# KiwiSDR Kit (Seeed Studio)

**Type:** Product page · **SKU:** SS110060490 · **Brand:** [Seeed Studio](https://core-electronics.com.au/brands/seeed-studio-australia)
**Page:** https://core-electronics.com.au/kiwisdr-kit-seeed-studio.html ([markdown](https://core-electronics.com.au/kiwisdr-kit-seeed-studio.html.md))

## Retired product

This product is retired and no longer available for purchase. Search the catalogue for an alternative.

## Description

KiwiSDR is a software-defined radio (SDR) covering shortwave, the longwave &amp; AM broadcast bands, various utility stations, and amateur radio transmissions, world-wide, in the spectrum from 10 kHz to 30 MHz. The KiwiSDR is a custom circuit board (cape) you connect to the BeagleBone GreenorBeagleBone Black computer. You simply add an antenna, power supply and network connection. The KiwiSDR is available in two versions: the [cape alone](https://www.seeedstudio.com/KiwiSDR-Board-p-2723.html) and a more complete version including BBG, enclosure and GPS antenna. Both versions include software supplied on a micro-SD card.

An HTML5-capable browser and internet connection will let you listen to a public KiwiSDR anywhere in the world. Up to four people can listen simultaneously to one radio — each listener tunes independently.

Try it right now! Listen to KiwiSDR registered on the sdr.huwebsite.

**Features**

- 100% Open Source / Open Hardware.
- Browser-based interface allowing four simultaneous user web connections.
- Each connection tunes an independent receiver channel over the entire spectrum.
- Waterfall tunes independently of audio and includes zooming and panning.
- Multi-channel, parallel DDC design using bit-width optimized CIC filters.
- Good performance at VLF/LF since we personally spend time monitoring those frequencies.
- Automatic frequency calibration via received GPS timing.
- Easy hardware and software setup. Browser-based configuration interface.
- Extension interface for adding decoders and utilities.

**Specification**

- SDR covers the 10 kHz to 30 MHz (VLF-HF) spectrum.
- Web interface based on OpenWebRX from András Retzler, HA7ILM.
- Demodulation modes: AM, AMN, LSB, USB, CW, CWN, NBFM.
- Extensions at present: WSPR viewer/decoder, IQ display, Loran-C      viewer.
- RF antenna connector: SMA and terminal block.
- Integrated software-defined GPS receiver from Andrew Holme's Homemade GPS Receiver.
- GPS receives the Navstar system on L1 frequency 1575.42 MHz.
- GPS antenna connector: SMA, 3.3V powered for active antennas.
- Voltage: +5V DC, 2.1mm jack, center pin positive.
- Current: 1.5A including Beagle, KiwiSDR powers Beagle through header connectors.
- Dimensions: KiwiSDR PCB 117mm \* 55mm, SMA connectors additional.

**Part List**

- 1 x KiwiSDR Board
- 1 x Beaglebone Green
- 1 x Unassembled enclosure
- 1 x Skyworks SE4150L GPS front-end antenna
- 1 x Micro-SD Card

**Documents**

- For source code and issues list, please visit our [Github](https://github.com/jks-prv/Beagle_SDR_GPS)page.
- For technical discussion, please come to our Forum.
- For projects that you would like to share with the community, please visit [Recipe](https://www.seeed.cc/projects.html#recipe).

## Images

- [Product image 1](https://core-electronics.com.au/media/catalog/product/q/2/q2vwg8rznkfe9411g2gxvx0u.jpg)
