkIt™ Connect  7681 module  is a low-cost, low-power consumption component for IoT devices. The module integrates the MediaTek MT7681, which supports single stream IEEE 802.11b/g/n, provides GPIO and PWM for intelligent control and a UART interface for device communication.
 
The module includes an integrated Wi-Fi antenna and IPEX socket for an external antenna. 8Mbits flash helps reduce your platform size, along with a power management unit for a single 3.3V power source for cost effective design.
 
The 32-bit RISC MCU offers 802.11b/g/n drivers, supplicant and TCP/IP protocol stack for networking applications, and can operate in station or softAP mode. The module is therefore an ideal solution for embedded devices needing to enable networking services with minimal design effort.
 
The LinkIt™ Connect 7681 module is part of the LinkIt™ Connect 7681 development platform from MediaTek Labs. This development platform delivers you the tools and documentation to prototype your IoT device and create its final design, which you will complete with this module before delivery to your customers. This module is included in the LinkIt™ Connect 7681 development board.
 

Features:

  • Small footprint:18 mm x 15 mm x 1.7 mm
  • Single stream IEEE 802.11 b/g/n
  • 32-bit RISC microprocessor as the host MCU
  • Embedded IEEE 802.11 b/g/n drivers, supplicant, and TCP/IP stack
  • Highly integrated RF PA, LNA and RF switch
  • Integrate Wi-Fi antenna and IPEX socket for an external antenna
  • 8Mbits flash
  • Integrate high efficiency switching regulator for single 3.3V power source
  • Security support for WPA personal (WPA-PSK), WPA2 personal (WPA2-PSK) and WPA/WPA2 personal 
  • Operation in station mode or softAP mode
  • Rich interfaces, UART, PWM and GPIOs
  • RoHS & Halogen free compliant / Lead free

 

Specification:

  • Network Standard: IEEE 802.11b/g/n
  • Host Interfaces: UART / GPIO (or PWM)
  • Temperature Storage:-40℃ ~ +85℃
  • Operating:-10℃ ~ +70℃
  • Humidity Operating:10 ~ 95% (Non-Condensing)
  • Storage:5 ~ 95% (Non-Condensing)
  • Dimensions: 18 mm x 15 mm x 1.7 mm
  • Package: LGA

This product is listed in:

Retired

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Days2Bin: Pico Powered Bin Reminder

Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...

Raspberry Pi Video Looper Display Installation | Overshare Video Festival

IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...
IntroductionA suspended ceiling display of forty repurposed screens and displays, each screening cr...

Mailbox Delivery Notification System

Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Introduction During the Covid lockdown, I needed something to do. The Postman or woman does not de...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.